Sol-Gel Preparation and Luminescence Properties of BaMgAl10O17∶Eu2+ Phosphors

The synthesis of BaMgAl10O17∶ Eu2 (BAM) phosphors using the sol-gel method and their luminescence properties were reported. The blue-light emitting BAM was synthesized using citric acid and ethylene glycol as chelating materials. Emission of blue-light was obtained from these phosphors. The luminescent intensity increases as the temperature of heat treatment is increased. This study investigated the effects of the molar ratio of ethylene glycol to citric acid (Φ value), with respect to the phase formation and luminescence properties of BAM. The variation of the Φ value resulted in the change of the sol-gel reaction mechanism and the microstructures of the resultant powders. An increase in Φ value leads to an increase in the rate of BAM phase formation. The photoluminescent intensity of the prepared phosphors increases with heating temperatures because of enhanced crystallization.     

Acoustic study of nano-crystal embedded PbO-P2O5 glass

Nano-crystal embedded PbO-P₂O₅ glass has been prepared and characterized by XRD and TEM measurements. The ultrasonic velocity and attenuation measured within the temperature range 80–300 K show significant structure and interesting feature with the presence of nano-crystalline region. The glass samples were prepared by melt-quench method and nano-crystals of different sizes were produced by heat treatment of the glasses for different durations of heating. All the processes were carried out at or above glass transition temperature. A theoretical model that takes account of the effects of thermally activated relaxation, anharmonicity as well as microscopic elastic inhomogeneities arising out of fluctuations has been successfully applied to interpret the variation of ultrasonic velocity and attenuation data. An interesting outcome of this application has been to propose a method for the determination of the size of nano-crystals from the ultrasonic attenuation data.     

The role of pressure on thin amorphous carbon films deposited using microwave surface wave plasma CVD

We report the effects of gas composition pressure (GCP) on the optical, structural and electrical properties of thin amorphous carbon (a-C) films grown on p-type silicon and quartz substrates by microwave surface wave plasma chemical vapor deposition (MW SWP CVD). The films, deposited at various GCPs ranging from 50 to 110 Pa, were studied by UV/VIS/NIR spectroscopy, atomic force microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and current–voltage characteristics. The optical band gap of the a-C film was tailored to a relatively high range, 2.3–2.6 eV by manipulating GCPs from 50 to 110 Pa. Also, spin density strongly depended on the band gap of the a-C films. Raman spectra showed qualitative structured changes due to sp³/sp² carbon bonding network. The surfaces of the films are found to be very smooth and uniform (RMS roughness < 0.5 nm). The photovoltaic measurements under light illumination (AM 1.5, 100 mW/cm²) show that short-circuit current density, open-circuit voltage, fill factor and photo-conversion efficiency of the film deposited at 50 Pa were 6.4 μA/cm², 126 mV, 0.164 and 1.4 × 10^− 4% respectively.     

Influence of untreated and novel electron‐beam‐modified surface‐coated silica filler on the thermorheological properties of ethylene–octene copolymer

We developed surface‐modified silica fillers by coating these with an acrylate monomer, trimethylolpropane triacrylate, or a silane coupling agent, triethoxyvinyl silane, followed by electron‐beam irradiation at room temperature. These were incorporated in an ethylene–octene copolymer rubber. Thermorheological studies of the unvulcanized ethylene–octene copolymer and its untreated and modified silica‐filled composites were done with a shear dynamic oscillating rheometer. Modification of the silica filler, especially via the silanization process followed by electron beam treatment, significantly reduced filler–filler networking as revealed from the log–log plots of storage modulus and complex shear viscosity, and its real component. The rheological complexity of the compositions was analyzed from a double logarithmic plot of the storage modulus and loss modulus. The results obtained from the master curves constructed on the basis of the time–temperature superposition principle and the activation energy calculated from the Arrhenius equation for the flow of above these compounds further supported these findings. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2453–2459, 2003     

Initial Deposition of Colloidal Particles on a Rough Nanofiltration Membrane

The initial rate of colloid deposition onto semi‐permeable membranes is largely controlled by the coupled influence of permeation drag and particle‐membrane colloidal interactions. Recent studies show that the particle‐membrane interactions are subject to immense local variations due to the inherent morphological heterogeneity (roughness) of reverse osmosis (RO) and nanofiltration (NF) membranes. This experimental investigation reports the effect of membrane roughness on the initial deposition of polystyrene latex particles on a rough NF membrane during cross flow membrane filtration under different operating pressures and solution chemistries. Atomic force microscopy was used to characterize the roughness of the membrane and observe the structure of particle deposits. At the initial stages of fouling, the AFM images show that more particles preferentially accumulate near the “peaks” than in the “valleys” of the rough NF membrane surface.     

Exploiting SSDs in operational multiversion databases

Multiversion databases store both current and historical data. Rows are typically annotated with timestamps representing the period when the row is/was valid. We develop novel techniques to reduce index maintenance in multiversion databases, so that indexes can be used effectively for analytical queries over current data without being a heavy burden on transaction throughput. To achieve this end, we re-design persistent index data structures in the storage hierarchy to employ an extra level of indirection. The indirection level is stored on solid-state disks that can support very fast random I/Os, so that traversing the extra level of indirection incurs a relatively small overhead. The extra level of indirection dramatically reduces the number of magnetic disk I/Os that are needed for index updates and localizes maintenance to indexes on updated attributes. Additionally, we batch insertions within the indirection layer in order to reduce physical disk I/Os for indexing new records. In this work, we further exploit SSDs by introducing novel DeltaBlock techniques for storing the recent changes to data on SSDs. Using our DeltaBlock, we propose an efficient method to periodically flush the recently changed data from SSDs to HDDs such that, on the one hand, we keep track of every change (or delta) for every record, and, on the other hand, we avoid redundantly storing the unchanged portion of updated records. By reducing the index maintenance overhead on transactions, we enable operational data stores to create more indexes to support queries. We have developed a prototype of our indirection proposal by extending the widely used generalized search tree open-source project, which is also employed in PostgreSQL. Our working implementation demonstrates that we can significantly reduce index maintenance and/or query processing cost by a factor of 3. For the insertion of new records, our novel batching technique can save up to 90 % of the insertion time. For updates, our prototype demonstrates that we can significantly reduce the database size by up to 80 % even with a modest space allocated for DeltaBlocks on SSDs.     

Collaborative jamming and collaborative defense in cognitive radio networks

In cognitive radio networks, cognitive nodes operate on a common pool of spectrum where they opportunistically access and use parts of the spectrum not being used by others. Though cooperation among nodes is desirable for efficient network operations and performance, there might be some malicious nodes whose objective could be to hinder communications and disrupt network operations. The absence of a central authority or any policy enforcement mechanism makes these kinds of open-access network more vulnerable and susceptible to attacks.In this paper, we analyze a common form of denial-of-service attack, i.e., collaborative jamming. We consider a network in which a group of jammers tries to jam the channels being used by legitimate users who in turn try to evade the jammed channels. First, we compute the distribution of the jamming signal that a node experiences by considering a random deployment of jammers. Then, we propose different jamming and defending schemes that are employed by the jammers and legitimate users, respectively. In particular, we model and analyze the channel availability when the legitimate users randomly choose available channels and the jammers jam different channels randomly. We propose a multi-tier proxy-based cooperative defense strategy to exploit the temporal and spatial diversity for the legitimate secondary users in an infrastructure-based centralized cognitive radio network. Illustrative results on spectrum availability rates show how to improve resiliency in cognitive radio networks in the presence of jammers.