Improving Short-Circuit Current Capacity, Resistance, and Breaking Load of OPGW Constructions by Modifying Aluminium Alloy With AlB2

This article presents a method that can be applied to molten AA-6101 alloy to improve electrical properties of the aluminium part of the optical ground wire (OPGW) used in overhead transmission lines to protect phase conductors from lightning strike and to transmit signals and data. AA-6101 alloy in casting of the log as 6 m length and 178 mm diameter for extrusion has been inoculated by AlB₂ to decrease detrimental effects of Cr, Ti, V, and Zr on the conductivity of the material. After inoculation, improved billets were extruded as 9.5 mm diameter feedstock. Required wires drawn from the feedstock according to the construction types of OPGW to be tested were exposed to aging at 175°C, 6 h (T-8). Upon completion of the back-twist and performing-type stranding process, resistance, and short-circuit current capacity and breaking load of the OPGW 88/44 constructions with other metal combinations have been examined and tested to show improvement. Results are summarized in tables and graphically.     

Supercritical fluid extraction of daphne (Laurus nobilis L.) seed oil

Laurus nobilis L., commonly known as daphne tree, is an evergreen that belongs to the Lauraceae family. Daphne trees produce grape-sized shiny purplish berries having three parts: flesh, skin, and an inner kernel (single seed). This study examines supercritical CO₂ (SC-CO₂) extraction of oil from daphne seeds. The oil yield of ground seeds varied from 14 to 28% depending on the method and particle size used for oil recovery. Yields were similar for both petroleum ether and SC-CO₂ extraction. The extraction yield decreased significantly with increasing particle size. The amount of extract collected increased exponentially with increasing SC-CO₂ pressure. The highest extraction yield was obtained at the highest temperature studied, 75°C. More than 45% of the oil was lauric acid. SC-CO₂ is a viable technique to obtain high-purity L. nobilis L. seed oil, which is a potential ingredient for the cosmetic industry.     

Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich alloys

In this systematic study, dispersion-strengthening effect of the Cu–25.91Mn (wt.%), Cu–26.62Mn–8.99Al (wt.%), Cu–22.17Mn–12.32Zn (wt.%) ingot alloys have been investigated. Samples were homogenized at a high fixed temperature in different periods and cooled with different cooling rates. After processes, microanalysis of the samples were interpreted by using scanning electron microscope (SEM) and weight percentages of the elements of the occurrence phases in the samples obtained by using electron dispersion spectroscopy (EDS) technique. Additionally, some characteristic properties of the heat treated samples with different conditions of Cu–Mn, Cu–Mn–Al, Cu–Mn–Zn ingot alloys were also discussed.     

A new QoS-aware TDMA/FDD MAC protocol with multi-beam directional antennas

With the ever-increasing demand for wireless real-time services and continuing emergence of new multimedia applications especially for mobile users, it is necessary for the network to support various levels of quality of service (QoS) while maximizing the utilization of scarce and expensive wireless channel resources. Considering this fact, a new TDMA/FDD MAC protocol integrating a novel QoS management algorithm and multi-beam Directional Antennas (DAs) to efficiently exploit wireless resources has been developed and presented in this paper. It supports all ATM CBR, VBR, ABR and UBR service classes by adopting a well-managed dynamic guarantee-based QoS scheduling algorithm. The work mainly aims at increasing the wireless system throughput as well as improving the call-blocking ratios and end-to-end delays for real-time applications. This seamless communication enables both handling real-time multimedia traffics in a fair manner and granting call requests on the basis of the connection types. The system has been developed, modeled and simulated using OPNET Modeler. The simulation results show that the QoS-aware TDMA/FDD MAC with multi-beam DAs has substantially increased the system throughput and that the call-blocking ratio has been reduced from 86% to 18%, when the proposed MAC with 8-Beam antennas is employed instead of the regular MAC.     

A set of new Chebyshev kernel functions for support vector machine pattern classification

In this study, we introduce a set of new kernel functions derived from the generalized Chebyshev polynomials. The proposed generalized Chebyshev polynomials allow us to derive different kernel functions. By using these polynomial functions, we generalize recently introduced Chebyshev kernel function for vector inputs and, as a result, we obtain a robust set of kernel functions for Support Vector Machine (SVM) classification. Thus in this study, besides clarifying how to apply the Chebyshev kernel functions on vector inputs, we also increase the generalization capability of the previously proposed Chebyshev kernels and show how to derive new kernel functions by using the generalized Chebyshev polynomials. The proposed set of kernel functions provides competitive performance when compared to all other common kernel functions on average for the simulation datasets. The results indicate that they can be used as a good alternative to other common kernel functions for SVM classification in order to obtain better accuracy. Moreover, test results show that the generalized Chebyshev kernel approaches to the minimum support vector number for classification in general.     

Estimation of target station data using satellite data and deep learning algorithms

In this study, an innovative model has been developed for wind speed estimation through the Deep Learning method using hourly wind speed data from the measurement stations of the General Directorate of Meteorology in Van and Hakkari provinces in Turkey in conjunction with simultaneous satellite images from Eumetsat. Obtained satellite images were used during the introduction of the model, while wind speed data were used at the output stage. As a result of the findings, it was found that 85% accuracy performance could be achieved to provide sufficient insight for systems that are widely established worldwide. The model, developed as a result of the study, eliminates the need to install wind measuring stations for any region on earth within the satellite field in terms of determining wind potential. Since the field of view of the Meteosat 7 satellite covers the whole of Eastern Europe, it was determined that it could predict a high rate of up to 6 hours later by the method used in image analysis. The systems to be controlled with this method will be able to examine the weather events instantly at each point in the satellite field of view and make more accurate decisions. Also, companies will be able to perform a more detailed and rapid field scan compared to existing limited methods, and reduce initial investment costs and operating costs in terms of renewable energy resources investments.     

Phase Transfer Catalysis with Quaternary Ammonium Type Gemini Surfactants: <Emphasis Type="Italic">O</Emphasis>-Alkylation of Isovanillin

In this paper, O-alkylation of isovanillin with unusual phase transfer catalysts alkandiyl-α,ω-bis(dimethylalkylammonium bromide) dimeric surfactants (also known as gemini surfactants) is described. Some dimeric surfactants with simple hydrophobic alkyl chains and others with hydrophobic alkyl chains containing ester functionalities with different lengths were synthesized and characterized in our laboratory. The alkylation of isovanillin with alkyl halide was successively carried out in the presence of potassium carbonate and a phase transfer catalyst in tetrahydrofuran. The same reactions were also performed with both the traditional phase transfer catalyst tetrabutylammonium bromide and without any catalyst. The results were compared with those of dimeric surfactants. Consequently, it was expressed that alkandiyl-α,ω-bis(dimethylalkylammonium bromide) dimeric surfactants successively exhibit the character of phase transfer catalysts through environmentally friendly procedures under mild conditions. The most significant feature of this work is that dimeric surfactants have been determined to act as phase transfer agents.     

Processing and Properties of Textured Potassium Sodium Niobate [K,Na]NbO3 Ceramic Ribbons by Alginate Gelation Method

Random and <001> textured potassium sodium niobate – [K,Na]NbO₃ (KNN) ceramics with 1 mole% CuO sintering aid were fabricated in ribbon form through a combination of novel alginate gelation process and templated grain growth methods using platelike sodium niobate ‐ NaNbO₃ (NN) template particles. The platelike NN template particles were prepared by a two‐step molten salt synthesis method. Ribbons were drawn from alginate‐based slurries without or with 10 wt% NN template particles using 50 mm long slit nozzle with a rectangular orifice of 10 mm × 1 mm. Development of crystallographic texture as a result of varying sintering time and temperature was evaluated through the calculation of the degree of orientation as measured by the Lotgering factor (?₍₀₀₁₎) and an ?₍₀₀₁₎ of 0.81 was achieved. The electrical properties of textured ribbons were evaluated with polarization and strain versus electric field measurements.