Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Morphological study by TEM on uniaxially oriented thin films of PET, PEN and their blends

Uniaxially oriented thin films of poly(ethylene terephthalate) (PET), poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) and their blends were prepared by applying shear strain to their respective melts, and the resulting morphologies were studied by transmission electron microscopy. Selected-area electron diffraction of each film revealed well-defined uniaxial orientation of polymer chains in the shearing direction. In the uniaxially oriented thin film of PEN, stacked-lamellar structure with the average long period of 27 nm consisting of a crystalline region about 15 nm thick and an amorphous one about 12 nm thick was found here and there in the dark-field image: PEN-type. On the other hand, stacked-lamellar structure was rarely observed in the case of PET: PET-type. In PET/PEN blends, the morphologies changed from the PET-type to the PEN-type with increasing content of PEN.     

具有硬核—软壳结构的丙烯酸聚合物乳液的研究

利用种子乳液聚合法合成了具有硬核—软壳结构的丙烯酸聚合物微粒子,通过对种子粒子数和最终粒子数的理论计算,并结合最低成膜温度(MFT)的测试结果,描述了聚合物微粒子的聚合过程,同时,还对聚合物乳液的各项性能进行了研究。     

Secondary Resistance Identification of an Induction-Motor Applied Model Reference Adaptive System and Its Characteristics

Induction-motor torque is not accurately controlled when the estimated secondary resistance of an induction-motor model in a vector controller differs from the true secondary resistance. An algorithm which identifies the secondary resistance on-line is developed. The motor operating condition for secondary resistance identification, the stable identifier organization, and the experimental investigation confirming the identification algorithm performance are presented. The algorithm is based on the theory of model reference adaptive systems (MRAS). The proposed algorithm stably identifies the secondary resistance under any load and any speed when a sinusoidal signal is injected into the flux axis primary current. The vector controller adopting this algorithm controls motor torque accurately under any load and any speed.     

Characterization of a mixed sphere and film waveguide at the 1-microm scale by 0.67-microm laser light propagation

A mixed sphere array and film (MSF) waveguide [a mixed system with a polystyrene microsphere array and a poly(methyl methacrytate) thin film waveguide] was fabricated and characterized at a wavelength of 0.67 microm. The attenuation coefficients of the isolated linear thin-film waveguide and the isolated linear microsphere array were measured to be 0.54 dB/microm and 0.98 dB/sphere, respectively. In the MSF waveguide the attenuation coefficients of the thin-film waveguide and the polystyrene microsphere array were 0.61 dB/microm and 1.17 dB/sphere, respectively. A curvilinear MSF waveguide was also fabricated and characterized. Evanescent wave interaction between the thin-film waveguide and the microsphere array was expected.     

Self-assembly of nano-sized arrays on highly oriented thin films of poly(tetrafluoroethylene)

Self-assembly of nano-sized arrays by casting a dilute solution of a guest material on the friction-transferred poly(tetrafluoroethylene) (FT-PTFE) substrate was newly discovered. Long axis of the rod-like structures forming the arrays is aligned perpendicular to the chain direction of FT-PTFE, and accordingly, the arrays are highly anisotropic. This phenomenon was observed for aqueous or organic solutions of polymers or organic materials. Each rod-like structure forming the arrays is composed of small grains. The arrays in question are formed regardless to the crystallinity of the guest materials. The formation mechanism of the nano-sized arrays is still unclear. However, we guess that they are formed as a result of microscopic flow pattern at the edge of the solution film. The arrays in question may be a new type of dissipative structure.     

Reaction of poly(epichlorohydrin) with sodium diethyldithiocarbamate and RI-UV dual-detector GPC of the product

Summary The chlorine in poly(epichlorohydrin) was found to be substituted by diethyldithiocarbamate (ETC) group by the reaction with NaETC in tetrahydrofuran at 60°C. The reaction product was analyzed by RI-UV dual-detector GPC. The composition i.e. the percentage of the chlorine replaced by the ETC group was found to be invariant with the elution count. This result might indicate the absence of polymer effect in the carbamation of poly(epichlorohydrin).     

Present status of the High Temperature Engineering Test Reactor (HTTR)

In Japan, the research and development on the High Temperature Gas-cooled Reactors (HTGRs) had been carried out for more than fifteen years since 1969 as the multi-purpose Very High Temperature gas-cooled Reactor (VHTR) program for direct utilization of nuclear process heat such as nuclear steel making. Recently, reflecting the change of the social and energy situation and with less incentives for industries to introduce such in the near future, the JAERI changed the program to a more basic ‘HTTR program’ to establish and upgrade the HTGR technology basis.The HTTR is a test reactor with a thermal output of 30 MW and reactor outlet coolant temperature of 950°C, employing a pin-in-block type fuel block, and has the capability to demonstrate nuclear process heat utilization using an intermediate heat exchanger. Since 1986 a detailed design has been made, in which major systems and components are determined in line with the HTTR concept, paying essential considerations into the design for achieving the reactor outlet coolant temperature of 950°C. The safety review of the Government started in February 1989. By request of the Science and Technology Agency the Reactor Safety Research Association reviewed the safety evaluation guideline, general design criteria, design code and design guide for the graphite and the high-temperature structure of the HTTR.The installation permit of the HTTR was issued by the Government in November 1990.     

Ultra Low-Dose Radiation: Stress Responses and Impacts Using Rice as a Grass Model

We report molecular changes in leaves of rice plants (Oryza sativa L. - reference crop plant and grass model) exposed to ultra low-dose ionizing radiation, first using contaminated soil from the exclusion zone around Chernobyl reactor site. Results revealed induction of stress-related marker genes (Northern blot) and secondary metabolites (LC-MS/MS) in irradiated leaf segments over appropriate control. Second, employing the same in vitro model system, we replicated results of the first experiment using in-house fabricated sources of ultra low-dose gamma (γ) rays and selected marker genes by RT-PCR. Results suggest the usefulness of the rice model in studying ultra low-dose radiation response/s.     

Structural development of natural rubber during uniaxial stretching by in situ wide angle X-ray diffraction using a synchrotron radiation

Structural development of natural rubber during uniaxial stretching was examined by an in situ wide angle X-ray diffraction measurement using a synchrotron. During stretching, the amorphous part showed little change, i.e. an amorphous halo remained clear even at 500% strain. The fraction of induced crystals was very small, though a clear crystalline pattern was observed at 400% strain. Some polymer chains were oriented and crystallized, but most of the chains were not oriented at all in spite of large deformations of the specimen. Only a small amount of polymer chains contributes to the stress and hysteresis loss during elongation.