Structure and electrical characteristics of Ce4+-doped Ba2In2O5

The In-site of Ba₂In₂O₅ with Brownmillerite structure was partially substituted for Ce⁴⁺ ions in order to examine the doping effect on the order-disorder transition. Ba₂In_{2 – x} Ce _x O_{5 + x/2} (x = 0.1, 0.2, 0.3, 0.5, 1.0, and 1.5) were prepared by solid state reaction. X-Ray diffraction analyses of these powder samples demonstrated that Ba₂In_{2 – x} Ce _x O_{5 + x/2} (x = 0.1 and 0.2) possesses Brownmillerite structure. With increasing content of Ce⁴⁺ ion the crystal system of Ba₂In_{2 – x} Ce _x O_{5 + x/2} (x = 0.3, 0.5, and 1.0) changed to cubic perovskite structure above the order-disorder transition temperature of Ba₂In₂O₅. Arrhenius plots of the electrical conductivities of Ba₂In_{2 – x} Ce _x O_{5 + x/2} (x = 0.2, 0.3, and 1.0) exhibited no discontinuity. These compounds had high transference numbers of oxide ion above 973 k.     

Fibrous support for immobilization of enzymes

A poly(vinyl alcohol) (PVA) fiber support incorporating various aminoacetal functional groups has been developed for immobilizing enzymes. The aminated PVA fiber seems to adsorb enzymes with electrostatic force of attraction; thus the immobilization procedure is simple. By the use of this fiber having immobilized enzymes, the reaction between enzymes and substrates is nearly independent of the size of subtstrates. This newly developed type of fiber, which is formed by a mass superfine fibers (SFF), each measuring 1 μm or less in diameter, permits much more increased surface area than the conventional enzyme immobilization supports. Our studies of the properties of the fiber for immobilization of enzymes show the following results: (1) SFF has a greater ability for the immobilization of invertase than ordinary fibers; (2) dimethyl-aminated SFF has the best performance for the immobilization of invertase. From these results, it is concluded that the dimethyl-aminated SFF is an excellent support for the immobilization of invertase.     

Analysis of PD-generated SF/sub 6/ decomposition gases adsorbed on carbon nanotubes

Chemical byproducts analysis has been recognized as a powerful diagnosis method for SF₆ gas-insulated switchgear (GIS). The authors have previously demonstrated that a carbon nanotube (CNT) gas sensor could detect partial discharge (PD) generated in SF₆ gas. However, PD-generated decomposition gas species, which were responsible for the CNT gas sensor response, have not been identified yet. In this paper, two kinds of experiments were conducted in order to identify the responsible decomposition gas species. At first, the decomposition gas molecules adsorbed on CNTs were analyzed by Fourier transformation infrared (FTIR) spectroscopy. FTIR absorbance was observed around 735 cm^-1 after CNTs were exposed to PD generated in SF₆. In the second experiment, the CNT gas sensor responses to typical SF₆ decomposition products (HF and SF₄) were examined. The CNT gas sensor responded to these gases in the same way as to PD generated in SF₆. SF₄ response was larger than HF response. Based on these results, SF ₄ and SOF₂ emerged as candidates for the responsible decomposition gases. Electrochemical interactions between adsorbed gas molecules and CNT were discussed based on theoretical predictions of molecular orbital calculations. The calculation results suggested that both of SOF₂ and SF₄ could increase the CNT gas sensor conductance     

Software system of the Earth Simulator

The Earth Simulator (ES) is a large scale, distributed memory, parallel computer system consisting of 640 processor nodes (PN) with shared memory vector multi-processors (64GFLOPS/PN, 5120 APs in total, AP: arithmetic processor). All the nodes are connected via a high speed (16GB/s) single-stage crossbar network called the Interconnection Network (IN).

The operating system for the Earth Simulator is based on SUPER-UX, the UNIX operating system for the SX series scientific supercomputers. In order to realize high-performance parallel processing on the highly parallel machine, the operating system is enhanced for scalability.

The Earth Simulator system is managed as a two-level cluster system called the Super Cluster System. In the Super Cluster System, the Earth Simulator system is divided into 40 clusters (16 PNs/cluster). A single controller called Super Cluster Control Station (SCCS) manages all these clusters. This management system provides Single System Image (SSI) operation, management and job control for the large scale multi-node system.

The Job Scheduler (JS) and NQS running on the SCCS control all jobs of the system. They schedule the resources such as processing nodes and files which have not usually been treated as scheduling resources. This allows efficient scheduling of large scale jobs.

The MPI library (MPI/ES) and the HPF compiler (HPF/ES) are available for distributed parallel programming on the Earth Simulator. MPI/ES conforms to the MPI 2.0 standard and is optimized to exploit the hardware features. HPF/ES conforms to the core part of HPF 2.0 and supports some features of the HPF 2.0 approved extensions and HPF/JA 1.0 extensions. HPF/ES suitably handles the 3-level parallelism of the Earth Simulator system, that is, vectorization, shared-memory parallelization, and distributed-memory parallelization. Moreover, HPF/ES extends the language to easily handle irregular problems.     

Determination method of equivalent insulation test voltage at room temperature for high temperature superconducting power apparatus with coil structure

This paper deals with the determination method of the equivalent insulation test voltage at room temperature that secures the reliability of the cryogenic electrical insulation of the high temperature superconducting (HTS) power apparatus. The high voltage test is related to the apparatus with coil structure at the stages of its development, manufacturing and shipment. In the test method, the equivalent insulation test voltage at room temperature is derived from the standard test voltage at cryogenic temperature, based on the idea that the HTS power apparatus should be operated without partial discharges (PDs). The conversion factor between the two voltages is given by the product of the two medium factors, i.e. the one relating to the potential distribution along the coil winding and the other relating to the PD inception condition at the weakest part in the electrical insulation system. In order to determine the latter factor concerned with the non-linear phenomena against electrical stresses, the PD inception voltages at cryogenic and room temperatures are theoretically and experimentally estimated for modeled turn-to-turn insulation system. The results show that both estimated and measured values are in fairly good agreement and the proposed method is useful for the equivalent high voltage test at room temperature for the HTS power apparatus.     

Pulsed electrical breakdown in liquid helium in the μs range

Information about breakdown time-lags under pulsed voltage stress is prerequisite to the insulation design of superconducting devices. Experiments have been carried out using a pulse generator which provides a step voltage with 200 ns rise time and a long decay time constant of more than 1 ms. The present experiments may bridge the information gap between time lag measurements in the ns range using extremely high field strengths, and existing data found with usual lightning impulse voltage. The test device is described in the paper, and some typical results are discussed in detail     

Composite materials reinforced with polyoxymethylene whiskers

Various composite samples reinforced with polyoxymethylene (POM) whisker crystals were prepared and their Young's moduli were measured and analysed, on a theoretical equation, to estimate the modulus of the filler itself. Good reinforcement was obtained with matrix resins such as an epoxide and an unsaturated polyester, the results giving the modulus of the whisker to be approximately 1×10¹¹ N m^–2, i.e., almost equivalent to the ideal crystal modulus of POM. Some acoustic properties were investigated for sheet composite materials prepared with a polyolefin polymer for matrix. The sonic velocity attained was more than twice that of the matrix polymer, at larger filler contents, while the internal dynamic loss was maintained at a reasonably high level. Loudspeakers carrying diaphragms of the composite sheets showed improved frequency characteristics in the high-frequency region. Some morphological observations were made for the crystals embedded in resins.     

Class of binary sequences with zero correlation zone

Based on the idea of the zero correlation zone (ZCZ), a class of binary sequences with the defined ZCZ property is presented. The ZCZ spreading code sequences can be used in spread spectrum systems and CDMA systems to eliminate multipath and cochannel interference     

Photoluminescence of Rare-Earth-Doped Ca-α-SiAlON Phosphors: Composition and Concentration Dependence

Rare-earth-doped Ca-α-SiAlON phosphors, with the compositions of (Ca_{1−3/2 x} RE _x ) _{m /2}Si_{12− m − n} Al _m+n O _n N_{16− n} (RE=Ce, Sm, and Dy, 0.5≤ m =2 n ≤3.0), were prepared by sintering at 1700°C for 2 h under 10 atm N₂. The concentration of rare earths varied from 3 to 30 at.% with respect to Ca. The photoluminescence (PL) properties were investigated as functions of the composition of the host matrix (i.e., m ) and the concentration of rare earths (i.e., x ). The results show that the emission properties can be optimized by tailoring m and x . The Ce³⁺ luminescence originating from the 4 f –5 d interconfigurational transitions is greatly affected by the environment surrounding the Ce³⁺ ions, which differs from the Sm³⁺ or Dy³⁺ luminescence arising from the 4 f –4 f intraconfigurational transitions. X-ray diffraction and scanning electron microscopy were used to explain the composition and concentration dependence of PL properties.     

A new class of zero-correlation zone sequences

In this correspondence, two new methods for constructing sets of zero-correlation zone (ZCZ) sequences are proposed. These methods are based on perfect sequences and unitary matrices. Compared with previous methods, the proposed methods can generate sets of nonbinary ZCZ sequences having a longer zero-correlation zone. The sequences obtained by these methods are suitable for approximately synchronized code-division multiple-access (AS-CDMA) systems.