Optimal power control for Rayleigh-faded multiuser systems with outage constraints

How can we achieve the conflicting goals of reduced transmission power and increased capacity in a wireless network, without attempting to follow the instantaneous state of a fading channel? In this paper, we address this problem by jointly considering power control and multiuser detection (MUD) with outage-probability constraints in a Rayleigh fast-fading environment. The resulting power-control algorithms (PCAs) utilize the statistics of the channel and operate on a much slower timescale than traditional schemes. We propose an optimal iterative solution that is conceptually simple and finds the minimum sum power of all users while meeting their outage targets. Using a derived bound on outage probability, we introduce a mapping from outage to average signal-to-interference ratio (SIR) constraints. This allows us to propose a suboptimal iterative scheme that is a variation of an existing solution to a joint power control and MUD problem involving SIR constraints. We further use a recent result that transforms complex SIR expressions into a compact and decoupled form, to develop a noniterative and computationally inexpensive PCA for large systems of users. Simulation results are presented showing the closeness of the optimal and mapped schemes, speed of convergence, and performance comparisons.     

An integrated modeling approach to predict flooding on urban basin.

Correct prediction of flood extents in urban catchments has become a challenging issue. The traditional urban drainage models that consider only the sewerage-network are able to simulate the drainage system correctly until there is no overflow from the network inlet or manhole. When such overflows exist due to insufficient drainage capacity of downstream pipes or channels, it becomes difficult to reproduce the actual flood extents using these traditional one-phase simulation techniques. On the other hand, the traditional 2D models that simulate the surface flooding resulting from rainfall and/or levee break do not consider the sewerage network. As a result, the correct flooding situation is rarely addressed from those available traditional 1D and 2D models. This paper presents an integrated model that simultaneously simulates the sewerage network, river network and 2D mesh network to get correct flood extents. The model has been successfully applied into the Tenpaku basin (Nagoya, Japan), which experienced severe flooding with a maximum flood depth more than 1.5 m on September 11, 2000 when heavy rainfall, 580 mm in 28 hrs (return period > 100 yr), occurred over the catchments. Close agreements between the simulated flood depths and observed data ensure that the present integrated modeling approach is able to reproduce the urban flooding situation accurately, which rarely can be obtained through the traditional 1D and 2D modeling approaches.     

Split and collectorless flotation to medium coking coal fines for multi-product zero waste concept

The medium coking coal fines of − 0.5 mm from Jharia coal field were taken for this investigation. The release analysis of the composite coal reveals that yield is very low at 10.0% ash, about 25% at 14% ash and 50% at 17% ash level. The low yield is caused by the presence of high ash finer fraction. The size-wise ash analysis of − 0.5 mm coal indicated that − 0.5 + 0.15 mm fraction contains less ash than − 0.15 mm fraction. Thus, the composite feed was split into − 0.5 + 0.15 mm and − 0.15 mm fractions and subjected to flotation separately. The low ash bearing fraction (− 0.5 + 0.15 mm) was subjected to two stages collectorless flotation to achieve the concentrate with 10% ash. The cleaner concentrate (18.9%) with 10% ash was recovered which has an application in metallurgical industries. The concentrate of 30.2% yield with 12.5% ash could be achieved in one stage collectorless flotation which is suitable for use in coke making as sweetener. As the − 0.15 mm fraction contains relatively high ash, collector aided flotation using sodium silicate was performed to get a concentrate of 23.6% yield with about 17% ash. The blending of this product with cleaner tail obtained from − 0.5 + 0.15 mm produces about 35.0% yield with 17% ash and that can be utilized for coke making. The reject from the two fractions can be used for conventional thermal power plant or cement industries using a 23.5% ash after one stage collector aided flotation and the final tailings produced content ash of 61.6% can be used for fluidization combustion bed (FBC). This eventually leads to complete utilization of coal.     

Thin-film ferroelectrics of PZT of sol-gel processing

The ferroelectric effect has been demonstrated for sol-gel derived lead zirconate titanate (PZT) (53/47) thin films. The respective values of coercive field and remanent polarization were 4x10(6) V/m and 0.36 C/m(2). The thin-film fabrication process is simple and compatible with Si planar technology, and offers a wide variety of potential uses for counting, memory, and integrated optical circuit applications.     

Silicon Nitride Derived from an Organometallic Polymeric Precursor: Preparation and Characterization

Partially crystalline Si₃N₄, with nanosized crystals and a specific surface area greater than 200 m²/g, is obtained by pyrolysis of a commercially available vinylic polysilane in a stream of anhydrous NH₃ to 1000°C. This polymer does not contain N initially. Crystallization to high-purity α-Si₃N₄ proceeds with additional heating above 1400°C under N₂. The changes in crystallinity, powder morphology, infrared spectra, and elemental compositions, for samples annealed from 1000° to 1600°C under N₂, are consistent with an amorphous-to-crystalline transformation. Although macroscopic consolidation and local densification occur at 1400°C, volatilization and accompanying weight loss limit bulk densification. The effect of temperature on specific surface area is examined and related to the sintering process. These results are applicable to pyrolysis, decomposition, and crystallization studies of ceramics synthesized by polymeric precursor routes.     

Cement mortar impregnated with poly(methyl methacrylate-co-styrene)

Polymer-impregnated mortars were prepared by copolymerization of a monomer mixture of methyl methacrylate and styrene in the ratios of 13:87 and 40:60 using Co-60 gamma radiation. The copolymerization characteristics viz. the rate of polymerization, the extent of monomer loss, polymer loading, etc., were studied. The nature and molecular weight of the extractable polymer from the composite were determined. The flexural strength of the copolymer-impregnated composites was found to be better than that of the composites impregnated with component homopolymers.     

New block copolymers II. Synthesis and characterization of an ABA-type block copolymer

A new regular ABA-type triblock copolymer has been synthesized by polycondensation of the acid chloride of carboxy-terminated butadience-acrylonitrile rubber (CTBN) with hydroxyterminated polyethylene isophthalate (PEI) oligomer. This block copolymer was characterized by elemental (nitrogen) analysis, vapor pressure osmometry, viscometry, and IR and NMR spectroscopy. Quantitative estimation of block segments has been carried out by measuring the area under peaks assigned to various protons in the NMR spectrum of the polymer. NMR spectral analysis has been found to agree well with the nitrogen analysis of the polymer. The solubility and solution viscosity behavior of the polymer has also been studied.     

Electrohydrodynamic‐Induced SERS Immunoassay for Extensive Multiplexed Biomarker Sensing

Cancer diagnosis and patient monitoring require sensitive and simultaneous measurement of multiple cancer biomarkers considering that single biomarker analysis present inadequate information on the underlying biological transformations. Thus, development of sensitive and selective assays for multiple biomarker detection might improve clinical diagnosis and expedite the treatment process. Herein, a microfluidic platform for the rapid, sensitive, and parallel detection of multiple cancer‐specific protein biomarkers from complex biological samples is presented. This approach utilizes alternating current electrohydrodynamic‐induced surface shear forces that provide exquisite control over fluid flow thereby enhancing target–sensor interactions and minimizing non‐specific binding. Further, the use of surface‐enhanced Raman scattering‐based spectral encoding with individual barcodes for different targets enables specific and simultaneous detection of captured protein biomarkers. Using this approach, the specific and sensitive detection of clinically relevant biomarkers including human epidermal growth factor receptor 2 (HER2); Mucin 1, cell surface associated (MUC1); epidermal growth factor receptor; and Mucin 16, cell surface associated (MUC16) at concentrations as low as 10 fg mL^?1 in patient serum is demonstrated. Successful target detection from patient samples further demonstrates the potential of this current approach for the clinical diagnosis, which envisages a clinical translation for a rapid and sensitive appraisal of clinical samples in cancer diagnostics.     

Removal of Cr(VI) using co-immobilized activated carbon and <Emphasis Type="Italic">Bacillus subtilis</Emphasis>: fixed-bed column study

Fixed-bed column studies were conducted to evaluate the potential of co-immobilized (activated carbon and Bacillus subtilis) (CI) beads for the removal of Cr(VI) from aqueous solution. The impact of various parameters such as initial Cr(VI) concentrations (100, 150, and 200 mg/L), flow rate (3, 9, and 15 mL/min), and bed depth (10, 15, and 20 cm) on Cr(VI) adsorption onto CI beads were investigated. The breakthrough time increased with a decrease in initial Cr(VI) concentration and flow rate, and an increase in bed height. The breakthrough data obtained for Cr(VI) removal was more adequately described by the Thomas model with high correlation coefficients (R ² = 0.982). The eluent, 0.1 M NaOH, provided high elution efficiencies (~90 %) in all the six cycles. Obtained results pointed out that CI beads could potentially be used for the removal of Cr(VI) from aqueous solution.