A novel contact opening mechanism has been developed using a piezoelectric actuator to open the contacts in a low contact opening velocity circuit breaker. The arc control on the contacts is critical for successful current interruption (10/sup 3/-10/sup 4/ A) in low voltage (<250V) devices. Previous work has shown how arc root commutation from the contact region into the arc chamber is affected by arc chamber materials, contact materials and the gap behind the moving contact for contact velocities between 1ms/sup -1/ and 10ms/sup -1/. This work is extended using a commercially available piezoelectric actuator to open the contacts. Contact opening speeds are assessed and the arc root mobility is characterized under this operating regime. A flexible test apparatus and solid-state high-speed arc imaging system are used to gather data on the arc root during the opening of the contacts. New experimental results are presented on the anode and cathode root velocity and arc root motion in an arc chamber with piezoelectrically actuated contact opening. These results can be used to improve the design of high current low voltage circuit breakers suitable for piezoelectric actuation. 相似文献
Objective: Guided by the extended parallel process model (EPPM), the objective was to assess control processes dominant in influenza behavior decisions. Design: Cross-sectional survey. Results: Response rate was 31% (n=968). Regarding influenza risk, 59% were in danger control. Those in fear control were more likely to report influenza infection (p=.000). In the nonvaccinated, those in fear control were more likely to indicate not knowing where to get the vaccine (p=.016) and that it was unavailable (p=.027), and those in danger control believed they did not need it (p=.023). Zero critical values were more likely to indicate that no health provider recommended the shot (p=.002). Conclusions: Most perceived efficacy to be stronger than threat related to influenza; according to the EPPM, they are aware of their risk but recognize their ability to avert it. For those in danger control, messages should focus on increasing perceptions of severity and susceptibility to positively affect behavior change. For those in fear control, messages should focus on efficacy only. With a critical value of zero, no threat is induced, and a high-threat/high-efficacy approach should be taken. (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献
After the break-up of Czechoslovakia in 1993 the primary metrological standards authority almost fully remained in Slovakia. So we had to build our primary vacuum metrology anew. But we could do it using uptodate techniques that are more effective and they enable us to fulfil our task more effectively and in a shorter time.The steady demand to widen the lower pressure range and a steady demand for maximal accuracy collide with the financial possibilities open to a small country. So it is impossible to follow the classical pattern for the vacuum standards: liquid columns, static expansion system and dynamic expansion system. But it is possible to utilize contemporary progress in construction of piston manometers. This enables us to discard liquid column and static expansion techniques in favour of piston technique [Tesar J, Prazak D. Vacuum 2002; 67: 311, Tesar J, Prazak D, Krajicek Z. In:Proceedings of international symposium on Pressure and Vacuum, 2003. p. 169, Tesar J, Repa P, Prazak D, Krajicek Z, Peksa L. Vacuum 2004; 76: 491.]. Such system fulfils all the needs of a little industrial country and is economically acceptable. 相似文献
Nitrofurantoin is a commonly used urinary tract antibiotic that has been found at high concentrations in human milk. In vivo studies in rats were carried out to determine the mechanism by which this drug crosses the mammary epithelium. Lactating rats were gavage-fed with nitrofurantoin, and their milk and plasma levels of the antibiotic were measured at intervals up to 8 hr. The average milk-to-plasma (M/P) ratio, calculated from the areas under the milk and plasma curves, respectively, was 23 compared with a ratio predicted to be about 0.3 on the basis of lipid partitioning and protein binding determinations. M/P ratios for two nitrofurantoin congeners were also calculated. The neutral compound furazolidone had a M/P ratio of about 1, as predicted, whereas the basic compound furaltadone had a M/P ratio of 3.49 compared with a predicted ratio of 1.4. These data suggest that nitrofurantoin and, to a lesser extent, furaltadone are actively transported across the mammary epithelium into milk. 相似文献
Wet etch rates at 25°C for Zn0.9Mg0.1O grown on sapphire substrates by pulsed laser deposition (PLD) were in the range 300–1100 nm · min−1 with HCl/H2O (5×10−3−2×10−2 M) and 120–300 nm · min−1 with H3PO4/H2O (5×10−3−2×10−2 M). Both of these dilute mixtures exhibited diffusion-limited etching, with thermal activation energies of 2–3 kCal · mol−1. By sharp contrast, the etch rates for ZnO also grown on sapphire by PLD were much slower in similar solutions, with rates
of 1.2–50 nm · min−1 in HCl/H2O (0.01–1.2 M) and 12–54 nm · min−1 in H3PO4/H2O (0.02–0.15 M). The etching was reaction limited over the temperature range 25–75°C, with activation energies close to 6
kCal · mol−1. The resulting selectivity of Zn0.9Mg0.1O over ZnO can be a high as ∼400 with HCl and ∼30 with H3PO4. 相似文献
A promising catalytic system for the low temperature oxidation of methane to a methanol derivative has been investigated under both batch and semi-continuous operation in two different reactor types. The system comprises of a bimetallic palladium and copper(II) chloride catalyst contained in a trifluoroacetic acid (TFA) and an aqueous phase. Methane, oxygen and a co-reductant carbon monoxide constitute the gas phase. Typical operating conditions were a temperature of 85 °C and a pressure of 83 bar.
The yields of the methyl trifluoroacetate product observed in this present work were less than those obtained in other batch autoclave works, which employed only 4 ml of liquid phase, compared with 50 ml in this study. Furthermore, an encouraging initial product formation rate of ca. 40 mol/m3 h, quickly decreased after the first hour, and came to an apparent end after only 2 h. This observation had not been reported previously.
Work performed in a semi-continuous porous tube reactor (300 ml of re-circulating liquid phase) also showed the same reaction characteristics as in the batch reactor. Thus, the deteriorating product formation rate cannot be attributed to gaseous reactant depletion (batch operation). The results suggest problems associated with catalyst instabilities, e.g. with the previously elucidated Wacker chemistry. 相似文献