Yield Stress and Microstructure of Set Yogurt Made from High Hydrostatic Pressure-Treated Full Fat Milk

ABSTRACT: Set yogurts were prepared from fortified milk subjected to the following processes: (a) Thermal process (85C,°C,35 min), (b) High hydrostatic pressure process (193 or 676 MPa for 5 or 30 min), and (c) Nonprocessed milk (control). Yogurts from milk treated with 676 MPa for 30 min exhibited similar yield stress and water-holding capacity (WHC) to yogurts from heated milk. Transmission Electron Microscopy (TEM) micrographs exhibited small round casein micelle aggregates without appendages in yogurts from heated milk. Yogurts from milk treated with 193 MPa and untreated milk exhibited low yield stress, low WHC, and large clusters of coalesced micelles. Mechanisms for gel formation are discussed.     

Complete nucleotide sequence of HTLV-II isolate NRA: comparison of envelope sequence variation of HTLV-II isolates from U.S. blood donors and U.S. and Italian i.v. drug users

Seven cardiac electrophysiology stimulators from four manufacturers (Biotronik, Bloom, Digitimer and Medtronic) in common current use are reviewed. The stimulators differ in the features provided and the design adopted to achieve these features. The number of output channels ranges from one to four, the number of extra-stimuli available ranges from two to six, and these can be delivered as a variety of sequences. Some of the stimulators (Digitimer and Bloom) are modular while others (Biotronik and Medtronic 532 series) are of an integrated design comprising a single physical unit. The design of the Medtronic EP-2 has both integrated and modular characteristics. The features of the stimulators associated with input, output, control and the user interface are specifically reviewed. The features are also compared against the published recommendations of the American Heart Association. In addition, a summary of stimulator user comments from a number of electrophysiology centres is presented. All of the stimulators fulfil, or are close to fulfilling, basic electrophysiological requirements, but some provide more complex facilities such as would be required by specialist centres.     

Net glutamate release from astrocytes is not induced by extracellular potassium concentrations attainable in brain

Elevated extracellular potassium concentration ([K+]e) has been shown to induce reversal of glial Na+-dependent glutamate uptake in whole-cell patch clamp preparations. It is uncertain, however, whether elevated [K+]e similarly induces a net glutamate efflux from intact cells with a physiological intracellular milieu. To answer this question, astrocyte cultures prepared from rat and mouse cortices were incubated in medium with elevated [K+]e (by equimolar substitution of K+ for Na+), and glutamate accumulation was measured by HPLC. With [K+]e elevations to 60 mM, medium glutamate concentrations did not increase during incubation periods of 5-120 min. By contrast, 45 min of combined inhibition of glycolytic and oxidative ATP production increased medium glutamate concentrations 50-100-fold. Similar results were obtained in both rat and mouse cultures. Studies were also performed using astrocytes loaded with the nonmetabolized glutamate tracer D-aspartate, and parallel results were obtained; no increase in medium D-aspartate content resulted from [K+]e elevation up to 90 mM, whereas a large increase occurred during inhibition of energy metabolism. These results suggest that a net efflux of glutamate from intact astrocytes is not induced by any [K+]e attainable in brain.     

Using a microstrip bandpass filter to compare different circuit analysis techniques

A 22.5-GHz microstrip bandpass filter is analyzed using three different circuit analysis techniques. Circuit theory modeling fails to provide an accurate prediction when compared to measured data. But a hybrid analysis, which uses electromagnetic field solver computations and circuit theory models, provides good agreement with measured data. A more complete field solver analysis of the filter also shows good agreement when compared to measurements. In the later two cases, the electromagnetic analysis captures the actual current distribution on the filter that circuit theory fails to predict. © 1995 John Wiley & Sons, Inc.     

Starch–poly(ethylene-co-acrylic acid) composite films. Effect of processing conditions on morphology and properties

Formulations containing 4 parts cornstrach, 5 parts poly(ethylene-co-acrylic) (EAA), 1 part urea, and 1.6 parts of either water or aqueous ammonia were extruded at either 110–120°C or 150–160°C; and the resulting extrudates were then extrusion-blown into films. Complex formation between EAA and starch was measured by either X-ray diffraction or by solvent extraction of uncomplexed EAA. Although the processing temperature had only a minor effect on the amount of EAA complexed by starch, use of aqueous ammonia rather than water in these formulations increased the amount of complexed EAA by about a factor of 2. In films prepared with aqueous ammonia, the polysaccharide phase was present as submicron-sized domains. When ammonia was omitted from these formulations, the polysaccharide phase was less uniform in size and contained particles that were over an order of magnitude larger than those observed with ammonia.     

Effects of aging and schedules of knowledge of results on motor learning

Little research has been conducted on aging and the learning of motor skills. In this study, we examined the effects of different schedules of knowledge of results (KR) on the acquisition and retention of a movement timing task by young adults (20-23 years) and older adults (60-82 years). The results indicated that there were differences between young and older adults in the accuracy and consistency of motor performance when KR was provided. Accuracy effects persisted during a retention interval when KR was no longer provided, although there were no differences in variability. There were no interactions of age with any of the KR-related variables. These findings suggest that the ability to process KR, and the effects of KR on motor learning, are similar in young and older adults. These findings are discussed in terms of age-related issues in movement control and learning processes.     

Aldosterone and dexamethasone stimulate calcineurin activity through a transcription-independent mechanism involving steroid receptor-associated heat shock proteins

1. PD 81,723 has been shown to enhance binding of adenosine to A1 receptors by stabilizing G protein-receptor coupling ('allosteric enhancement'). Evidence has been provided that in the perfused hearts and isolated atria PD 81,723 causes a sensitization to adenosine via this mechanism. 2. We have studied the effect of PD 81,723 in guinea-pig isolated atrial myocytes by use of whole-cell measurement of the muscarinic K+ current (I[K(ACh)]) activated by different Gi-coupled receptors (A1, M2, sphingolipid). PD 81,273 caused inhibition of I[K(ACh)] (IC50 approximately 5 microM) activated by either of the three receptors. Receptor-independent I[K(ACh)] in cells loaded with GTP-gamma-S and background I[K(ACh)], which contributes to the resting conductance of atrial myocytes, were equally sensitive to PD 81,723. At no combination of concentrations of adenosine and PD 81,723 could an enhancing effect be detected. 3. The compound was active from the outside only. Loading of the cells with PD 81,723 (50 microM) via the patch pipette did not affect either I[K(ACh)] or its sensitivity to adenosine. We suggest that PD 81,723 acts as an inhibitor of inward rectifying K+ channels; this is supported by the finding that ventricular I(K1), which shares a large degree of homology with the proteins (GIRK1/GIRK4) forming I[K(ACh)] but is not G protein-gated, was also blocked by this compound. 4. It is concluded that the functional effects of PD 81,723 described in the literature are not mediated by the A1 adenosine receptor-Gi-I[K(ACh)] pathway.     

Mechanisms involved in the intrinsic isoniazid resistance of Mycobacterium avium

Isoniazid (INH), which acts by inhibiting mycolic acid biosynthesis, is very potent against the tuberculous mycobacteria. It is about 100-fold less effective against Mycobacterium avium. This difference has often been attributed to a decreased permeability of the cell wall. We measured the rate of conversion of radiolabelled INH to 4-pyridylmethanol by whole cells and cell-free extracts and estimated the permeability barrier imposed by the cell wall to INH influx in Mycobacterium tuberculosis and M. avium. There was no significant difference in the relative permeability to INH between these two species. However, the total conversion rate in M. tuberculosis was found to be four times greater. Examination of in vitro-generated mutants revealed that the major resistance mechanism for both species is loss of the catalase-peroxidase KatG. Analysis of lipid and protein biosynthetic profiles demonstrated that the molecular target of activated INH was identical for both species. M. avium, however, formed colonies at INH concentrations inhibitory for mycolic acid biosynthesis. These mycolate-deficient M. avium exhibited altered colony morphologies, modified cell wall ultrastructure and were 10-fold more sensitive to treatment with hydrophobic antibiotics, such as rifampin. These findings may significantly impact the design of new therapeutic regimens for the treatment of infections with atypical mycobacteria.     

High-Performance Multilayer Capacitor Dielectrics from Chemically Prepared Powders

Advantages of chemically prepared powders for electronic ceramics have been demonstrated for a number of multilayer capacitor (MLC) dielectrics. A cost-efficient precipitation process was developed to produce undoped or doped crystalline barium titanate powder with a narrow particle size distribution close to 0.5 μm. More complex compositions, e.g., barium-neodymium titanate, were amorphous as precipitated but could be crystallized by calcination below 1000°C. Additional compositional modifications, to adjust electrical properties or to lower sintering temperature, were accomplished by doping the surface of the powder particles using a solution coating process. Exceptional fired densities and electrical performance were obtained.