Estimating signal strengths in the design of an indoor wireless network

One issue in the design and implementation of a wireless local area network is the selection of access point (AP) locations. Proper AP placement is necessary to provide adequate signal coverage and also to minimize cochannel coverage overlap. The impact of incorrect placement of APs is significant. Placing APs too far apart can lead to gaps in coverage. On the other hand, placing the units too close together leads to excessive cochannel coverage overlap, degrading system performance. Currently, AP placement involves a "trial and error" technique. When a technician tests the effect of moving an AP from one location to another, it is necessary to spend considerable time manually measuring signal strengths in order to determine how this move affects the AP's coverage area. In this letter, we describe a procedure for estimating the coverage areas of relocated APs. The procedure can be used as part of a manual design process or as part of an automated design tool.     

Multibody simulation tool for the calculation of lashing loads on RoRo ships

Approximately 80% of the international transport of goods is carried on by means of ships. A large portion of the transport capacity is represented by Roll-on-Roll-off (RoRo) ships. Especially in Europe this is a relevant potential for the RoRo segment. Consequently, the design and construction of RoRo ships plays an increasing role for German shipyards and their suppliers. In order to make the loading and unloading procedure of trailer economically more competitive, ship owners would like to improve the lashing of trailers on the ship. On the basis of a multibody system formalism, a software tool has been developed which allows for an optimization of the loading of trailers on RoRo ships. Commemorative Contribution.     

Coefficient of friction and subjective assessment of slippery work surfaces.

Research was conducted to determine how well subjects could distinguish between surfaces with different coefficient of friction (COF) values and to evaluate how well subjective ratings of slipperiness correlated with the actual COF values. Thirty-three ironworkers experienced in working and walking on steel surfaces and 23 university students inexperienced with these tasks participated in the study. Subjective slipperiness ratings for a variety of climbing and walking conditions were obtained from the subjects. It was found that subjects could identify differences in the slipperiness of four types of steel coatings tested in the study. There was a high correlation between the subjective ratings and the measured COF values. Subjects did not slip at a COF of 0.41 but did lose footing at a COF of 0.20.     

Zur Selbstdiffusion von Benzol und Azeton in Polymethylmethacrylat

The selfdiffusion coefficients of acetone and benzene are studied in the systems acetone/poly(methylmethacrylate) and benzene/poly(methylmethacrylate) by means of the spin echo technique as function of concentration and temperature. From the dependence of temperature, the activation energies are calculated as function of concentration. The dependence of concentration of the selfdiffusion coefficients is discussed using the theory of Free Volume according to FUJITA. The Free Volume of the poly(methylmethacrylate) is calculated as function of temperature.     

The Price of Anarchy in Network Creation Games Is (Mostly) Constant

We study the price of anarchy and the structure of equilibria in network creation games. A network creation game is played by n players {1,2,…,n}, each identified with a vertex of a graph (network), where the strategy of player i, i=1,…,n, is to build some edges adjacent to i. The cost of building an edge is α>0, a fixed parameter of the game. The goal of every player is to minimize its creation cost plus its usage cost. The creation cost of player i is α times the number of built edges. In the SumGame variant, the usage cost of player i is the sum of distances from i to every node of the resulting graph. In the MaxGame variant, the usage cost is the eccentricity of i in the resulting graph of the game. In this paper we improve previously known bounds on the price of anarchy of the game (of both variants) for various ranges of α, and give new insights into the structure of equilibria for various values of α. The two main results of the paper show that for α>273?n all equilibria in SumGame are trees and thus the price of anarchy is constant, and that for α>129 all equilibria in MaxGame are trees and the price of anarchy is constant. For SumGame this answers (almost completely) one of the fundamental open problems in the field—is price of anarchy of the network creation game constant for all values of α?—in an affirmative way, up to a tiny range of α.     

Solders development and application process for a micro chip-camera

Nowadays, micro components have to fulfill rising optical requirements for different scientific and industrial fields like astronomy, medicine or multimedia. For this purpose, advanced miniaturized chip-cameras are produced for the microsystems engineering market. The assembly and joining technologies play a very important role in the production of these micro components. Several challenges are associated with the joining of chip-cameras. In this study, the application of the soldering technology has been considered in order to face these challenges. Two joining technologies have been investigated: active soldering and transient liquid phase (TLP) bonding. Both soldering processes have shown a big potential for hybrid microsystems joining in previous studies. For both processes, soldering alloys and parameters have been conceived in order to fulfill the joining requirements of the micro camera components. For instance, the joining temperature represents a major challenge because the chip-camera consists of a plastic material, polymethyl methacrylate (PMMA). Therefore, particular attention has been directed to the soldering as well as to the coating temperature. The experimental investigations concerning the solders application through physical vapor deposition (PVD) have been supported by finite element method (FEM) simulations. The analysis of  the temperature distribution in the micro components during the coating process was the focus of  the calculations. Possible undesirable local overheated areas of the chip-camera components can be detected through simulation.

---

Novel bacterial structures in human blood: cultural isolation

Evidence for the existence of a novel bacteriological system has been obtained from osmotically lysed and filtered human blood (membrane filters with a pore size of 0.22 micronm) placed in special culture media. These blood filtrates gave rise to ordinary bacteria for 71% of the blood specimens processed from diseased humans and for 7% of those from supposedly normal humans. Morphologically, the bacteria resembled streptococcal, staphylococcal, and gram-positive filamentous (cocco-bacillary) forms. Prior to the appearance of bacteria in the media, large and small "dense bodies" were microscopically observed but disappeared when ordinary bacteria were apparent, Cultures of of unlysed blood as conventionally performed were negative. These organisms may represent an adaptation of certain bacteria to life in the blood.     

Applying quality control charts to the analysis of single-subject data sequences

Techniques from the field of quality control can be used to classify the quality of individual samples of physical or cognitive performance. After stable baselines have been established for an individual, deviations in performance can be evaluated using control charts. The effectiveness of this approach in evaluating cognitive performance was tested using databases collected under a variety of risk factors. The sensitivity and specificity characteristics of Shewhart, cumulative-sum (CUSUM), and exponentially weighted moving average (EWMA) control charts were determined for a total of 174 trials involving 10 participants and 23 cognitive performance assessment measures. The most effective technique in each case was typically a function of the specific performance measure and the type of performance change being evaluated. Sensitivity and specificity for the best techniques were as high as 100%. This study demonstrated the usefulness of quality control charts as a tool to evaluate individual participant performance over time. Actual or potential applications of this research include readiness-to-perform screening of industrial workers in order to improve the health and safety of the workforce.     

Formation of a Tribologically Transformed Surface (TTS) on AISI 1045 Steel by Friction Stir Processing

Superficial nanostructuration by friction stir processing (FSP) experiments has been carried out on samples of AISI 45 steel. Sixteen tests were carried out, with a traverse speed in the range of 10–70 mm/min and 900–1800 N for the normal force at a constant rotational speed of 2000 rpm, in order to determine the optimal conditions for the process applied to this material and to test its feasibility. The results obtained have shown that FSP in this range of parameters leads to the formation of a stirred layer of small grains (30 times smaller than the initial grains) with high hardness (approximately doubled). When the load is higher than 1500 N and the traverse speed is superior to 50 mm/min, a white layer (WL) with very high hardness can be produced. It has also been determined that the increase of the stirred layers’ thickness is almost linked to the increase of the normal force.