Using solidification parameters to predict porosity distributions in alloy castings

Quality criteria used in the computer-aided design and analysis of casting processes typically relate geometric, thermal, or solidification parameters to structural features such as centerline shrinkage and microporosity. Quality criteria for the prediction of porosity in castings have been used successfully in steel, but the application of criteria functions to nonferrous alloys has been less successful. Recent work suggests that the dominating mechanism that determines the amount and distribution of porosity in castings is strongly dependent on the solidification mode of the alloy and the solidification conditions. Accordingly, casting processes and alloy types are divided into four groups, and a different set of criteria functions are obtained for each group.     

Liquid metal corrosion of 316L,Fe<Subscript>3</Subscript>Al,and FeCrSi in molten Zn-Al baths

Corrosion tests of 316L and two intermetallic compounds Fe₃Al and FeCrSi in industrial Galvanizing (Zn-0.18Al), GALFAN (Zn-5Al), GALVALUME (Zn-55Al), and Aluminizing (Al-8Si) baths and lab-scale static baths were conducted. In on-line tests in industrial hot-dip baths, 316L steel shows better corrosion resistance than Fe₃Al in Galvanizing, GALFAN, and GALVALUME baths. The corrosion resistance of 316L and Fe₃Al is similar in Aluminizing bath. In static tests, FeCrSi shows the best corrosion resistance in pure Zn, Zn-55Al, and Al-8Si baths. The corrosion resistance of 316L is better than that of Fe₃Al. In Zn-5Al bath, 316L shows no thickness loss after the test. For the same bath composition, the corrosion rates of the alloys in industrial baths are higher than those in static baths. Bath temperature and chemical composition play important roles in corrosion and intermetallic layer formation. Increasing bath temperature accelerates the corrosion process and changes the nature of intermetallic layers. A small amount of aluminum reduces the corrosion process by reducing the activity of Zn and forming inhibition layer. However, after aluminum content reaches the critical point, the dominant corrosion process changes from Zn-Fe reaction to Al-Fe reaction, and, consequently, the corrosion process accelerates by increasing aluminum content in the bath.     

Behaviour of materials under shock loading conditions

Shock wave research is a multidisciplinary field. In materials science, it is used to study equation-of-state, phase transitions and mechanical properties. In material processing, synthesis, powder compaction, shock sintering, shock welding etc. have been the prominent applications. We have been doing shock wave research at Trombay during the last two decades. Recently, we have built a single-stage gas gun to generate shock pressures in samples. In this paper, we describe this facility and some work done on the interpretation of shock-induced phase transitions.     

Post-thaw sperm motility, cAMP concentration and membrane lipid peroxidation after stimulation with pentoxifylline and platelet-activating factor

Earlier studies have demonstrated that pentoxifylline (PTX) and platelet-activating factor (PAF) can significantly improve the motion parameters of post-thaw human spermatozoa. This study has investigated the effects of PAF, PTX and their combination on cyclic adenosine monophosphate (cAMP) concentrations and membrane lipid peroxidation (LPO) in post-thaw human spermatozoa. Washed spermatozoa from normal volunteers (n = 10) were cryopreserved in Test-yolk buffer using a standard protocol. After 2 weeks the sperm samples were thawed, washed and incubated with either 1 microM PAF, 3 mM PTX or 0.5 microM PAF plus 1.5 mM PTX. Video sequences were recorded at 0, 30, 60, and 120 min for analysis of sperm motion parameters using the Cell Track Sperm Analysis System. Concentrations of cAMP were assessed by radioimmunoassay, and LPO levels were measured by malondialdehyde-thiobarbituric acid reactivity. Our studies indicate a time-course stimulatory effect with overall maximal stimulation observed in samples treated with the combination of PAF and PTX. The maximal stimulation of percentage motility compared to control was observed at 60 min in samples treated with PAF, PTX, or PAF plus PTX. PAF plus PTX stimulated straight-line velocity (VSL), curvilinear velocity (VCL) and lateral head displacement (ALH) after 30 min incubation. The primary effect of PAF was observed on VSL, while the main effect of PTX was on VCL. cAMP concentrations were 3-fold higher than controls in samples treated with PTX or PAF plus PTX. cAMP concentrations in PAF-treated samples did not differ significantly from controls. No significant differences were observed between any groups for LPO.(ABSTRACT TRUNCATED AT 250 WORDS)     

Bias caused by self-reporting distraction and its impact on crash estimates

Over the last decade, driver distractions, such as cell phone use and texting, have become a significant contributor to roadway crashes. Some states now have legislation that severely restricts or bans driver activities deemed distracting. However, many policies and engineered countermeasures are based on self-reported crash data. This raises the issue of potential bias and when not controlled for in analysis supporting policy decisions, can lead to poor allocation of public resources. This study explores the impact of self-reporting driver distraction on the likelihood estimates of the injury severity category of vehicle crashes. Using a two-step correction technique, the presence of bias is tested, when present corrected, and its impact is interpreted. The findings show that self-reporting bias is present in the national database, a database often used to help evaluate policy and engineering options, self-reporting bias understates the true effect of driver distraction on injury severity, and it is not uniform across injury categories. As a result, the forecast of potential savings of countermeasure policies or in-vehicle devices will be distorted leading to inefficient allocation of public resources.     

Damage in neutron-irradiated molybdenum: (I). Characterization of as-irradiated microstructure

The as-irradiated microstructure of molybdenum, irradiated in the EBR-II reactor at six different temperatures in the range 430–1000°C (0.24–0.44 $\text{T}{}_{\mathrm{m}}$) to a fast neutron fluence of ≈ 1 × 10²² n · cm^?2 ($\text{E > 1 MeV}$), has been characterized as black spot clusters, loops, rafts, voids (random and ordered) and dislocations. Present results show that both the void density, $\text{N}$_v and the void size, $\text{d}{}_{\mathrm{v}}$, are independent of irradiation temperature in the range 430–700° C. Above the 700° C irradiation temperature the void density decreases and the void size increases exponentially with increasing irradiation temperature and they have been expressed empirically as $\text{N}{}_{\mathrm{<mtext>v</mtext>}}\text{= 3.6 × 10}{}^{20}\text{exp}\text{(?26.9 T/T}{}_{\mathrm{<mtext>m</mtext>}}\text{)}$, $\text{d}{}_{\mathrm{<mtext>v</mtext>}}\text{= 1.5}\text{exp}\text{(9.44 T/T}{}_{\mathrm{<mtext>m</mtext>}}\text{)}$, where $\text{T/T}{}_{\mathrm{<mtext>m</mtext>}}$ is the irradiation temperature presented as a fraction of the melting point. The void density of all available published data has been used to show that the void density is (a) a strong function of irradiation temperature for a constant number of displacements per atom (dpa) and (b) a function of reactor power and spectrum when normalized to dpa.     

A Reversible Data Hiding Scheme for Interpolated Images Based on Pixel Intensity Range

Multimedia Tools and Applications - In this paper, we propose a novel interpolation and a new reversible data hiding scheme for upscaling the original image and hiding secret data into the...     

Haematological parameters and HbA2 levels in beta-thalassaemia trait with coincident iron deficiency

In the 1970s, Semm developed thermocoagulation, adapted the Roeder Loop, and further invented extra- and intracoporeal endoscopic knotting to achieve endoscopic hemostasis. His numerous technical inventions, especially the electronic insufflator, allowed more complex operations to be performed laparoscopically. His technique, however, was not quickly adopted by the surgical community. When the first fully laparoscopic appendectomy was carried out by Semm in 1980, a veritable storm broke loose. In the opinion of many prominent surgeons, Semm exaggerated the problem of adhesions, and laparoscopic technique itself was regarded as very dangerous. Misunderstood by medical scientists, Semm displayed an ability to force his ideas through despite skepticism and suspicion. He realized that endoscopic surgery had tremendous potential, and promoted laparoscopic technique not only in his field of gynecology but among general surgeons as well. In 1985, Muhe, of Boblingen, Germany, used Semm's technique to remove the first gallbladder in the world laparoscopically. Three years later when Semm presented a videotape of his laparoscopic appendectomy in Baltimore, he gave impetus to McKernan and Save of Marietta. Georgia, to carry out the first laparoscopic cholecystectomy in the United States.