Involvement of specific mechanism in plasmid DNA uptake by mouse peritoneal macrophages

Lamina-associated polypeptide (LAP)2, which directly interacts with B-type lamins and chromosomes, is an integral membrane protein specifically distributed along the inner nuclear membrane of the nuclear envelope. Multiple regions of its large nucleoplasmic domain promote this localization, including the first (residues 1-296) and the second (residues 298-409) halves of the LAP2 N terminus. The second half is involved in LAP2 association with the nuclear lamina [Furukawa, K., Panté, N., Aebi, U. & Gerace, L. (1995) EMBO J. 14, 1626-1636]. In this study to further define its role, we examined which domain of B-type lamin interacts with LAP2 by means of a binding assay with bacterially expressed proteins and a yeast two-hybrid system. We found that amino acids in the region of residues 78-258 of the lamin B1 rod domain directly bound with LAP2. The data suggest that LAP2 may modulate the assembly of nuclear lamins.     

Cost-Efficient Traffic Aggregation Employing Cross-Layer Shared Protection

Shared protection/restoration is a promising solution for reducing protection resources and is supported at each layer of the current multi-layer networks. Software-defined networking is expected to reduce equipment cost as well as operational cost by orchestrating these shared protection functionalities. However, although protection resource sharing improves link utilization, it sometimes increases the required equipment. Meanwhile, traffic re-aggregation at each layer is an important technique for low volume traffic to utilize the underlying link capacity more efficiently, but re-aggregation also makes it difficult to share protection resources with traffic at lower layers. In this paper, we present multi-layer network design strategy and method that reduce equipment cost by means of both traffic re-aggregation at each layer and protection resource sharing among multiple service traffic at different layers. The strategy first prioritizes traffic re-aggregation at each layer, and then maximally delegates shared protection to lower layers as long as it does not increase the required capacity at the lower layer. Evaluation results from the example three-layer networks confirm that the proposed method can effectively reduce equipment cost compared to the conventional design method. Cost reduction is achieved by leveraging shared protection functions at multiple layers.     

Construction of human monoclonal single-chain Fv antibodies against small-cell lung cancer by phage display libraries derived from cell-immunized SCID mice engrafted with human peripheral blood lymphocytes

In this study, we describe a phage display strategy to obtain human monoclonal single-chain Fv (scFv) antibodies binding target cancer cell surface proteins. By developing a cancer cell immunization protocol for SCID mice engrafted with human peripheral blood lymphocytes in combination with an antibody phage display method, we have isolated phage antibodies binding small-cell lung cancer cell line H889 by subtractive selection. One of the isolated scFv antibodies, 12EAb, recognized the E2 component of pyruvate dehydrogenase complex (PDC-E2) by immunoprecipitation according to MALDI-TOF MS analysis. Furthermore, we have confirmed the plasma membrane localization of PDC-E2 in small-cell lung cancer cells by immunocytochemistry and cell surface protein biotinylation, although PDC-E2 is usually located in the mitochondrial matrix. These results, including unique localization of identified antigens, were obtained by proteomic approaches. The present methods can be applied to generate human monoclonal scFv antibodies against tumor cells and to identify new molecular targets for immunotherapy and markers for diagnosis.     

Small crack behavior and fracture of nickel-based superalloy under ultrasonic fatigue

Fracture and small crack behavior in the very high cycle domain of 10⁹ cycles were investigated with a nickel-based superalloy under ultrasonic fatigue in ambient air at room temperature. The influence of ultrasonic frequency is examined by comparing the results with those in conventional low frequency fatigue. It is found that fatigue strength increases as frequency is raised up to 19.5 kHz and the most of fatigue life is consumed in nucleating and propagating small cracks up to 100 μm. Transition of fracture mode from transgranular ductile fracture to cleavage-dominated fracture occurs beyond a critical stress intensity factor range of approximately , leading to the catastrophic failure under ultrasonic fatigue.     

Synthesis and characterization of propylene‐α‐olefin random copolymers with isotactic propylene sequence. II. Propylene–hexene‐1 random copolymers

A series of novel hexene‐1–propylene random copolymers with isotactic sequence of propylene was synthesized with a MgCl₂‐supported Cr(acac)₃ catalyst. The molecular weight distribution of copolymers and homopolymers was considerably narrower than that of typical polyolefins produced by heterogeneous Ziegler–Natta catalysts. The crystallizability of the copolymers having a propylene‐unit content of more than 50 mol % drastically decreased with decreasing propylene‐unit content, and the copolymers with a propylene content of less than 50 mol % were completely amorphous. In the present novel type of random copolymers with crystallizable and noncrystallizable units, a single glass transition was observed between pure polypropylene and polyhexene‐1, and a major component was found to govern the final morphology and the mechanical characteristics. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2949–2954, 2004     

Syntheses of group 4 transition metal complexes bearing 2-pyridinethiolate ligands and their catalytic activities for ethylene polymerization

Titanium bis(2-pyridinethiolate) complexes, Ti(6-R-SPy)₂(NMe₂)₂ (6-R-SPy = 6-R-2-pyridinethiolate, 3a: R = H; 3b: R = Me; 3c: R = Ph; 3d: R = C₆H₄-4-Me; 3e: R = C₆H₄-4-t-Bu; 3f: R = C₆H₃-3,5-Me₂), and the titanium bis(2-pyridinolate) complexes, Ti(6-Ph-OPy)₂(NMe₂)₂ (6-Ph-OPy = 6-phenyl-2-pyridinolate, 8) were prepared by treating Ti(NMe₂)₄ with 2 equiv. of 6-R-2-pyridinethiol or 6-Ph-2-pyridinol. The cis-configuration of the diamido moieties in the pseudo octahedral geometry was elucidated by X-ray crystallography for 3a. Reaction of M(NMe₂)₄ (M = Ti, Zr) with 4 equiv. of 2-pyridinethiol cleanly gave tetrakis(pyridinethiolate) complexes, M(6-H-SPy)₄·THF (6: M = Ti; 7: M = Zr). The triangular dodecahedral geometries of 6 and 7 were also revealed by X-ray crystallography. These complexes catalyzed ethylene polymerization upon activation with MAO (methylaluminoxane) or MMAO (modified MAO). The catalytic activities of titanium bis(6-aryl-pyridinethiolate) systems were found to be remarkably higher than that of titanium bis(6-methyl-pyridinethiolate) system. Among the complexes synthesized in this study, Ti[6-(C₆H₃-3,5-Me₂)-SPy]₂(NMe₂)₂ (3f)/MMAO showed the highest activity (1200 kg/Ti-mol h atm) for ethylene polymerization at 60 °C under atmospheric pressure. In contrast, the activity of the corresponding 6-aryl-pyridinolate system 8/MMAO was rather low (9.3 kg/Ti-mol h atm). Both the N-S chelating structure and the bulky aryl substituents are essential for the high activities of the 6-aryl-pyridinethiolate complexes.     

Dynamic voltage and frequency management for a low-power embedded microprocessor

High-performance and low-power microprocessors are key to PDA applications. A dynamic voltage and frequency management (DVFM) scheme with leakage power compensation effect is introduced in a microprocessor with 128-bit wideband 64-Mb embedded DRAM. The DVFM scheme autonomously controls clock frequency from 8 to 123 MHz in steps of 0.5 MHz and also adaptively controls supply voltage from 0.9 to 1.6 V in steps of 5 mV, achieving 82% power reduction in personal information management scheduler application and 40% power reduction in MPEG4 movie playback. This low-power embedded microprocessor, fabricated with 0.18-/spl mu/m CMOS embedded DRAM technology, enables high-performance operations such as audio and video applications. As process technology shrinks, this adaptive leakage power compensation scheme will become more important in realizing high-performance and low-power mobile consumer applications.