Magnetostriction of binary and ternary Fe–Ga alloys

This article will review the development of the Fe–Ga (Galfenol) alloy system for magnetostriction applications including work on substitutional ternary alloying additions for magnetic property enhancement. A majority of the alloying addition research has focused on substitutional ternary elements in Bridgman grown single crystals with the intent of improving the magnetostrictive capability of the Galfenol system. Single crystals provide the ideal vehicle to assess the effectiveness of the addition on the magnetostrictive properties by eliminating grain boundary effects, orientation variations, and grain-to-grain interactions that occur when polycrystals respond to applied magnetic fields. In almost all cases, ternary additions of transition metal elements have decreased the magnetostriction values from the binary Fe–Ga alloy. Most of the ternary additions are known to stabilize the D0₃ chemical order and could be a primary contribution to the observed reduction in magnetostriction. In contrast, both Sn and Al are found to substitute chemically for Ga. For Sn additions, whose solubility is limited, no reduction in magnetostriction strains are observed when compared to the equivalent binary alloy composition. Aluminum additions, whose effect on the magnetoelastic coupling on Fe is similar to Ga, result in a rule of mixture relationship. The reviewed research suggests that phase stabilization of the disordered bcc structure is a key component to increase the magnetostriction of Fe–Ga alloys.     

Detection of West Nile virus by the polymerase chain reaction and analysis of nucleotide sequence variation

A polymerase chain reaction (PCR) assay was developed to rapidly detect and identify West Nile (WN) virus. The RNA from seven isolates of WN virus from six countries and four other flaviviruses (Kunjin, Japanese encephalitis, St. Louis encephalitis, and yellow fever viruses) was reverse-transcribed (RT) and amplified by PCR. The nucleotide sequences of the amplified products were determined by a rapid, automated DNA sequencing method. The WN virus RT/PCR assay detected the target gene segment of sequencing method. The WN virus RT/PCR assay detected the target gene segment of isolates from both the African-Middle Eastern group and the Indian group with a sensitivity of approximately 0.05 pg of viral RNA. Kunjin virus was the only other flavivirus tested that produced a band of the appropriate size. Five of seven WN virus isolates showed 92-98% homology in the nucleotide sequence of their PCR products. The sequence of one isolate was virtually identical to the published sequence of the Nigerian isolate (99.5% homology). No correlation was established between the degree of nucleotide homology, geographic location, time of isolation, or source of the isolates.     

Laboratory simulated slipstream testing of novel sulfur removal processes for gasification application

The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project is investigating an Early Entrance Coproduction Plant (EECP) concept to evaluate integrated electrical power generation and methanol production from coal and other carbonaceous feedstocks. Research, development and testing (RD&T) that is currently being conducted under the project is evaluating cost effective process systems for removing contaminants, particularly sulfur species, from the generated gas which contains mainly synthesis gas (syngas), CO₂ and steam at concentrations acceptable for the methanol synthesis catalyst. The RD&T includes laboratory testing followed by bench-scale and field testing at the SG Solutions Gasification Plant located in West Terre Haute, Indiana. Actual synthesis gas produced by the plant was utilized at system pressure and temperature for bench-scale field testing.     

A microdialysis study of the effects of the nicotinic agonist RJR-2403 on cortical release of acetylcholine and biogenic amines

Transcortical dialysis was employed to investigate the effects of subcutaneous (s.c.) injections of RJR-2403 (1.2-7.2 mumol/kg) on extracellular levels of acetylcholine (ACh), norepinephrine (NE), dopamine (DA), and serotonin (5-HT) in rat. Systemic administration of RJR-2403 produced a 90% increase of cortical extracellular ACh levels that persisted for up to 90 minutes after injection. Norepinephrine and DA release were increased 124% and 131% above basal values, respectively. Serotonin (5-HT) levels in the dialysate were also significantly elevated by RJR-2403 (3.6 mumol/kg, s.c.) 70% above baseline at 90 minutes post-injection. Comparison of these responses to those of (-)nicotine from a previous study reveals little difference between the two compounds in their ability to influence cortical neurotransmitter release following systemic administration.     

Evaluation of the aortic root by MRI: insights from patients with homozygous familial hypercholesterolemia

Hepatitis C chronically infects approximately 1.5% of Americans and is the most common clinical problem facing hepatologists. Since the virus was initially described in 1989, development of an effective therapy has been challenging. Although several different therapeutic agents have been used, no therapy has been shown to reliably eradicate the virus. Interferon-alpha, a cytokine with immunostimulatory and anti-viral properties, has become the therapy of choice for patients with chronic hepatitis C infection. Trials assessing the efficacy of interferon-alpha have characterized host and viral factors predictive of responses to treatment. A thorough understanding of these predictive factors is requisite to providing cost-effective therapeutic decisions for the patient with chronic hepatitis C infection.     

Melt filtration of recycled PVC

The separation of PVC from contaminants is one of the most important steps in recycling PVC. Earlier works have shown that one can separate PVC from other polymers by using the X-ray fluorescence technique. However, in many cases, even after careful separation, there is a remaining impurity level of about 0.1% due to the limitations of the separation processes. In many applications, impurities, particularly nonmeltables, cause defects in the PVC matrix and must be removed for best performance and appearance. Melt filtration appears to be the best technique to remove the nonmeltable impurities.     

The role of oncostatin M in animal and human connective tissue collagen turnover and its localization within the rheumatoid joint

OBJECTIVE: To study the interaction of interleukin-1alpha (IL-1alpha) and oncostatin M (OSM) in promoting cartilage collagen destruction. METHODS: Bovine, porcine, and human cartilage and human chondrocytes were studied in culture. The levels of collagenase (matrix metalloproteinase 1 [MMP-1]) and tissue inhibitor of metalloproteinases 1 (TIMP-1) were measured by bioassay and enzyme-linked immunosorbent assay (ELISA). The levels of OSM in rheumatoid synovial fluid were measured by ELISA. RESULTS: When combined with OSM, IL-1alpha, IL-1beta, and tumor necrosis factor alpha released proteoglycan and collagen from cartilage. OSM was the only member of the IL-6 family to have this effect. Human tendon also responded to IL-1alpha and OSM. OSM increased the production of MMP-1 and TIMP-1 but when combined with IL-1alpha, synergistically promoted MMP-1 production in human chondrocytes and synovial fibroblasts. High levels of OSM were found in human rheumatoid synovial fluids, and confocal microscopy showed that OSM was produced by macrophages in rheumatoid synovial tissue. CONCLUSION: These results highlight an important new mechanism by which there is irreversible loss of collagen from cartilage.     

Preservation and visualization of the sea urchin embryo blastocoelic extracellular matrix.

Several methods were utilized to visualize the structure and orientation of the blastocoelic extracellular matrix (ECM) in Strongylocentrotus purpuratus embryos at the mesenchyme blastula stage. Rapid freezing in liquid propane cooled to LN2 temperatures followed by freeze substitution was used to preserve the ECM without shrinkage due to dehydration. Scanning, transmission, and light microscopy were employed to elucidate the ECMs' structure. The blastocoelic ECM consisted of parallel fibrillar sheets that were interconnected by finer filaments and oriented along the animal-vegetal axis. The ECM completely filled the blastocoelic cavity as viewed by scanning electron microscopy. The basal lamina could be distinguished from the blastocoelic ECM as a thin coat on the plasma membrane of epithelial cells; the ECM was in contact with this coat. In contrast, the blastocoelic ECM attached directly to the plasma membrane of primary mesenchyme cells (PMC) which did not possess a basal lamina. The blastocoelic ECM was isolated as an intact "bag" and probed in a hydrated state with Con A and alcian blue. Confocal microscopy confirmed that the entire blastocoel was filled with a fibrillar ECM. These approaches offer advantages for future studies of the ECMs of sea urchin embryos and their roles in gastrulation.     

Kinetics of fatigue and creep crack propagation in PVC pipe

The kinetics of creep and fatigue crack growth in PVC pipe were studied in order to develop a methodology for predicting long‐term creep fracture from short‐term fatigue tests. Fatigue and creep crack propagation followed the conventional Paris law formulations with the same power 2.7: da/dt = A_fΔK^2.7_I and da/dt = BK^2.7_I, respectively. The activation energy for creep crack propagation, obtained from the temperature dependence of the Paris law prefactor, allowed extrapolation of high temperature creep fracture to low temperature creep crack growth rates. The activation energy for fatigue crack propagation was much lower than that for creep. Therefore, fatigue and creep could not be directly correlated by using the prefactor in the covenentional Paris law formulations. Furthermore, a unique value of the Paris law prefactor did not describe frequency and R‐ratio (amplitude) effects in fatigue crack propagation. Nevertheless, conformity of crack growth rates measured under all conditions to the same Paris law power suggested that correlation should be sought in alternative formulations of the crack growth rate.