Practical and scalable evolution of digital circuits

This paper addresses the scalability problem prevalent in the evolutionary design of digital circuits and shows that Evolvable Hardware (EHW) can indeed be considered as a viable alternative design methodology for large and complex circuits. Despite the effort by the EHW community to overcome the scalability problems using both direct mapped techniques and developmental approaches, so far only small circuits have been evolved. This paper shows that, by partitioning a digital circuit and making use of a modular developmental approach, namely, the Modular Developmental Cartesian Genetic Programming (MDCGP) technique, it is indeed possible to evolve large circuits. As a proof of concept, a 5 × 5 multiplier is evolved for partition sizes of 32 and 64. It is shown that compared to the direct evolution technique, the MDCGP technique provides five times reduction in terms of evolution times, 6–56% reduction in area and improved fault tolerance. The technique is readily scalable and can be applied to even larger partition sizes, and also to sequential circuits, thus providing a promising path to evolve large and complex circuits.     

Removal of Cr(VI) using co-immobilized activated carbon and <Emphasis Type="Italic">Bacillus subtilis</Emphasis>: fixed-bed column study

Fixed-bed column studies were conducted to evaluate the potential of co-immobilized (activated carbon and Bacillus subtilis) (CI) beads for the removal of Cr(VI) from aqueous solution. The impact of various parameters such as initial Cr(VI) concentrations (100, 150, and 200 mg/L), flow rate (3, 9, and 15 mL/min), and bed depth (10, 15, and 20 cm) on Cr(VI) adsorption onto CI beads were investigated. The breakthrough time increased with a decrease in initial Cr(VI) concentration and flow rate, and an increase in bed height. The breakthrough data obtained for Cr(VI) removal was more adequately described by the Thomas model with high correlation coefficients (R ² = 0.982). The eluent, 0.1 M NaOH, provided high elution efficiencies (~90 %) in all the six cycles. Obtained results pointed out that CI beads could potentially be used for the removal of Cr(VI) from aqueous solution.     

A novel SVM-based handwritten Tamil character recognition system

This paper describes a system for recognizing offline handwritten Tamil characters using support vector machine (SVM). Data samples are collected from different writers on A4 sized documents. They are scanned using a flat bed scanner at a resolution of 300 dpi and stored as gray-scale images. Various preprocessing operations are performed on the digitized image to enhance the quality of the image. Pixel densities are calculated for 64 different zones of the image and these values are used as the features of a character. These features are used to train the SVM. The SVM is tested for the first time to recognize handwritten Tamil characters. The system has achieved a very good recognition accuracy of 82.04% on the handwritten Tamil character database.     

Influence of microstructural inhomogeneities on the fracture toughness of modified 9Cr–1Mo steel at 298–823 K

Quasistatic fracture behaviour of two heats of modified 9Cr–1Mo steel for steam generator applications have been assessed at 298, 653 and 823 K. J–R curves were established and the elastic–plastic fracture toughness values at 0.2 mm crack extension (J_0.2) were determined. The fracture mechanisms were entirely different for the two steels at 298 K, with brittle fracture controlled by cleavage crack initiation in one and ductile fracture in the other by void nucleation and growth. At 653 and 823 K, fracture in both materials was by ductile crack growth. The difference in behaviour between the two steels at 298 K was attributed to the differences in microstructure, distribution and density of inclusions as well as phosphorous contents.     

Biosorption of chromium(VI) using Bacillus subtilis SS-1 isolated from soil samples of electroplating industry

Soils around the electroplating industry are often polluted with metals. The aim of the study was to assess Cr(VI) adsorption potential of chromium-resistant bacteria isolated from soil samples collected in and around electroplating industry, Coimbatore, India. A total of six morphologically different chromium-resistant bacteria were isolated from the soil samples and assayed for resistance to Cr(VI). Isolate designated SS-1 exhibited maximum resistance to Cr(VI) (600 mg/l) and subsequently identified as Bacillus subtilis based on the morphology, phenotypic characters, and partial 16S rDNA sequences. Batch experiments were carried out as a function of time, initial Cr(VI) concentration (100 mg/l), pH (2), and biosorbent dose (0.1 g/l). The maximum percentage of Cr(VI) removal was found to be 98.7 %. The experimental data showed a better fit with Langmuir model over Freundlich model throughout the range of initial concentrations. The kinetic models were examined with pseudo-first-order and pseudo-second-order kinetics. Fourier transform infrared spectroscopy studies confirmed the involvement of carboxyl and amide groups in Cr(VI) adsorption. Scanning electron microscopic studies revealed that nature of the bioadsorbent was altered after Cr(VI) adsorption. The results revealed that Cr(VI) was considerably adsorbed onto bacterial biomass, and it could be an economical method for the removal of Cr(VI) from aqueous solution.     

Investigation on effects of system parameters on transmission depth in underwater wireless optical communication

Photonic Network Communications - Performance of underwater wireless optical communication (UWOC) with different vertical water channel conditions is experimentally analyzed. Experiment has been...     

Car insurance and the risk of car crash injury

Despite speculation about the role of vehicle insurance in road traffic accidents, there is little research estimating the direction or extent of the risk relationship. Data from the Auckland Car Crash Injury Study (1998–1999) were used to examine the association between driving an uninsured motor vehicle and car crash injury. Cases were all cars involved in crashes in which at least one occupant was hospitalized or killed anywhere in the Auckland region. Controls were 588 drivers of randomly selected cars on Auckland roads. Participants completed a structured interview. Uninsured drivers had significantly greater odds of car crash injury compared to insured drivers after adjustment for age, sex, level of education, and driving exposure (odds ratio 4.77, 95% confidence interval 2.94–7.75). The causal mechanism for insurance and car crash injury is not easily determined. Although we examined the effects of multiple potential confounders in our analysis including socioeconomic status and risk-taking behaviours, both of which have been previously observed to be associated with both insurance status and car crash injury, residual confounding may partly explain this association. The estimated proportion of drivers who are uninsured is between 5 and 15% in developed countries, representing a significant public health problem worthy of further investigation.     

Accurate Characterization of Integrated Continuous-Time Filters

We present techniques for accurately characterizing the frequency response and noise spectral density of integrated continuous-time filters. A 75-MHz fifth-order Chebyshev Gm-C ladder filter designed in a 0.35-mum CMOS process and packaged in a 40-pin DIP is used as a test vehicle to validate the ideas proposed in this work. When compared to conventional frequency response measurement methods, the proposed techniques show a significantly enhanced measurement accuracy in the stopband, while being less sensitive to package characteristics.     

Power and Area-Efficient Adaptive Equalization at Microwave Frequencies

We present a low power analog adaptive equalization technique suitable for combating inter-symbol-interference at very high data rates. The proposed technique, which we term the lumped parameter equalizer, addresses several of the problems associated with conventional microwave equalizers based on the tapped delay line structure. The theory is given, and simulation results comparing it with the performance of ideal tapped delay line filters are shown. Circuit implementations are discussed, along with the effect of nonidealities on equalizer performance.      

Pulse Reverse Plating of Silver on Silver Alloy

Pulse deposition is a scalable and easy technique to obtain uniform coating without voids. In this work, the electrodeposited silver on silver alloy by pulse–reverse pulse and DC electrodeposition process. The quality of the film was analyzed by various characterization techniques. The structural property was studied by XRD, nitrogen adsorption studies and atomic force microscopy techniques. The electrical and chemical property of the film was analyzed by electrochemical techniques.