Design methodologies for high-performance noise-tolerant XOR-XNOR circuits

Scaling down to deep submicrometer (DSM) technology has made noise a metric of equal importance as compared to power, speed, and area. Smaller feature size, lower supply voltage, and higher frequency are some of the characteristics for DSM circuits that make them more vulnerable to noise. New designs and circuit techniques are required in order to achieve robustness in presence of noise. Novel methodologies for designing energy-efficient noise-tolerant exclusive-OR-exclusive- NOR circuits that can operate at low-supply voltages with good signal integrity and driving capability are proposed. The circuits designed, after applying the proposed methodologies, are characterized and compared with previously published circuits for reliability, speed and energy efficiency. To test the driving capability of the proposed circuits, they are embedded in an existing 5-2 compressor design. The average noise threshold energy (ANTE) is used for quantifying the noise immunity of the proposed circuits. Simulation results show that, compared with the best available circuit in literature, the proposed circuits exhibit better noise-immunity, lower power-delay product (PDP) and good driving capability. All of the proposed circuits prove to be faster and successfully work at all ranges of supply voltage starting from 3.3 V down to 0.6 V. The savings in the PDP range from 94% to 21% for the given supply voltage range respectively and the average improvement in the ANTE is 2.67X.     

Preparation of an anion‐exchange adsorbent by the radiation‐induced grafting of vinylbenzyltrimethylammonium chloride onto cotton cellulose and its application for protein adsorption

Poly(vinylbenzyltrimethylammonium chloride)‐graft‐cotton cellulose, an anion‐exchange matrix, was synthesized by a mutual radiation‐induced grafting technique with a ⁶⁰Co γ‐radiation source. The grafted matrix was characterized by grafting yield estimation, elemental analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The grafting yield decreased with the increase in the dose rate. However, the grafting yield and nitrogen content of grafted samples increased almost linearly with an increase in the total irradiation dose. To evaluate the performance of the grafted anion‐exchange matrix, the protein adsorption and elution behavior were investigated in a continuous column process under various experimental conditions, with bovine serum albumin used as a model protein. The binding and elution behavior of the anion‐exchange matrix depended on different experimental parameters, such as the grafting yield, ionic strength, pH of the medium, and amount of protein loaded. From a breakthrough curve, the equilibrium binding capacity and elution percentage of the grafted anion‐exchange matrix were estimated to be 40 mg/g and 94%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5512–5521, 2006     

Influence of thermomechanical ageing on tensile properties of 2014 aluminium alloy

2014 aluminium alloy was subjected to various thermomechanical ageing (TMA) treatments which included partial peak ageing (25% and 50%), warm rolling (10% and 20%) and further ageing to peak hardness level at 160 ° C. The tensile tests reveal that TMA treatments cause a substantial improvement in tensile properties and thermal stability. The electron microscopic studies reveal that the TMA treatments affect substantially the ageing characteristics. The TMA Ib treatment yields the finest needles having longitudinal dimensions of 40nm. The TMA treatments also lead to precipitate-dislocation networks of different densities. It is observed that TMA IIb treatment results in the densest precipitate-dislocation tangles of all the TMA treatments. As a result, a significant improvement in the tensile properties of 2014 aluminium alloy has been observed.     

Truck driver scheduling in Canada

This paper presents and studies the Canadian Truck Driver Scheduling Problem (CAN-TDSP), which is the problem of determining whether a sequence of locations can be visited within given time windows in such a way that driving and working activities of truck drivers comply with Canadian Commercial Vehicle Drivers Hours of Service Regulations. Canadian regulations comprise the provisions found in US hours of service regulations as well as additional constraints on the maximum amount of driving and the minimum amount of off-duty time on each day. We present two heuristics and an exact approach for solving the CAN-TDSP. Computational experiments demonstrate the effectiveness of our approaches and indicate that Canadian regulations are significantly more permissive than US hours of service regulations.     

Regional Climate Simulations on EU-INDIA Grid Infrastructures: Methodologies and Performance

In this paper, we present a possible approach to use different Grid infrastructures across Europe and India for regional climate simulations and discuss in details the advantages and limitations in using them. The application taken into consideration is the Regional Climate Model RegCM4, which has been recently re-written for making it more efficient and easier to be fully exploited on any kind of computational infrastructure. We describe here the methods applied to port this package on the Grid infrastructures made available by the EU-IndiaGrid project. We also discuss different approaches, the way to run the model on both European and Indian infrastructures and our promising approach to deal with data management issues. Use of RegCM on Grid infrastructure has further been compared with that on HPC resources. The domain worked upon for these tests is the South-Asia CORDEX domain, which is of great importance for the Indian Summer Monsoon. Our final conclusion is that, for certain class of experiments, RegCM4 model can be efficiently and easily integrated on Grid infrastructures, by means of the procedures described in this paper.     

Structural drivers controlling sulfur solubility in alkali aluminoborosilicate glasses

If the direct feed approach to vitrify the Hanford's tank waste is implemented, the low activity waste (LAW) will comprise higher concentrations of alkali/alkaline-earth sulfates than expected under the previously proposed vitrification scheme. To ensure a minimal impact of higher sulfate concentrations on the downstream operations and overall cost of vitrification, advanced glass formulations with enhanced sulfate loadings (solubility) are needed. While, the current sulfate solubility predictive models have been successful in designing LAW glasses with sulfate loadings <2 wt.%, it will be difficult for them to design glass compositions with enhanced loadings due to our limited understanding of the fundamental science governing these processes. In this pursuit, this article unearths the underlying compositional and structural drivers controlling the sulfate solubility in model LAW glasses. It has been shown that the preferentially removes non-framework cations from the modifier sites in the silicate network, thus, leading to the polymerization in the glass network via the formation of ring-structured borosilicate units. Furthermore, though the sulfate solubility slightly decreases with increasing Li⁺/Na⁺ in the glasses, the prefers to be charge compensated by Na⁺, as it is easier for to break Na–O bonds instead of Li–O bonds.