Power sector development in India with CO2 emission targets: Effects of regional grid integration and the role of clean technologies

The power sector in India at present comprises of five separate regional electricity grids having practically no integrated operation in between them. This study analyses the utility planning, environmental and economical effects of integrated power sector development at the national level in which the regional electric grids are developed and operated as one integrated system. It also examines the effects of selected CO₂ emission reduction targets in the power sector and the role of renewable power generation technologies in India. The study shows that the integrated development and operation of the power system at the national level would reduce the total cost including fuel cost by 4912 million $, total capacity addition by 2784 MW, while the emission of CO₂, SO₂ and NO_x would be reduced by 231.6 (1.9%), 0.8 (0.9%), 0.4 (1.2%) million tons, respectively, during the planning horizon. Furthermore, the study shows that the expected unserved energy, one of the indices of generation system reliability, would decrease to 26 GWh under integrated national power system from 5158 GWh. As different levels of CO₂ emission reduction targets were imposed, there is a switching of generation from conventional coal plants to gas fired plants, clean coal technologies and nuclear based plants. As a result the capacity expansion cost has increased. It was found that wind power plant is most attractive and economical in the Indian perspective among the renewable options considered (Solar, wind and biomass). Copyright © 2003 John Wiley & Sons, Ltd.     

Guest Editors' Introduction: Overview of Sensor Networks

Wireless sensor networks could advance many scientific pursuits while providing a vehicle for enhancing various forms of productivity, including manufacturing, agriculture, construction, and transportation.     

Vinyl acetate monomer—a pilot plant study

The kinetics of the reaction of acetic acid and acetylene over zinc acetate-activated carbon catalyst was investigated over a wide range of process variables in a pilot reactor. Although various catalytic reaction mechanisms were postulated, the rate of reaction was most satisfactorily correlated by a mechanism of surface reaction between charged adsorbed acetic acid and acetylene, which assumes that the rate controlling step was the irreversible charged adsorption of acetylene and acetic acid.     

Functional copolymer of geraniol and acrylonitrile: Synthesis and characterization

The radical copolymerization of acyclic terpene namely geraniol [GER] with acrylonitrile [AN] in DMF at (70 ± 0.1)°C for 1 h, using benzoylperoxide (BPO) as an initiator has been carried out under inert atmosphere of nitrogen. The kinetic expression for reaction is R_p ∝ [BPO]^0.5 [AN]^1.0 [GER]^1.0. The IR spectrum of the copolymer shows bands at 3432 and at 2244 cm^?1 due to ? OH group of GER and ? CN group of AN, respectively. The ¹³C‐NMR spectrum shows peaks at 73–75 δ ppm and 116–120 δ ppm due to ? OH group of GER and ? CN group of AN, respectively. The thermogravimetric analysis and differential scanning calorimetry study shows that copolymer is thermally stable up to 407°C and has glass transition temperatures (T_g) 56°C. The reactivity ratios r₁ (AN) and r₂ (GER) have been calculated as 0.05 and 0.005, respectively. The Alfrey‐Price Q‐e parameter for GER has been calculated as 0.094 and ?2.0, respectively. The molecular weights of the copolymers have been evaluated by gel‐permeation chromatography. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Adeno-associated virus 2-mediated high efficiency gene transfer into immature and mature subsets of hematopoietic progenitor cells in human umbilical cord blood

Recombinant adeno-associated virus 2 (AAV) virions were constructed containing a gene for resistance to neomycin (neoR), under the control of either the herpesvirus thymidine kinase (TK) gene promoter (vTK-Neo), or the human parvovirus B19 p6 promoter (vB19-Neo), as well as those containing an upstream erythroid cell-specific enhancer (HS-2) from the locus control region of the human beta-globin gene cluster (vHS2-TK-Neo; vHS2-B19-Neo). These recombinant virions were used to infect either low density or highly enriched populations of CD34+ cells isolated from human umbilical cord blood. In clonogenic assays initiated with cells infected with the different recombinant AAV-Neo virions, equivalent high frequency transduction of the neoR gene into slow-cycling multipotential, erythroid, and granulocyte/macrophage (GM) progenitor cells, including those with high proliferative potential, was obtained without prestimulation with growth factors, indicating that these immature and mature hematopoietic progenitor cells were susceptible to infection by the recombinant AAV virions. Successful transduction did not require and was not enhanced by prestimulation of these cell populations with cytokines. The functional activity of the transduced neo gene was evident by the development of resistance to the drug G418, a neomycin analogue. Individual high and low proliferative colony-forming unit (CFU)-GM, burst-forming unit-erythroid, and CFU-granulocyte erythroid macrophage megakaryocyte colonies from mock-infected, or the recombinant virus-infected cultures were subjected to polymerase chain reaction analysis using a neo-specific synthetic oligonucleotide primer pair. A 276-bp DNA fragment that hybridized with a neo-specific DNA probe on Southern blots was only detected in those colonies cloned from the recombinant virus-infected cells, indicating stable integration of the transduced neo gene. These studies suggest that parvovirus-based vectors may prove to be a useful alternative to the more commonly used retroviral vectors for high efficiency gene transfer into slow or noncycling primitive hematopoietic progenitor cells, without the need for growth factor stimulation, which could potentially lead to differentiation of these cells before transplantation.     

Integrating statistical and nonstatistical audit evidence using belief functions: A case of variable sampling

The main purpose of this article is to show how one can integrate statistical and nonstatistical items of evidence in the belief function framework. First, we use the properties of consonant belief functions to define the belief that the true mean of a variable lies in a given interval when a statistical test is performed for the variable. Second, we use the above definition to determine the sample size for a statistical test when a desired level of belief is needed from the sample. Third, we determine the level of belief that the true mean lies in a given interval when a statistical test yields certain values for the sample mean and the standard deviation of the mean for the variable. Finally, we use the auditing situation to illustrate the process of integrating statistical and nonstatistical items evidence. © 1994 John Wiley & Sons, Inc.     

Dielectric behaviour of hot pressed AlN ceramic exposed to inorganic acid vapours

Dielectric behaviour of hot pressed AIN ceramic is studied before and after exposing the samples to inorganic acid (HCl and HNO₃) vapours with a specific aim to study the effect of these vapours on the dielectric constant () and dissipation factor (tan ). Four samples having different volume percentage of porosity (0.2 to 15%) are selected for this study. Dielectric dispersion increases after exposing the samples to the above acid vapours. Tan also increases quite appreciably; the increase being more at higher porosity. Recovery studies show that the exposure effect is reversible. The exposure time dependence of and tan indicates that these parameters show a maxima at a particular exposure time. However, no such maxima is observed in the gravimetric measurements. The increase in dielectric parameters after exposure to acid vapours is explained in terms of the ionic conduction due to the dissociation of these vapours in the presence of moisture. The porosity dependence of this effect is discussed in terms of closed and open porosity reported by other workers.     

Use of AgInTe2 for optoelectronic switching at higher frequencies

A possible application of AgInTe₂ for optoelectronic switching is reported. Alternating and direct current (a.c. and d.c.) response of the material has been studied over a wide frequency range (5 Hz to 1 MHz) through measurements of conductance, capacitance and photocurrent at different temperature and illumination levels. The switching/recovery time has been analysed in terms of time constant and found to be of the order of microseconds for this material. Higher frequencies of operation (>40 kHz) are preferable because, at such frequencies, becomes almost independent of illumination level and temperature. Furthermore, the switching speed can be conveniently controlled with d.c. bias applied across the sample. Elliott's CBH model has been satisfactorily used to explain the switching behaviour for AgInTe₂.