Virtual synchronous machine-controlled grid-connected power electronic converter as a ROCOF control device for power system applications

Electrical Engineering - Rate of change of frequency (ROCOF) is an indicator of frequency stability of a power system network. Maintaining the ROCOF value within the acceptable limit is a major...     

Synthesis,spectral, structural,Hirshfeld surface and DFT studies on bis(N-(4-fluorobenzyl)-N-(2-phenylethyl)dithiocarbamato-S,S′)zinc(II) and its use for the preparation of ZnS and ZnO nanoparticles

Two new complexes, bis(N-(2-phenylethyl)-N-(4-fluorobenzyl)dithiocarbamato-S,S′)zinc(II) (1) and bis(N-(2-phenylethyl)-N-(4-chlorobenzyl)dithiocarbamato-S,S′)zinc(II) (2), have been synthesized and characterized by various physicochemical techniques. Structure of 1 has been determined by single crystal X-ray diffraction. Complex 1 is a dimer. Zinc atom is four coordinated with a distorted tetrahedral environment. Geometry optimization, geometrical parameters, molecular electrostatic potential (MEPs) and frontier molecular orbital analysis of dimeric and monomeric structures of 1 have been carried out by DFT methods and compared with the experimental X-ray diffraction data. The noncovalent interactions in the complex 1 have been analyzed using Hirshfeld surface analysis. 1 and 2 have been used as single source precursors for the preparation of zinc sulfide and zinc oxide nanoparticles. As-prepared zinc sulfides and zinc oxides have been characterized by powder X-ray diffraction (PXRD), scanning electron microscope (SEM), UV–vis absorption, photoluminence and energy dispersive X-ray spectroscopy (EDS). X-ray diffraction study reveals that zinc sulfides and zinc oxides are composed of rhombohedral and hexagonal phases, respectively. Photocatalytic activities of zinc sulfides and zinc oxides were evaluated by degradation of rhodamine B in aqueous solution under UV light irradiation. The results demonstrated the capability of zinc sulfides and zinc oxides as photocatalyst under UV irradiation to degrade the dye.     

Data-driven construction of Convex Region Surrogate models

With the increasing trend of solving more complex and integrated optimization problems, there is a need for developing process models that are sufficiently accurate as well as computationally efficient. In this work, we develop an algorithm for the data-driven construction of a type of surrogate model that can be formulated as a set of mixed-integer linear constraints, yet still provide good approximations of nonlinearities and nonconvexities. In such a surrogate model, which we refer to as Convex Region Surrogate (CRS), the feasible region is given by the union of convex regions in the form of polytopes, and for each region, the corresponding cost function can be approximated by a linear function. The general problem is as follows: given a set of data points in the parameter space and a scalar cost value associated with each data point, find a CRS model that approximates the feasible region and cost function indicated by the given data points. We present a two-phase algorithm to solve this problem and demonstrate its effectiveness with an extensive computational study as well as a real-world case study.     

Functional finishing in cotton fabrics using zinc oxide nanoparticles

Nanotechnology, according to the National Nanotechnology Initiative (NNI), is defined as utilization of structure with at least one dimension of nanometer size for the construction of materials, devices or systems with novel or significantly improved properties due to their nano-size. The nanostructures are capable of enhancing the physical properties of conventional textiles, in areas such as anti-microbial properties, water repellence, soil-resistance, anti-static, anti-infrared and flame-retardant properties, dyeability, colour fastness and strength of textile materials. In the present work, zinc oxide nanoparticles were prepared by wet chemical method using zinc nitrate and sodium hydroxide as precursors and soluble starch as stabilizing agent. These nanoparticles, which have an average size of 40 nm, were coated on the bleached cotton fabrics (plain weave, 30 s count) using acrylic binder and functional properties of coated fabrics were studied. On an average of 75%, UV blocking was recorded for the cotton fabrics treated with 2% ZnO nanoparticles. Air permeability of the nano-ZnO coated fabrics was significantly higher than the control, hence the increased breathability. In case of nano-ZnO coated fabric, due to its nano-size and uniform distribution, friction was significantly lower than the bulk-ZnO coated fabric as studied by Instron® Automated Materials Testing System. Further studies are under way to evaluate wash fastness, antimicrobial properties, abrasion properties and fabric handle properties.     

Mechanosynthesis of Triazolyl-bis(indolyl)methane Pharmacophores via Gold Catalysis: A Prelude to Their Molecular Electronic Properties and Biological Potency

Chemical structures possessing both 1,2,3-triazole and bis(indolyl)methane fragments gained considerable interest in drug synthesis owing to their established biological efficacies. However, 1,2,3-triazoles linked at the bridging position of bis(indolyl)methane is a logical and unexplored design approach. In this regard, nine new triazolyl-bis(indolyl)methane conjugates under AuCl catalyzed ball-milling conditions were accomplished. Comparative evaluation on absorptive and emissive properties of the synthesized dyads were also analyzed. To unravel the influence of different peripheral substituents on the electronic structure and π-orbital properties, theoretical investigations were performed. Screening of molecules for free radical scavenging, anti-inflammatory and antidiabetic showed comparable potency against reference drugs. In particular, compounds 7 h , 7 d and 7 a displayed good efficiency of α-amylase inhibition. The DNA gyrase inhibitory potential of all compounds were assessed in silico which revealed high binding affinity (ΔG=−8.99 Kcal/mol) for 7 i followed by 7 h (ΔG=−7.80 Kcal/mol) with the targeted protein.     

Modification of poovan banana (Musa AAB) starch by γ‐irradiation: effect on in vitro digestibility,molecular structure and physico‐chemical properties

This study focussed at evaluating the effect of gamma irradiation on the in vitro digestibility, molecular structure and physico‐chemical properties of poovan banana (Musa AAB) starch using γ‐rays from a ⁶⁰Co source at different doses with a dose rate of 2 kGy h^?1. Physico‐chemical properties varied significantly and exhibited strong dose‐dependent relationship. Escalating irradiation leads to decrease in amylose content, pH, swelling power of the starch granules and syneresis of the gelatinised starch, while the same led to an increase in carboxyl content, in vitro digestibility, solubility and water absorption capacity of the starch granules. The results revealed that peak, hold, final and setback viscosities were significantly reduced. X‐ray diffraction pattern remained the same upon irradiation but a decrease in relative crystallinity was observed with increasing irradiation dose. Gelatinisation temperature and enthalpy decreased significantly when the increasing the dose of gamma irradiation.     

可扩充嵌入型网络平台Xilinx提供弹性化以太网络解决方案让您能针对各种应用的效能与成本需求开发客制化方案

大多数的嵌入式产品都需要一个网络或通信界面.由于具备低成本、普遍性、以及能透过像TCP/IP等通信协议连上因特网之特性,以太网络(Ethernet)成为其中最广为采用的网络界面.     

Worst‐case design of subsea production facilities using semi‐infinite programming

The problem of designing novel process systems for deployment in extreme and hostile environments is addressed. Specifically, the process system of interest is a subsea production facility for ultra deepwater oil and gas production. The costs associated with operational failures in deepwater environments are prohibitively high and, therefore, warrant the application of worst‐case design strategies. That is, prior to the construction and deployment of a process, a certificate of robust feasibility is obtained for the proposed design. The concept of worst‐case design is addressed by formulating the design feasibility problem as a semi‐infinite optimization problem with implicit functions embedded. A basic model of a subsea production facility is presented for a case study of rigorous performance and safety verification. Relying on recent advances in global optimization of implicit functions and semi‐infinite programming, the design feasibility problem is solved, demonstrating that this approach is effective in addressing the problem of worst‐case design of novel process systems. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2513–2524, 2014