一种用于SOC设计中的智能I/O处理器的实现

文章介绍了SOC设计流程，智能I／O处理器组成，在开发该处理器对VHDL源代码的优化问题。     

关于化粪池几个问题的探讨

探讨化粪池在设计布置及使用管理中应注意的几个问题，以充分发挥化粪池在保护环境，减轻污染方面的作用。     

A systematic design method to obtain broadband characteristics for singly-fed electromagnetically coupled patch antennas for circular polarization

We present a systematic, empirical design technique to obtain optimum broadband impedance, axial-ratio (AR) and gain bandwidths for a singly-fed electromagnetically coupled patch antenna for circular polarization. Our investigation has also revealed tradeoffs amongst obtainable AR, impedance bandwidth and AR bandwidth. Using two design examples at different frequency bands and for different senses of circular polarization, we have demonstrated the effectiveness of the proposed knowledge-based tuning method. We have obtained at C-band measured values of impedance bandwidth (VSWR/spl les/2) equal to 43%, 3-dB AR bandwidth of 8%, AR of less than 0.3 dB and a mean gain level of 7 dB. For the Ku-band element, a 40% impedance bandwidth and a 17.3% of 3-dB AR bandwidth have been obtained with a peak gain of 7.2 dBic.     

无约束淬火机目标温度神经网络预报

淬火、控制冷却的冷却速度和目标温度是关系到钢板性能的关键因素 ,但由于冷却过程的水量、水温、辊道速度等对冷却目标温度的影响属多变量非线性过程 ,用简单的解析模型通常精度较低 ,难以达到精确控制的要求。采用人工神经网络技术对无约束淬火机目标温度进行快速预报 ,结果表明 ,预测精度高 ,快速准确     

新年贺词

雄鸡高唱 ,万象更新 !带着盎然春意 ,带着勃勃生机 ,2 0 0 5年向我们大步走来 !值此新年到来之际 ,谨向关心、爱护、支持《消防技术与产品信息》杂志的各界朋友和广大读者致以亲切的问候和最美好的祝愿 !党的十六届四中全会通过的《中共中央关于加强党的执政能力建设的决定》提出 ,要“发挥社团、行业组织和社会中介组织提供服务、反映诉求、规范行为的作用 ,形成社会管理和社会服务的合力”,对社团、行业组织寄予厚望。我们决心在公安部和中国科协的领导下 ,紧紧围绕消防中心工作 ,进一步做好协会的各项工作 ,为发展我国的消防事业服务 ,更…     

改进的遮挡条件下瞳孔检测方法

受到眼睑、睫毛、反光等干扰,提取的瞳孔往往无法近似成标准的椭圆,给瞳孔精确检测带来了难度。针对遮挡问题,提出了一种改进的遮挡瞳孔精确检测方法,该方法首先获取瞳孔图像的感兴趣区域,在对该区域进行阈值分割的基础上,通过滤波去噪和扫描线法去除光源反光的影响;根据沿遮挡瞳孔的分界线进行水平旋转,应用内接平行四边形法确定瞳孔的中心;根据圆形检测理论,提出一种中心修正算法,将求得的两个圆的交点作为眼睑与瞳孔的交点,计算出旋转角度,从而精化瞳孔中心的定位;最后利用五点法计算得到的瞳孔椭圆参数作为初始值,通过最小化拟合椭圆与边缘点之间的欧氏距离,使得该椭圆在非线性最小二乘意义下是最优的。实验结果表明,该方法具有良好的鲁棒性和准确性,在遮挡不超过瞳孔面积一半的情况下,能得到较为精确的瞳孔位置和边界。     

层流冷却工艺在首钢迁钢热轧分厂的应用

介绍了首钢迁钢公司2160热轧分厂层流冷却的工艺布置、冷却区的结构组成、操作模式、冷却制度及冷却系统的控制功能。该系统投产后，带材的卷取温度偏差可控制在±8℃以内，且96．8％的产品卷取温度偏差可控制在±5℃内，从而有利于提高产品的性能和表面质量，也为生产高质量的产品打下坚实基础。     

Enhanced corrosion prevention effect of polysulfone–clay nanocomposite materials prepared by solution dispersion

A series of polymer–clay nanocomposite (PCN) materials containing polysulfone (PSF) and layered MMT clay were successfully prepared by effectively dispersing inorganic nanolayers of MMT clay in an organic PSF matrix via a solution dispersion technique. The synthesized PCN materials were subsequently investigated with a series of characterization techniques, including Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The prepared PCN coatings with low clay loading (1 wt %) on cold‐rolled steel (CRS) were found to be superior in corrosion prevention to those of bulk PSF, based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and electrochemical impedance spectroscopy (EIS) in a 5 wt % aqueous NaCl electrolyte. The effects of material composition on the molecular barrier, mechanical strength and optical clarity of PSF and PCN materials, in the form of membranes, was also studied by molecular permeability analysis (GPA), dynamic mechanical analysis (DMA) and UV‐Visible transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 631–637, 2004     

Isothermal crystallization kinetics and morphology development of isotactic polypropylene blends with atactic polypropylene

The crystallization kinetics and morphology development of pure isotactic polypropylene (iPP) homopolymer and iPP blended with atactic polypropylene (aPP) at different aPP contents and the isothermal crystallization temperatures were studied with differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized optical microscopy. The spherulitic morphologies of pure iPP and larger amounts of aPP for iPP blends showed the negative spherulite, whereas that of smaller amounts of aPP for the iPP blends showed a combination of positive and negative spherulites. This indicated that the morphology transition of the spherulite may have been due to changes the crystal forms of iPP in the iPP blends during crystallization. Therefore, with smaller amounts of aPP, the spherulitic density and overall crystallinity of the iPP blends increased with increasing aPP and presented a lower degree of perfection of the γ form coexisting with the α form of iPP during crystallization. However, with larger amounts of aPP, the spherulitic density and overall crystallinity of the iPP blends decreased and reduced the γ‐form crystals with increasing aPP. These results indicate that the aPP molecules hindered the nucleation rate and promoted the molecular motion and growth rate of iPP with smaller amounts of aPP and hindered both the nucleation rate and growth rate of iPP with larger amounts of aPP during isothermal crystallization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1093–1104, 2007     

车载安全应用广播性能分析*

在仿真软件NS-2.29和VanetMobiSim1.1下,搭建了车载通信网络仿真平台,讨论了广播信标信息在不同距离下的接收率,并对两类广播信息在EDCA方式下的接收率和接入时延进行了深入的分析和比较。仿真结果表明,隐藏终端导致广播数据的严重丢包而且不同竞争窗口对接入时延有很大的影响,尤其是在信道负荷比较重时。最后指出了可行的解决思路。