Evaluation of Digitally Encoded Layer‐by‐layer Coated Microparticles as Cell Carriers

To obtain more biologically relevant data there is a growing interest in the use of living cells for assaying the biological activity of unknown chemical compounds. Density ‘multiplex’ cell‐based assays, where different cell types are mixed in one well and simultaneously investigated upon exposure to a certain compound are beginning to emerge. To be able to identify the cells they should be attached to microscopic carriers that are encoded. This paper investigates how digitally encoded microparticles can be loaded with cells while keeping the digital code in the microcarriers readable. It turns out that coating the surface of the encoded microcarriers with polyelectrolytes using the layer‐by‐layer (LbL) approach provides the microcarriers with a ‘highly functional’ surface. The polyelectrolyte layer allows the growth of the cells, allows the orientation of the cell loaded microcarriers in a magnetic field, and does not hamper the reading of the code. It has further been shown that the cells growing on the polyelectrolyte layer can become transduced by adenoviral particles hosted by the polyelectrolyte layer. It is concluded that the digitally encoded microparticles are promising materials for use in biomedical and pharmaceutical in‐vitro research where cells are used as tools.     

提高FPGA-PWM计数器性能的位交换

当你需要一些模拟输出,并且系统中有一片FPGA时,你可能选择采用一个PWM模块和一个简单的低通滤波器,如图1所示.FPGA的输出通常是一种固定频率、可变占空比的波形,由一个计数器和一个数字比较器生成(表1).     

Defect Passivation in Perovskite Solar Cells by Cyano‐Based π‐Conjugated Molecules for Improved Performance and Stability

Defects at the surface and grain boundaries of metal–halide perovskite films lead to performance losses of perovskite solar cells (PSCs). Here, organic cyano‐based π‐conjugated molecules composed of indacenodithieno[3,2‐b]thiophene (IDTT) are reported and it is found that their cyano group can effectively passivate such defects. To achieve a homogeneous distribution, these molecules are dissolved in the antisolvent, used to initiate the perovskite crystallization. It is found that these molecules are self‐anchored at the grain boundaries due to their strong binding to undercoordinated Pb²⁺. On a device level, this passivation scheme enhances the charge separation and transport at the grain boundaries due to the well‐matched energetic levels between the passivant and the perovskite. Consequently, these benefits contribute directly to the achievement of power conversion efficiencies as high as 21.2%, as well as the improved environmental and thermal stability of the PSCs. The surface treatment provides a new strategy to simultaneously passivate defects and enhance charge extraction/transport at the device interface by manipulating the anchoring groups of the molecules.     

Identification of the impedance model of an implanted cochlear prosthesis from intracochlear potential measurements

Those suffering from a severe to profound sensorineural hearing loss can obtain substantial benefit from a cochlear implant prosthesis. An electrode array implanted in the inner ear stimulates auditory nerve fibers by direct injection of electrical current. A major limitation of today's technology is the imprecise control of intracochlear current flow, particularly the relatively wide spread of neural excitation. A better understanding of the intracochlear electrical fields is, therefore, required. This paper analyzes the structure of intracochlear potential measurements in relation to both the subject's anatomy and to the properties of the electrode array. An electrically equivalent network is proposed, composed of small lumped circuits for the interface impedance and for the cochlear tissues. The numerical methods required to estimate the model parameters from high-quality electrical potential recordings are developed. Finally, some models are presented for subjects wearing a Clarion CII device with a HiFocus electrode and discussed in terms of model reliability.     

Flexible Nanosomes (SECosomes) Enable Efficient siRNA Delivery in Cultured Primary Skin Cells and in the Viable Epidermis of Ex Vivo Human Skin

The extent to which nanoscale‐engineered systems cross intact human skin and can exert pharmacological effects in viable epidermis is controversial. This research seeks to develop a new lipid‐based nanosome that enables the effective delivery of siRNA into human skin. The major finding is that an ultraflexible siRNA‐containing nanosome—prepared using DOTAP, cholesterol, sodium cholate, and 30% ethanol—penetrates into the epidermis of freshly excised intact human skin and is able to enter into the keratinocytes. The nanosomes, called surfactant‐ethanol‐cholesterol‐osomes (SECosomes), show excellent size, surface charge, morphology, deformability, transfection efficiency, stability, and skin penetration capacity after complexation with siRNA. Importantly, these nanosomes have ideal characteristics for siRNA encapsulation, in that the siRNA is stable for at least 4 weeks, they enable highly efficient transfection of in vitro cultured cells, and are shown to transport siRNA delivery through intact human skin where changes in the keratinocyte cell state are demonstrated. It is concluded that increasing flexibility in nanosomes greatly enhances their ability to cross the intact human epidermal membrane and to unload their payload into targeted epidermal cells.     

Zr‐Doped Indium Oxide (IZRO) Transparent Electrodes for Perovskite‐Based Tandem Solar Cells

Parasitic absorption in transparent electrodes is one of the main roadblocks to enabling power conversion efficiencies (PCEs) for perovskite‐based tandem solar cells beyond 30%. To reduce such losses and maximize light coupling, the broadband transparency of such electrodes should be improved, especially at the front of the device. Here, the excellent properties of Zr‐doped indium oxide (IZRO) transparent electrodes for such applications, with improved near‐infrared (NIR) response, compared to conventional tin‐doped indium oxide (ITO) electrodes, are shown. Optimized IZRO films feature a very high electron mobility (up to ≈77 cm² V^?1 s^?1), enabling highly infrared transparent films with a very low sheet resistance (≈18 Ω □^?1 for annealed 100 nm films). For devices, this translates in a parasitic absorption of only ≈5% for IZRO within the solar spectrum (250–2500 nm range), to be compared with ≈10% for commercial ITO. Fundamentally, it is found that the high conductivity of annealed IZRO films is directly linked to promoted crystallinity of the indium oxide (In₂O₃) films due to Zr‐doping. Overall, on a four‐terminal perovskite/silicon tandem device level, an absolute 3.5 mA cm^?2 short‐circuit current improvement in silicon bottom cells is obtained by replacing commercial ITO electrodes with IZRO, resulting in improving the PCE from 23.3% to 26.2%.     

Rate-distortion driven decoder-side bitplane mode decision for distributed video coding

Distributed video coding (DVC) features simple encoders but complex decoders, which lies in contrast to conventional video compression solutions such as H.264/AVC. This shift in complexity is realized by performing motion estimation at the decoder side instead of at the encoder, which brings a number of problems that need to be dealt with. One of these problems is that, while employing different coding modes yields significant coding gains in classical video compression systems, it is still difficult to fully exploit this in DVC without increasing the complexity at the encoder side. Therefore, in this paper, instead of using an encoder-side approach, techniques for decoder-side mode decision are proposed. A rate-distortion model is derived that takes into account the position of the side information in the quantization bin. This model is then used to perform mode decision at the coefficient level and bitplane level. Average rate gains of 13–28% over the state-of-the-art DISCOVER codec are reported, for a GOP of size four, for several test sequences.     

Carbon mineralization from composts and food industry wastes added to soil

We have studied the short term C mineralization of six wastes from important food industries, one sludge from a biogas plant and three composts. All the wastes were characterized chemically and fractionated according to the Van Soest method. The fresh wastes were incubated under controlled environment conditions to determine the C mineralization rate. Based on first order mineralization kinetics, we calculated the hypothetical amount of stable C in the wastes as the amount of C that would not be mineralized within one year under field conditions. The percentage of stable organic C in the organic matter was in general much larger in the composts than in the other wastes, but when expressed on dry matter, the non-composted wastes had comparable or larger amounts of stable organic C than the composts and have a considerable potential for supplying organic matter to soils, and hence for C sequestration. The amount of stable organic C could best be predicted by the total N content of the wastes (R _a ² = 0.855), whereas the results of the fractionation had very little predictive power, probably due to problems related to the high ash content of some of the wastes. An index that combined stable organic C and N and P content in the wastes was calculated to assess possible limitations for applying these wastes in agriculture. Under current nutrient legislation in Western Europe, a number of these wastes will only be usable in small amounts, but these and other food industry wastes could still prove to be valuable soil amendments in nutrient poor situations, for increasing soil organic C content and supplying nutrients.     

Dietary Intake and Food Sources of Total and Individual Polyunsaturated Fatty Acids in the Belgian Population Over 15 Years Old

Advances in our knowledge of the physiological functions of dietary polyunsaturated fatty acids (PUFAs) have led to an increased interest in food sources and the level of dietary intake of these nutrients. Up to now, no representative data was available for the Belgian adult population. This study aimed to describe data on the intake and food sources of total and individual omega-6 and omega-3 PUFA for the Belgian population over 15 years old. PUFA intakes were assessed for 3,043 Belgian adults, based on two non-consecutive 24 h recalls. Usual intakes were calculated using the multiple source method. The results showed that the intake of linoleic acid (LA) is in accordance with the recommendation for almost all Belgian adults. However, the intake of omega-3 PUFA is suboptimal for a large part of the studied population and also the intake of total PUFA should be increased for a part of the population. The main food source of LA and α-linolenic acid (ALA) was the group of fats and oils (60.6 % for LA and 53.1 % for ALA). Fish and fish products were the most important sources of long chain omega-3 PUFA. Age influenced fatty acids intake, with higher intake of omega-3 PUFA in the older age groups. To fill the gap between the intake and recommendation of total PUFA, and in particular omega-3 PUFA, sustainable strategies and efficient consumer communication strategies will be needed.