Characterization of anisotropic gas permeability and thermomechanical properties of highly textured porous alumina

Porous alumina with a highly textured microstructure was fabricated by pulse electric current sintering (PECS) using alumina platelets. Highly oriented porous alumina with a porosity of 3%–50% was obtained by a pressure-controlled method of PECS. The properties of the highly textured porous alumina were measured in two directions. The nitrogen gas permeance and thermal conductivity at room temperature were higher in the direction along the platelet length due to the higher continuity of pores and the connectivity of alumina platelets, respectively. The anisotropy of the thermal conductivity at room temperature was investigated and explained by the effect of grain size of platelets as well as morphology and orientation of pores. The bending strength was higher with the loading direction along the platelet thickness. The thermal shock strength was clearly different in the two directions. The difference in the thermal shock strength was investigated by the measurement of properties and thermal stress analysis.     

Graphite formation on Ni film by chemical vapor deposition

Thin film formation of graphite by chemical vapor deposition using 2-methyl-1,2′-naphthyl ketone as a starting material was carried out on Ni film substrates. On Ni films directly deposited on quartz glass, the graphite films were obtained when the Ni film thickness was above 1 000 Å and above 5 000 Å at 700 °C and 1 000 °C, respectively. Depositions on thinner Ni film substrates comprise amorphous carbon (a-C) or graphite tubes which was owing to the thermal coagulation of the Ni film into droplets. On the other hand, graphite film was obtained on the Ni film with thickness 10 Å when a-C was inserted between the Ni film and the quartz glass. The coagulation of the Ni film is considered to be avoided by inserting a-C layer.     

Growth Morphology and Mechanism of a Hollow ZnO Polycrystal

When zinc oxide and graphite were placed into an alumina crucible, with a square hole (∼3 mm ×∼3 mm) near the top, and the crucible was covered by an alumina lid and heated at >1050°C, a hollow polycrystal composed of needlelike, ribbon(comb)-like, dendritic, and bulk zinc oxide crystals grew from the hole toward the outside of the crucible. The diameter and length of the polycrystal grown at 1050°C after 1 h were ∼2.2 mm and ∼20 cm, respectively. The diameter increased, while the length decreased, with increasing temperature. Most of the needlelike zinc oxide crystals in the hollow polycrystal were elongated along the c -axis.     

Fabrication and properties of novel composites in the system Al–Zr–C

Composite bodies in the system Al–Zr–C, with about 95% relative density, were obtained by heating the compact body of powder mixture consisting of Al and ZrC (5 : 1 mol %) in Ar at 1100–1500°C for various lengths of time. Components of the material heated at more than 1200°C were Al, Al3Zr, ZrC and AlZrC2. The Al3Zr exhibited plate-like aggregation, and its size increased with increasing temperature. In the material heated at 1500°C for 1 h, the largest plate-like Al3Zr aggregation was 2000 m long and 133 m thick. Then the AlZrC2 was present as well-proportioned hexagonal platelet particles with a 8–9 m diameter and a 1–2 m thickness in the interior of the plate-like Al3Zr aggregation and Al matrix phase. The average three-point bending strength of the bodies was 140–190 MPa, and the maximum strength was 203 MPa in the body heated at 1300°C for 1 h. The body heated at 1500°C for 1 h showed high oxidation resistivity to air up to 1000°C.     

On the cultural guises of cognitive dissonance: The case of Easterners and Westerners.

Cognitive dissonance and effects of self-affirmation on dissonance arousal were examined cross-culturally. In Studies 1 and 2, European Canadians justified their choices more when they made them for themselves, whereas Asian Canadians (Study 1) or Japanese (Study 2) justified their choices more when they made them for a friend. In Study 3, an interdependent self-affirmation reduced dissonance for Asian Canadians but not for European Canadians. In Study 4, when Asian Canadians made choices for a friend, an independent self-affirmation reduced dissonance for bicultural Asian Canadians but not for monocultural Asian Canadians. These studies demonstrate that both Easterners and Westerners can experience dissonance, but culture shapes the situations in which dissonance is aroused and reduced. Implications of these cultural differences for theories of cognitive dissonance and self-affirmation are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of gamma-ray irradiation on the TSC in polyethersulfone

When polyethersulfone was irradiated by γ rays and then poled at 37°C, a new TSC (thermally stimulated current) peak appeared at ~100°C. This new peak and other peaks near 40 and 150°C increase with an increase in dose of ~0.6 kGy, and this is considered to be due to trapped charges and other ionic carriers becoming mobile when rearrangement of scissioned chains occurs. However, if the dose exceeds 0.6 kGy, the peak magnitude decreases. Furthermore, if the TSC was poled at 120°C, only the peak near 150°C appeared and this peak monotonically decreased with an increase in the irradiation dose. A similar decreasing tendency was also observed in the conduction current and in the residual voltage. These decreasing features are considered to be caused by the radiation-induced change that rearrangement of scissioned chains decreases free volume for ionic transport     

Role of number of consecutive voltage zero-crossings in propagation of water trees in polyethylene

Effects of superposition of a low-frequency (0.1 to 50 Hz) voltage and a high-frequency 2 kHz voltage on the growth of water trees in polyethylene are examined. It has become clear that both the number of total voltage zero-crossings during the whole voltage application period and the number of consecutive voltage zero-crossings in the instant of the polarity reversal of the low-frequency voltage play important roles in the length and shape of water trees. Namely, the water tree length becomes longer as the number of total zero-crossings increases. Furthermore, among the voltages with the same number of total zero-crossings, the length becomes even longer with a prolonged shape in the direction of electric field as the number of consecutive zero-crossings increases. Effects of superposition of a high-frequency voltage onto a dc voltage are also examined. In this case, the dc voltage seems not to have any influence to the tree growth. By assuming the presence of space charge around the water-tree tip, the effective zero-crossings become only sensitive to the high-frequency component. Therefore, this result also indicates that the number of voltage reversals at the tree tip plays a crucial role in the growth of water trees.     

Surface degradation of polyamide nanocomposites caused by partial discharges using IEC (b) electrodes

Partial discharge (PD) degradation of polyamide both without nanoscale fillers (nanofillers) and with 2,4 and 5 wt% additions of nanofillers was investigated. Such materials were subjected to PDs using the IEC (b) electrodes for evaluation. Comparisons were made as to the surface roughness observed by scanning electron microscopy and atomic force microscopy. It was found that the change in the surface roughness is far smaller in specimens with nanofillers than those without nanofillers, and that the 2 wt% addition is sufficient for improvement of the surface roughness. Furthermore, it was elucidated that the difference of surface roughness of the degraded area due to PDs among the specimens originates from the difference in their crystalline structures. These results indicate that polyamide nanocomposite is more resistance to PDs than polyamide without nanofillers.