Dynamic probe of ZnTe(110) surface by scanning tunneling microscopy

The reconstructed surface structure of the II–VI semiconductor ZnTe (110), which is a promising material in the research field of semiconductor spintronics, was studied by scanning tunneling microscopy/spectroscopy (STM/STS). First, the surface states formed by reconstruction by the charge transfer of dangling bond electrons from cationic Zn to anionic Te atoms, which are similar to those of IV and III–V semiconductors, were confirmed in real space. Secondly, oscillation in tunneling current between binary states, which is considered to reflect a conformational change in the topmost Zn–Te structure between the reconstructed and bulk-like ideal structures, was directly observed by STM. Third, using the technique of charge injection, a surface atomic structure was successfully fabricated, suggesting the possibility of atomic-scale manipulation of this widely applicable surface of ZnTe.     

Transient analysis of an advanced static var compensator using quad-series voltage-source PAM inverters

This paper deals with an advanced static Var compensator (ASVC) using quad-series voltage-source PAM inverters. The ASVC consists of four three-phase voltage-source inverters with a common dc capacitor and four three-phase transformers, each primary winding of which is connected in series with each other. Each inverter outputs a square-wave voltage, while the synthesized output voltage of the ASVC has a 24-step wave shape. This results not only in a great reduction of harmonic currents and dc voltage ripples but also in fewer switching and snubbing losses. In this paper, transient analysis is performed with the focus on the response of reactive power and the resonance between the dc capacitor and ac reactors. Experimental results obtained from a small-rated laboratory model of 10 kVA are also shown to verify analytical results based on the p-q transformation. The analytical results help in the design of system parameters such as the capacity of the dc capacitor and feedback gains.     

Sensorless control of synchronous reluctance motors using on‐line parameter identification method not affected by position estimation accuracy

This paper presents a novel on‐line parameter identification method for sensorless control of Synchronous Reluctance Motors (SynRMs). Although conventional sensorless control methods based on mathematical models usually need some complex measurements of motor parameters in advance, the proposed identification method does not require them and can be realized on‐line. The proposed method identifies motor parameters under sensorless control, so rotor position and velocity cannot be used to identify these parameters. However, the proposed method does not need rotor position and velocity, and identified parameters are not affected by these estimation errors. The sensorless control using identified motor parameters is realized, and the effectiveness of the proposed method is verified by experimental results. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(3): 62–69, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20258     

Combining natural language with direct manipulation: the conceptual framework for a hybrid human-computer interface

This paper describes the development of a conceptual model of an interaction system for future human-computer interaction. It is suggested that an integrated system is the most promising solution for diverse users and tasks. A ' hybrid interaction system' is considered, which tries to efficiently direct manipulation, menu selection, and natural language. The mechanism of the natural language interface module is described in more detail. Finally, the allocation of functionalities for generalized tasks on the conceptual model is considered from the taxonomic approach.     

Change in bacterial community during biodegradation of aniline

A modification of the standard electrodiagnostic test was developed in an effort to provide a more sensitive electrodiagnostic evaluation in radial tunnel syndrome. Radial motor nerve latency recordings were obtained in 3 different forearm positions: neutral, passive supination, and passive pronation. The maximal difference in these recordings, the differential latency, in 25 patients with radial tunnel syndrome of greater than 6 months duration (test group) was compared with those in 25 asymptomatic volunteers (control group). Differential latency recordings were obtained in all patients in the test group before and after surgery. Radial nerves that were compressed demonstrated a significantly greater differential latency (0.44+/-0.12 ms) versus controls (0.12+/-0.008 ms). Following radial nerve decompression, differential motor latencies in the test group decreased below control values, demonstrating a resolution of the provoked electrical response with a postoperative differential latency of 0.07+/-0.05 ms. Our results demonstrate the differential motor latency of the radial nerve to be a sensitive electrodiagnostic tool in patients with radial tunnel syndrome. A differential latency of > or =0.30 ms was considered indicative of radial tunnel syndrome.     

Purification and characterization of a novel ceramidase from Pseudomonas aeruginosa

We report here a novel type of ceramidase of Pseudomonas aeruginosa AN17 isolated from the skin of a patient with atopic dermatitis. The enzyme was purified 83,400-fold with an overall yield of 21.1% from a culture supernatant of strain AN17. After being stained with a silver staining solution, the purified enzyme showed a single protein band, and its molecular mass was estimated to be 70 kDa on SDS-polyacrylamide gel electrophoresis. The enzyme showed quite wide specificity for various ceramides, i.e. it hydrolyzed ceramides containing C12:0-C18:0 fatty acids and 7-nitrobenz-2-oxa-1, 3-diazole-labeled dodecanoic acid, and not only ceramide containing sphingosine (d18:1) or sphinganine (d18:0) but also phytosphingosine (t18:0) as the long-chain base. However, the enzyme did not hydrolyze galactosylceramide, sulfatide, GM1, or sphingomyelin, and thus was clearly distinguished from a Pseudomonas sphingolipid ceramide N-deacylase (Ito, M., Kurita, T., and Kita, K. (1995) J. Biol. Chem. 270, 24370-24374). This bacterial ceramidase had a pH optimum of 8.0-9.0, an apparent Km of 139 microM, and a Vmax of 5.3 micromol/min/mg using N-palmitoylsphingosine as the substrate. The enzyme appears to require Ca2+ for expression of the activity. Interestingly, the 70-kDa protein catalyzed a reversible reaction in which the N-acyl linkage of ceramide was either cleaved or synthesized. Our study demonstrated that ceramidase is widely distributed from bacteria to mammals.     

Crystallographic Texture Development in Bismuth Sodium Titanate Prepared by Reactive-Templated Grain Growth Method

Bi_0.5Na_0.5TiO₃ (BNT) and 0.94Bi_0.5Na_0.5TiO₃·0.06BaTiO₃ (BNT–BT) bulk ceramics with extensive 〈100〉 texture were prepared by the reactive-templated grain growth method, using platelike Bi₄Ti₃O₁₂ (BIT) particles as templates for BNT. Calcined compacts were composed of matrix grains with random orientation and 〈100〉-oriented grains transformed from aligned BIT particles, and the texture developed by the growth of oriented grains during sintering. Ceramics with extensive texture were obtained by using the starting mixture containing the maximum concentration of platelike BIT to form the maximum volume fraction of oriented grains.     

Performance of solvothermally prepared Ga2O3-Al2O3 catalysts for SCR of NO with methane

The solvothermal reaction of mixtures of aluminum isopropoxide (AIP) and gallium acetylacetonate (Ga(acac)₃) directly yielded the mixed oxides of γ-Ga₂O₃-Al₂O₃. In the solvothermal synthesis, the crystal structure of mixed oxides was controlled by the initial formation of γ-Ga₂O₃ nuclei. The mixed oxides prepared in diethylenetriamine have extremely high activities for selective catalytic reduction (SCR) of NO with methane as a reducing agent. With increasing crystallite size of the spinel structure, the catalytic activity increased. The ratio of the amount of methane consumed by combustion to total methane conversion was proportional to the density of acid sites on the surface of the mixed oxides. The mixed oxide catalysts prepared in diethylenetriamine had lower densities of acid sites and showed a higher methane-efficiency for CH₄-SCR than those prepared in other solvents. These catalysts maintained their high activity even when the reaction was carried out under the severe conditions (i.e., high space velocity and low NO concentration).     

Skeletonized hybrid liposomes

Summary Giant hybrid liposomes of polymerizable lipid and cholesterol were prepared by the hydration method and were polymerized by UV irradiation. The obtained giant liposomes were freeze-dried and washed with chloroform to skeletonize the frame structure of the polymerized membrane. The skeletonized liposomes were directly confirmed by scanning electron microscopy. The single-layered and fully spherical liposome frame were easily confirmed by the stereo-pair of the obtained micrographs.