Verhalten von Furnierlagenholz bei schlagartiger Beanspruchung

42 different plywoods consisting of a maximum number of 9 beechveneers were investigated. This report describes the relations between the composition of the panels and the impact bending behavior. Recommandations are given for the manufacture of plywood with a high shock resistance.     

Determination of the steady state of an oscillator by a combinedtime-frequency method

A novel method for the computation of the steady state of nonlinear oscillators including distributed elements is presented which exploits advantages of both time-domain and frequency-domain simulation. The oscillator network is divided into a linear subnetwork described by a hybrid matrix in the frequency domain and a nonlinear differential equation solved in the time domain. The periodic steady state of the oscillator is shown to be equivalent to the solution of a boundary value problem, where the boundary conditions are given at a set of points along the time axis. For the solution of the boundary value problem the multiple shooting algorithm is applied. It is shown that the bandwidth in the nonlinear subnetwork can be chosen arbitrarily high regardless of the number of harmonics at the ports connecting the subnetworks. In order to demonstrate the feasibility of the method and to discuss the error mechanisms it is applied to two examples: a Clapp oscillator including a piecewise-linear characteristic and an integrated GaAs MESFET oscillator at 10.7 GHz     

Biophysical Model of Larval Yellow Perch Advection and Settlement in Lake Michigan

Potential for large-scale physical transport processes to affect recruitment of Lake Michigan yellow perch (Perca flavescens) was studied by examining the variation in larval distribution, growth rate, and settlement during June–August 1998–2003 using a 3D particle transport model linked with an individual-based bioenergetics growth model. In all years, virtual larvae were released nearshore in southwestern Lake Michigan, a known and important spawning region for yellow perch. For any given year, the same circulation pattern and water temperature either promoted or reduced yellow perch settlement depending on the consumption rates and settlement size chosen in the growth model. Increased consumption increased the number of settled larvae and expanded the total area where larvae settled, whereas increased settlement size reduced the number of settled larvae and reduced the overall settlement area. Interannual variability in circulation patterns and water temperature also resulted in contrasting larval settlement rates, settlement locations, and size of settlement areas between years. Model predictions were most consistent with field observations of age-0 yellow perch from Illinois and Michigan waters when settlement was assumed to occur at 50 mm. Moreover, our model suggests that larvae originating from southwestern Lake Michigan can recruit anywhere within the southern basin and even in the northern basin. Future model improvement will require information on the relative contribution of various sectors to the larval pool, their distribution with reference to the hydrodynamic landscape, the feeding and growth of yellow perch during their pelagic phase, and the size at transition to demersal stage.     

Effect of structure controlled deposited layers on the retention of flavour compounds in reverse osmosis

Deposited layers are often negative phenomena of membrane processes. They reduce flux and elongate the time for concentration or separation. Electron micrographs made by other investigators have shown that the deposit is compact adjacent to the membrane and spongy on top. The compact layer is as homogeneous as the active layer of the membrane; therefore, it may have the same retention behaviour as the membrane.

Our objective has been to investigate the rejection behaviour of deposit layers in reverse osmosis. Membrane fouling was caused by whey proteins and skin milk proteins with or without additional heat treatment. After the forming of the deposited layer the rejection of apple juice flavour was determined and compared with an experiment without a deposited layer. The measurements show that the rejection could be influenced depending on the treatment of the layer.     

Deliberate word access: an intuition,a roadmap and some preliminary empirical results

No doubt, words play a major role in language production, hence finding them is of vital importance, be it for writing or for speaking (spontaneous discourse production, simultaneous translation). Words are stored in a dictionary, and the general belief holds, the more entries the better. Yet, to be truly useful the resource should contain not only many entries and a lot of information concerning each one of them, but also adequate navigational means to reveal the stored information. Information access depends crucially on the organization of the data (words) and the access keys (meaning/form), two factors largely overlooked. We will present here some ideas of how an existing electronic dictionary could be enhanced to support a speaker/writer to find the word s/he is looking for. To this end we suggest to add to an existing electronic dictionary an index based on the notion of association, i.e. words co-occurring in a well balanced corpus, the latter being supposed to represent the average citizen’s knowledge of the world. Before describing our approach, we will briefly take a critical look at the work being done by colleagues working on automatic, spontaneous or deliberate language production,—that is, computer-generated language, simulation of the mental lexicon, or WordNet (WN),—to see how adequate they are with regard to our goal.     

Vacuum Insulation Panels – Exciting Thermal Properties and Most Challenging Applications

Vacuum insulation panels (VIPs) have a thermal resistance that is about a factor of 10 higher than that of equally thick conventional polystyrene boards. VIPs nowadays mostly consist of a load-bearing kernel of fumed silica. The kernel is evacuated to below 1 mbar and sealed in a high- barrier laminate, which consists of several layers of Al-coated polyethylene (PE) or polyethylene terephthalate (PET). The laminate is optimized for extremely low leakage rates for air and moisture and thus for a long service life, which is required especially for building applications. The evacuated kernel has a thermal conductivity of about 4 × 10⁻³ W · m⁻¹ · K⁻¹ at room temperature, which results mainly from solid thermal conduction along the tenuous silica backbone. A U-value of 0.2 W · m⁻² · K⁻¹ results from a thickness of 2 cm. Thus slim, yet highly insulating fa?ade constructions can be realized. As the kernel has nano-size pores, the gaseous thermal conductivity becomes noticeable only for pressures above 10 mbar. Only above 100 mbar the thermal conductivity doubles to about 8 × 10⁻³ W · m⁻¹ · K⁻¹, such a pressure could occur after several decades of usage in a middle European climate. These investigations revealed that the pressure increase is due to water vapor permeating the laminate itself, and to N₂ and O₂, which tend to penetrate the VIP via the sealed edges. An extremely important innovation is the integration of a thermo-sensor into the VIP to nondestructively measure the thermal performance in situ. A successful “self-trial” was the integration of about 100 hand-made VIPs into the new ZAE-building in Würzburg. Afterwards, several other buildings were super-insulated using VIPs within a large joint R&D project initiated and coordinated by ZAE Bayern and funded by the Bavarian Ministry of Economics in Munich. These VIPs were manufactured commercially and integrated into floorings, the gable fa?ade of an old building under protection, the roof and the facades of a terraced house as well as into an ultra-low-energy “passive house” and the slim balustrade of a hospital. The thermal reliability of these constructions was monitored using an infrared camera.Invited paper presented at the Seventh European Conference on Thermophysical Properties, September 5-8, 2005, Bratislava, Slovak Republic.     

Enhancing the efficiency of alternating current driven organic light-emitting devices by optimizing the operation frequency

We report efficient and bright organic light-emitting devices operated by capacitive energy coupling. In this approach, the organic layers are enclosed between sputter-deposited hafnium dioxide layers to prevent charge carrier injection. When a sinusoidal voltage signal is applied to the electrodes, the devices emit bright green light whereas no detectable emission is generated upon application of a constant voltage. The efficiency of the process depends heavily on the frequency of the applied voltage signal. By optimizing the driving scheme, a record luminous efficacy for AC driven OLEDs of 2.7 lm/W at 500 cd/m² is achieved.