Structure of Profiled Crystals Based on Solid Solutions of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> and Their X-Ray Diagnostics

In this work, we used x-ray structural diagnostic data to reveal the formation of structural regularities in profiled polycrystalline ingots based on Bi and Sb chalcogenide solid solutions. In Bi₂Te₃ lattice crystals, the solid phase grows such that the cleavage surfaces are perpendicular to the crystallization front. The crystallization singularity determines the nature of the growth texture. Because texture is an important factor determining the anisotropy of properties, which in turn determines the suitability of an ingot for production of modules and the possibility of figure of merit improvement, its diagnostics is an important issue for technology testing. Examples of texture analysis using the method of straight pole figure (SPF) construction for profiled crystals are provided. The structure of the surface layers in the profiled ingots was studied after electroerosion cutting. In addition, the method of estimation of the disturbed layer depth based on the nature of texture changes was used.     

Analysis of anisotropy of properties on the basis of studies of texture of coarse-grained ingots of thermoelectric materials

An analysis of anisotropy of the properties of a Bi₂Se_0.3Te_2.7 solid solution was carried out using construction of demonstrative surfaces for thermoelectric effectiveness and thermal expansion coefficients. It is shown that the texture is an important factor forming anisotropy of properties and technological fitness of ingots for manufacturing modules. Anisotropy of properties based on the studies of the ingot textures obtained using the float-zone method and Bridgman method (growing thermoelectric plates in a flat cavity) was studied.     

Determination of the whiteness of viscose fibres processed with optical bleaches

Conclusions The possibility has been shown of using a Zeiss leucometer for obtaining a comparative reproducible index of the whiteness of fibres processed with OB. The reflection factor of the light from the samples with a blue colour filter can serve as such an index.Klin Combine. All-Union Correspondence Institute of Textile and Light Industries (VZITLP). Translated from Khimicheskie Volokna, No. 6, pp. 64–65, November–December, 1969.     

Energy Expenditure Upon the Formation of the Elastically Stressed State in the Layers of a Step-Graded Metamorphic Buffer in a Heterostructure Grown on a (001) GaAs Substrate

Semiconductors - On the basis of data on X-ray structural analysis performed by the method of reciprocal-space mapping and investigations using secondary-ion mass spectrometry and transmission...     

Structure and conductivity of yttria and scandia‐doped zirconia crystals grown by skull melting

In this paper a detailed study of the (ZrO₂)_1‐x(Y₂O₃)_x (x=0.025–0.15), (ZrO₂)_1‐x(Sc₂O₃)_x (x = 0.06 – 0.11) and (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y (x=0.07 – 0.11; y=0.01 – 0.04) solid solution crystals grown by skull melting technique is presented. The structure, phase composition, and ion conductivity of the obtained crystals were investigated by X‐ray diffraction, transmission electron microscopy, Raman scattering spectroscopy, and impedance spectroscopy. Maximum conductivity as (ZrO₂)_1‐x(Y₂O₃)_x and (ZrO₂)_1‐x(Sc₂O₃)_x solid solution crystals is observed for the compositions containing 10 mol% stabilizing oxide, and the conductivity of 10ScSZ is ~3 times higher than for 10YSZ. Experiments on crystal growth (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y solid solutions showed that uniform, transparent crystals 7Sc3YSZ, 7Sc4YSZ, 8Sc2YSZ, 8Sc3YSZ, 9Sc2YSZ, 9Sc3YSZ, 10Sc1YSZ, and 10Sc2YSZ are single phase crystal containing t″ phase. It is established that a necessary condition of melt growth of (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y single‐phase crystals is the total concentration of the stabilizing oxides from 10 to 12 mol%. The addition of Y₂O₃ affects the (ZrO₂)_1‐x‐y(Sc₂O₃)_x(Y₂O₃)_y solid solution conductivity different ways and depends on the Sc₂O₃ content in the starting composition. The effects of structure, phase composition, concentration, and type of stabilizing oxides on the electrical characteristics of obtained crystals are discussed.     

Structure of Bi<Subscript>2</Subscript>Se<Subscript>0.3</Subscript>Te<Subscript>2.7</Subscript> alloy plates obtained by crystallization in a flat cavity by the Bridgman method

The property anisotropy in Bi₂Se_0.3Te_2.7 alloy is analyzed by constructing index surfaces for the thermoelectric figure of merit and thermal expansion coefficient. Texture is an important factor forming the property anisotropy and technological applicability of an ingot for fabricating modules. The property anisotropy is analyzed based on studying the texture in ingots produced by the modified Bridgman method (thermoelectric plate growth in a flat cavity). Analysis of the texture shows that not only the crystallization rate, but also the crystallization cavity design is an important factor for the proposed crystallization method, affecting the formation of the thermoelectric-material structure. As the plate thickness is decreased by changing the heat removal conditions in a thin gap, a more perfect structure can be obtained.     

Effect of dysprosium on the kinetics and structural transformations during the decomposition of the supersaturated solid solution in magnesium–samarium alloys

The effect of dysprosium added in the amounts such that it does not form an individual phase in equilibrium with solid magnesium on the decomposition of the supersaturated magnesium solid solution in Mg–Sm alloys is studied. The presence of dysprosium in Mg–Sm alloys is found to retard the decomposition of the supersaturated magnesium solid solution and to increase the hardening effect upon aging. When these alloys are aged, dysprosium is partly retained in the magnesium solid solution and partly enters into the compositions of the phases that form during the decomposition of the solid solution and are characteristic of Mg–Sm alloys.     

MXene-containing composite electrodes for hydrogen evolution: Material design aspects and approaches for electrode fabrication

This work explores the possibilities for the processing of Ni- and Ti₃C₂T_x (T = OH, O) MXene-containing composite electrodes, by co-pressing and plastic deformation or by etching of the electrodes prepared directly by self-propagation high-temperature synthesis (SHS). Various material design approaches were also explored. In order to tune the Ti₃C₂ interlayer distance in Ti₃C₂Al MAX phase, an introduction of additional Al to form Ti₃C₂Al_z materials with z > 1 was attempted. Self-propagation high-temperature synthesis of powder mixtures with extra Ni and Al content (e.g. Ni:Ti:Al:C = 1:2:3:1) resulted in SHS products containing Ti₃C₂Al_z z > 1 material and Ni–Al alloys. Further etching of these products in 10M NaOH allowed the direct formation of electrodes with active surface containing Ti₃C₂T_x (T = OH, O) MXene- and Raney nickel-containing composites. The electrochemical studies were focused on hydrogen evolution and showed the potential for boosting the electrochemical reaction in Ni and MXene-containing composite electrodes, especially at high current densities. The guidelines for the processing of such electrodes under fluorine-free conditions are proposed and discussed.