The effect of Co addition on the formation of Ni-Ti clusters in maraging stainless steel was studied by three dimensional atom probe (3DAP) and first-principles calculation. The cluster analysis based on the maximum separation approach showed an increase in size but a decrease in density of Ni-Ti clusters with increasing the Co content. The first-principles calculation indicated weaker Co-Ni (Co-Ti) interactions than Co-Ti (Fe-Ti) interactions, which should be the essential reason for the change of distribution characteristics of Ni-Ti clusters in bcc Fe caused by Co addition. 相似文献
Standard Gibbs free energy of formation (ΔGf0), an important property needed in design calculations has been estimated using molar refraction, RM. The linear relationships derived between ΔGf0 and RM tested with the data on 8 series of hydrocarbons at 228 compounds yielded average deviations comparable to the methods cited in recent literature. The method can be used as an alternative to the existing ones, because of its simplicity combined with reasonable accuracy. 相似文献
Thin films of cadmium sulphide and cadmium telluride have been prepared by thermal evaporation under various conditions of deposition. These films have been characterized optically. electrically and for structure determination. The results of these characterizations along with the initial results of all thin film CdS/CdTe solar cells are presented in this paper 相似文献
A mobile ad hoc network (MANET) is dynamic in nature and is composed of wirelessly connected nodes that perform hop-by-hop routing without the help of any fixed infrastructure. One of the important requirements of a MANET is the efficiency of energy, which increases the lifetime of the network. Several techniques have been proposed by researchers to achieve this goal and one of them is clustering in MANETs that can help in providing an energy-efficient solution. Clustering involves the selection of cluster-heads (CHs) for each cluster and fewer CHs result in greater energy efficiency as these nodes drain more power than noncluster-heads. In the literature, several techniques are available for clustering by using optimization and evolutionary techniques that provide a single solution at a time. In this paper, we propose a multi-objective solution by using multi-objective particle swarm optimization (MOPSO) algorithm to optimize the number of clusters in an ad hoc network as well as energy dissipation in nodes in order to provide an energy-efficient solution and reduce the network traffic. In the proposed solution, inter-cluster and intra-cluster traffic is managed by the cluster-heads. The proposed algorithm takes into consideration the degree of nodes, transmission power, and battery power consumption of the mobile nodes. The main advantage of this method is that it provides a set of solutions at a time. These solutions are achieved through optimal Pareto front. We compare the results of the proposed approach with two other well-known clustering techniques; WCA and CLPSO-based clustering by using different performance metrics. We perform extensive simulations to show that the proposed approach is an effective approach for clustering in mobile ad hoc networks environment and performs better than the other two approaches. 相似文献
In the design phase of business and IT system development, it is desirable to predict the properties of the system-to-be. A number of formalisms to assess qualities such as performance, reliability and security have therefore previously been proposed. However, existing prediction systems do not allow the modeler to express uncertainty with respect to the design of the considered system. Yet, in contemporary business, the high rate of change in the environment leads to uncertainties about present and future characteristics of the system, so significant that ignoring them becomes problematic. In this paper, we propose a formalism, the Predictive, Probabilistic Architecture Modeling Framework (P2AMF), capable of advanced and probabilistically sound reasoning about business and IT architecture models, given in the form of Unified Modeling Language class and object diagrams. The proposed formalism is based on the Object Constraint Language (OCL). To OCL, P2AMF adds a probabilistic inference mechanism. The paper introduces P2AMF, describes its use for system property prediction and assessment and proposes an algorithm for probabilistic inference. 相似文献
Visual Cryptography (VC) is gaining attraction during the past few years to secure the visual information in the transmission network. It enables the visual data i.e. handwritten notes, photos, printed text, etc. to encrypt in such a way that their decryption can be done through the human visual framework. Hence, no computational assistance is required for the decryption of the secret images they can be seen through naked eye. In this paper, a novel enhanced halftoning-based VC scheme is proposed that works for both binary and color images. Fake share is generated by the combination of random black and white pixels. The proposed algorithm consists of 3 stages i.e., detection, encryption, and decryption. Halftoning, Encryption, (2, 2) visual cryptography and the novel idea of fake share, make it even more secure and improved. As a result, it facilitates the original restored image to the authentic user, however, the one who enters the wrong password gets the combination of fake share with any real share. Both colored and black images can be processed with minimal capacity using the proposed scheme.
Due to the limitation of node energy resources, the management of energy consumption is one of the most important problems of the internet of things (IoT). Therefore, many studies have tried to optimize and manage energy consumption by focusing on different techniques. Although each of these studies has improved and optimized energy consumption, there are many important problems, including maintaining traffic balance and energy consumption of network nodes. Therefore, a new method is necessary to maintain the load and energy balancing of network nodes. Therefore, this paper introduces energy and load balancing routing protocol for IoT (ELBRP) based on the development of the RPL routing protocol and the efficiency of data distribution technique. The ELBRP performance has three steps. In the first step, along with the process of sending DODAG information object (DIO) messages, the status of network nodes is evaluated. In the second step, the DODAG communication graph is formed according to the ELBRP. In the third step, data transmission is done according to the distribution technique with the goal of balancing traffic and energy. The simulation results using cooja simulator showed the superiority of ELBRP in improving energy consumption and successful delivery ratio, reducing delay and increasing the network lifetime compared to the similar methods. 相似文献
Abstract A regional study of Selenium (Se) speciation in surface waters, groundwaters, and saturation extracts from Soan-Sakesar valley Salt-Range, Pakistan was started in March 1994 and completed in October 1996. Groundwaters, streams, and springs had median concentrations of: total Se 48, 404.5, and 82 μg/l; Se+VI 40, 350 and 51 μg/l; Se+IV 8, 48 and 29 μg/l; Se-II 0, 6.5 and 2.0 μg/l, respectively. The concentration of Se exceeded the recommended water quality guidelines for drinking and irrigation water of 10 and 20 μg/l, respectively. In saturation extracts, median total Se, Se+VI, Se+IV and Se-II were 190, 146, 37 and 7.0 μg/l, respectively. Uchhali, Khabbaki and Jahlar lake water samples had the mean concentration of: total Se 2103, 670 and 297 μg/l; Se+VI 1777, 470, and 233 μg/l; Se+IV 291, 166 and 39 μg/l; Se-II 35, 34 and 25 μg/l, respectively. The Sakesar limestone Formation of Eocene age rich in shales and fossils (median Se concentration 7.2 μg/kg) are considered to be the source of selenium that have enriched soils of Soan-Sakesar valley. Selenim speciation results show the abundance of selenate in all the environmental samples. A linear relationship between Se+VI and pH (R2= 0.84, 0.58, 0.88, 0.82, and 0.91; significant at the 0.05 level) for groundwater, saturation extract, stream, spring, and lake waters were noted, suggesting that the Se+VI in the samples is highly associated with pH. Linear relationships were established between Se+VI and Mg, NO3, and SO4 for groundwater (R2= 0.24, 0.16, and 0.64; significant at the 0.01 level) and surface water (R2= 0.96, 0.14, and 0.91; significant at the 0.001 level). This suggests the high concentrations of Mg, NO3 and SO4, which strongly adsorb and compete with selenium for surface site, increases the Se+VI fraction. The results show that the higher percentage of selenate on other species in the analyzed samples is favored by higher pH and oxidizing environments of the valley. 相似文献
Linux malware can pose a significant threat—its (Linux) penetration is exponentially increasing—because little is known or
understood about Linux OS vulnerabilities. We believe that now is the right time to devise non-signature based zero-day (previously
unknown) malware detection strategies before Linux intruders take us by surprise. Therefore, in this paper, we first do a
forensic analysis of Linux executable and linkable format (ELF) files. Our forensic analysis provides insight into different
features that have the potential to discriminate malicious executables from benign ones. As a result, we can select a features’
set of 383 features that are extracted from an ELF headers. We quantify the classification potential of features using information
gain and then remove redundant features by employing preprocessing filters. Finally, we do an extensive evaluation among classical
rule-based machine learning classifiers—RIPPER, PART, C4.5 Rules, and decision tree J48—and bio-inspired classifiers—cAnt
Miner, UCS, XCS, and GAssist—to select the best classifier for our system. We have evaluated our approach on an available
collection of 709 Linux malware samples from vx heavens and offensive computing. Our experiments show that ELF-Miner provides more than 99% detection accuracy with less than 0.1% false alarm rate. 相似文献
The metal-induced crystallization (MIC) of hydrogenated sputtered amorphous silicon (a-Si:H) using aluminum has been investigated using X-ray diffraction (XRD) and scanning Auger microanalysis (SAM). Hydrogenated, as well as non-hydrogenated, amorphous silicon (a-Si) films were sputtered on glass substrates, then capped with a thin layer of Al. Following the depositions, the samples were annealed in the temperature range 200 °C to 400 °C for varying periods of time. Crystallization of the samples was confirmed by XRD. Non-hydrogenated films started to crystallize at 350 °C. On the other hand, crystallization of the samples with the highest hydrogen (H2) content initiated at 225 °C. Thus, the crystallization temperature is affected by the H2 content of the a-Si. Material structure following annealing was confirmed by SAM. In this paper, a comprehensive model for MIC of a-Si is developed based on these experimental results. 相似文献