Impact of high-intensity ultrasound on physical properties and degree of oxidation of lipase modified menhaden oil with caprylic acid and/or stearic acid

The purpose of this research was to determine the effect of high-intensity ultrasound (HIU) on physical properties, degree of oxidation, and oxidative stability of structured lipids (SLs). Caprylic acid (C) and stearic acid (S) were incorporated into menhaden oil using Lipozyme® 435 lipase to obtain five samples: (1) LC 20 (menhaden oil with 20% of C), (2) LC 30 (menhaden oil with 30% C), (3) LS 20 (menhaden oil with 20% S), (4) LS 30 (menhaden oil with 30% S), and (5) Blend C (menhaden oil with 16.24% C and 13.04% S). Samples were crystallized for 90 min at the following temperatures: (1) LC 20 at 15.5°C, (2) LC 30 at 17.5°C, (3) LS 20 at 24°C, (4) LS 30 at 30°C, and (5) Blend C at 18.0°C, and HIU was applied at the onset of crystallization. Physical properties, degree of oxidation, and oxidative stability were evaluated in sonicated and nonsonicated samples. All SLs had statistically higher G′ after sonication. Sonicated LS 30, LC 30, and Blend C had a higher melting enthalpy than the nonsonicated ones, while enthalpy values in sonicated LS 20 and LC 20 samples were not statistically different than the nonsonicated ones. No significant difference between sonicated and nonsonicated samples was observed in peroxide values (1.2 ± 0.1 meq/kg, p > 0.05) and in the oxidative stability index (6.3 ± 0.2 h, p > 0.05). These results showed that HIU was effective at changing physical properties without affecting the oxidation of the samples.     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A simple control technique for series resonant converters

A control strategy for series resonant converters, based on the control of the state space trajectory, is proposed. Its simple implementation allows high frequency applications and requires only resonant current sensing. Quite linear and load independent control characteristics are obtained. Simulated and experimental results show good steady-state stability, fast dynamic response for wide reference step variations, and well-controlled converter start-up     

Simple digital control improving dynamic performance of powerfactor preregulators

This paper presents the practical implementation of a fully digital control for boost power factor preregulators (PFPs). The control algorithm, which is simple and fast, provides a significant improvement in the system's dynamic performance compared to the usual analog control techniques. The paper discusses the design criteria and the actions taken for the implementation of the digital control, which is performed by means of a standard microcontroller (Siemens 80C166). The effectiveness of the approach is assessed by experimental tests     

Electrochemical anticorrosion performance evaluation of Al2O3 coatings deposited by MOCVD on an industrial brass substrate

Alumina (Al₂O₃) coatings of different thickness were deposited on OT59 brass substrate (BS) using the metal organic chemical vapour deposition (MOCVD) technique to evaluate the corrosion performance by EIS measurements. The used precursor was dimethyl-aluminium-isopropoxide. Electrochemical characterizations of the deposited films were performed in a standard very aggressive acidic solution (aerated 1N H₂SO₄ at 25 °C up to 168 h of immersion time) by means of direct current method (Tafel curves) and electrochemical impedance spectroscopy (EIS). The Rutherford backscattering spectroscopy (RBS) indicated that the films are very pure with the correct Al₂O₃ stoichiometry, while the IR absorption spectra showed that the films did not contain any OH groups. The surface film morphology was investigated by atomic force microscopy (AFM) and displayed a globular texture. The films were very smooth, with a maximum root mean square roughness, for example, of 14 nm for a 0.96 μm thick coating. The EIS data confirmed, as expected, that a 2.40 μm Al₂O₃ layer ensures the best corrosion protection after 168 h of immersion in the very acidic environment used.     

Binary and m-ary encoding in applications of tree-based genetic algorithms for QoS routing

Ubiquitous and Pervasive Computing (UPC) applications often have Quality of Service (QoS) requirements. These become constraints for the UPC network infrastructure. In this paper, we refer to Mobile ad Hoc Networks, one of the most important technologies supporting UPC, and investigate on Genetic Algorithms (GAs) for QoS routing. GAs are part of the soft computing paradigm and can solve the NP search of QoS routes with multiple constraints. We elaborate on tree-based GAs, which represent the set of paths from source to destination as a tree and encode them through the crossed junctions. While their most well-known applications use m-ary encoding representing single paths in the chromosomes, in this paper we discuss a binary encoding with the objective of improving the convergence speed. The binary encoding represents classes of paths in the chromosomes and allows local search on classes of paths. These classes are both collectively exhaustive and mutually exclusive. Simulation results compare convergence speed and scalability of GA applications with binary and m-ary encoding in networks with an increasing number of nodes and links per node. As the per-class processing is reason of additional computational cost, an hybrid GA application that uses both binary and m-ary encoding is introduced.     

A microfluidic optical beam steerer

This paper reports the fabrication and characterization of a prototype microfluidic device that can act as a periodic beam steerer. The prototype is formed by a simple T-junction followed by a serpentine channel that allows generation of a periodical segmented flow of air and water bubbles. If light hits the channel wall with a suitable angle, it can be either transmitted or reflected by the segmented flow, giving rise to an alternating beam steerer. The duty cycle, switching frequency, and overall stability and reproducibility of this prototype system are presented and discussed.     

<Emphasis Type="Italic">In situ</Emphasis> monitoring of solid fat content by means of pulsed nuclear magnetic resonance spectrometry and ultrasonics

An ultrasonic technique was developed to study the crystallization process of edible fats on-line. A chirp wave was used instead of the conventional pulser signal, thus achieving a higher signal-to-noise ratio. This enabled measurements to be made in concentrated systems [≈20% solid fat content (SFC)] through a 8.11-cm thick sample without significant signal loss. Fat samples were crystallized at 20, 25, and 30°C at a constant agitation rate of 400 rpm for 90 min. The crystallization process was followed by ultrasonic spectroscopy and a low-resolution pulsed nuclear magnetic resonance spectrometer. Specific relationships were found between ultrasonic parameters [integrated response, time of flight (TF), and full width half maximum] and SFC. TF, which is an indirect measurement of the ultrasonic velocity (v), was highly correlated to SFC (r ²>0.9) in a linear fashion (v=2.601 SFC+1433.0).     

QFD: The problem of comparing technical/engineering design requirements

An approach based on multiple-criteria decision aid (MCDA) methods has been introduced for the prioritization of technical/engineering design requirements during the quality function deployment (QFD) process. The proposed method allows the avoidance of the rigid procedure under which the relationship matrix coefficients are turned from an ordinal into a cardinal scale. A comparison analysis is carried out between the traditional approach and the proposed one. A numerical example is also provided so as to highlight the main differences between the two methods.     

Managing Workflow Authorization Constraints through Active Database Technology

The execution of workflow processes requires authorizations for enforcing the assignment of tasks to agents, either human or automated, according to the security policy of the organization. This paper presents a workflow authorization framework based on roles and organizational levels, and on authorization constraints. To facilitate the assignment of tasks to agents, roles and organizational levels are organized into hierarchies. Authorization constraints are introduced to specify instance-dependent, time-dependent, and history-dependent authorizations. Authorization constraints are specified in terms of active rules, used also for authorization management. The Workflow Management System determines authorized agents on the basis of the contents of an authorization base maintained through the active rules defined in the system.