Hydrophobic Cross-Linked Poly(dimethylsiloxane)-Based Sorbents for Oil Spill Applications

With the increase of industrialization and urbanization, humankind faces massive oil-based pollution due to tanker accidents, human error, and natural disasters. For this, hydrophobic sorbents are fabricated and their applications for the removal of oil from polluted water sources are investigated. These hydrophobic sorbents are prepared by the condensation reaction of poly(dimethylsiloxane) and tris[3-(trimethoxysilyl)propyl]isocyanurate cross-linker via bulk polymerization. The obtained sorbents exhibit high oil sorption capacity, fast absorption–desorption kinetics, and great reusability. Moreover, they can selectively absorb oil from the water surface, thus making them practical for water clean-up applications.     

Leaching of a copper flotation concentrate with ammonium persulfate in an autoclave system

The leaching behavior of a copper flotation concentrate was investigated using ammonium persulfate （APS） in an autoclave systee. The decomposition products of APS, active oxygen, and acidic medium were used to extract metals from the concentrate. Leaching experiments were performed to compare the availability of APS as an oxidizing agent for leaching of the concentrate under atmospheric conditions and in an autoclave system. Leaching temperature and APS concentration were found to be important parameters in both leaching systems. Atmospheric leaching studies showed that the metal extractions increased with the increase in APS concentration and temperature （up to 333 K）. A similar tendency was determined in the autoclave studies up to 423 K. It was also determined that the metal extractions decreased at temperatures above 423 K due to the passivation of the particle surface by molten elemental sulfur. The results showed that higher copper extractions could be achieved using an autoclave system.     

Supplier selection with an integrated methodology in unknown environment

This paper proposes an integrated methodology and its solution for supplier selection problem. A two-stage stochastic programming model and fuzzy TOPSIS methods are consolidated in this methodology. After pre-research phase, in the second part of the methodology, fuzzy TOPSIS is used for ranking potential suppliers considering qualitative data under fuzzy environment. In the third part of the methodology a group of ranked potential suppliers are included in a two-stage stochastic programming model for evaluation. In the two-stage stochastic programming model demand is assumed as uncertain and different scenarios are generated for this parameter. With this methodology, supplier evaluation procedure can be done in unknown environment. Our methodology is interested with a problem in multi-product, multi-period and multi-sourcing environment.     

Thermoelastic transition kinetics of a gamma irradiated CuZnAl shape memory alloy

Many types of shape memory alloys have been used in nuclear reactors and aerospace applications where they are exposed to high levels of various kinds of radiation. The effect of gamma irradiation on the transformation kinetics of thermoelastic transformations in a shape memory CuZnAl alloy was investigated by differential scanning calorimetry (DSC) with heating/cooling rates of 10, 20, 30 and 40 °C/min. Irradiation doses of 10, 20, 30 and 40 kGy were applied to the samples of the alloy. Changes in Gibbs free energies, entropies and elastic energies were calculated. Reverse transition temperatures A _s and A _f systematically decreased with increasing doses, although forward transition temperatures M _s and M _f underwent a minimum value at a dose of 20 kGy. Hysteresis in the transition temperatures changed as an inverse parabolic function of the irradiation dose. The activation energies of transformations were calculated by using Kissinger and Osawa methods.     

Mechanical properties and repair bond strength of polymer-based CAD/CAM restorative materials

Information on the mechanical properties and repairability of computer-aided design/computer-aided manufacturing (CAD/CAM) blocks is scarce. Five CAD/CAM blocks with similar indications were evaluated, including four resin nanoceramics, one polymer-infiltrated ceramic network (PICN), and one feldspathic ceramic. CAD/CAM blocks were sectioned into 4 mm × 1.2 mm × 13 mm bars for flexural strength (FS), and 4 mm thick blocks were prepared for elastic modulus (EM), nanohardness (NH), and microshear bond strength (µSBS) testing. FS of the CAD/CAM blocks was determined using a three-point bending test, whereas EM and NH values were measured using a nanoindenter. The reparability of the tested block materials was determined by the µSBS test. One-way ANOVA was conducted for FS, EM, NH, and µSBS followed by Tukey's pairwise comparison (α < 0.05). FS ranged from 115 to 207 MPa, EM from 8.21 to 44 GPa, NH from 0.76 to 7.24, and µSBS from 24.9 to 30.6 MPa. The findings of the present study revealed that resin nanoceramic blocks exhibited higher FS values than PICN and feldspathic ceramic, and they have acceptable mechanical properties for the fabrication of single-unit restorations according to the ISO 6872:2008. Furthermore, all CAD/CAM blocks tested can be successfully repaired regarding their recommended repair protocol.     

Foresight analysis of wind power in Turkey

The Turkish wind energy industry is one of the most competitive and fastest growing industries in the energy sector. Industrial energy demands, Kyoto agreement and carbon trade are shown as probable causes. Currently, Turkey has a total installed capacity of about 48.5 GW for electricity from all energy sources. High energy prices and unstable suppliers have stimulated Turkey's growing interest in wind business and wind power. This paper analyzes Turkey's wind energy future perspective and power generation strategy with a view to explaining Delphi approach to wind energy development. In this study, the two‐round Delphi survey was conducted by experts to determine and measure the expectations of the sector representatives through online surveys where a total of 70 experts responded from 24 different locations. The majority of the Delphi survey respondents were from 23 different universities (60%), electricity generation industries (21%), two different governmental organizations (11%), nongovernmental organizations (6%) and other institutions (2%). The article discusses not only the expert sights on wind energy technology but also all bibliometrical approaches. The results showed that Turkey's wind power installed capacity is expected to exceed 40 GW by the end of the 2020 s and in the middle of the 2030 s, and Turkey would be the European leading country in the field of electricity generation from the wind. Copyright © 2011 John Wiley & Sons, Ltd.     

Inactivation of Penicillum expansum in sour cherry juice, peach and apricot nectars by pulsed electric fields

Inhibitory effects of pulsed electric fields (PEF) on Penicillum expansum inoculated into sour cherry juice, apricot and peach nectars were determined based on germination tube elongation, spore germination rate, and light and scanning electron microscopy (SEM) observations in this study. After inoculation of juice/nectar samples with P. expansum spores at the level of 10(5)-10(6)cfu/mL, the samples were processed by bench scale PEF pulse generator as a function of differing electric field strengths (0, 13, 17, 20, 23, 27, 30 and 34kV/cm) and processing times (0, 62, 94, 123, 163, 198 and 218mus). Results revealed that with an increase in electric field strength and processing time, germination tube elongation and spore germination rate were completely inhibited. Light and SEM observations revealed considerable morphological alterations in fungal conidia such as cytoplasmic coagulation, vacuolations, shrinkage and protoplast leakage. PEF processing of juice/nectars was demonstrated to be effective in inactivating P. expansum. To our knowledge, this is the first study confirming the inhibitory effects of PEF on germination tube elongation and spore germination rate of P. expansum in fruit juice/nectars.