The tone sense multiaccess protocols with partial collisiondetections (TSMA/PCD) for packet satellite communications

The tone sense multiaccess with partial collision detection (TSMA/PCD) protocol is particularly suitable for a packet satellite system serving an area with a dense population of earth stations. By incorporating a narrowband ground radio channel for broadcasting busy ones, the earth stations are able to avoid packet collisions by sensing for the absence of busy tones before transmitting packets. Partial collision detection capability can also be achieved. Single-tone TSMA/PCD gives 97% of the carrier-sense multiaccess with collision detection (CSMA/CD) throughput when N=10 tones are used, while for multitone and slot-by-slot announcement TSMA/PCD protocols only N=8 and N=2, respectively, are sufficient to drive the system to the CSMA/CD performance     

Analysis of adaptive routing schemes in multirate loss networks

As technology evolves, it is now feasible to implement sophisticated adaptive routing schemes on networks which support different kinds of services with heterogeneous bandwidth characteristics. Adaptive routing can increase the network throughput by routing calls to less congested paths. It can also be used to bypass transmission facility failures. In this paper, we analyze and compare two adaptive routing schemes. The first is called theMaximum mean time to blocking (MTB) routing which is based on themean time to blocking measure of a link. This measure captures the traffic rates, bandwidth characteristic and link capacity information and reflects more accurately the congestion status of different paths. The second is theM ² routing, which is a modification of the least loaded routing (LLR). Aggregation of link status information can significantly reduce signalling traffic. We show in this paper that with properly designed aggregation, the aggregatedM ² and MTB routings can have performance that approach that of the non-aggregated schemes. The use of complete sharing and restricted access policies together with trunk reservation control in multirate loss networks are also studied.     

Data mining of resilience indicators

In recent years, the Asia-Pacific region has experienced several financial setbacks, including speculative attacks in 1998 and the SARS outbreak in 2003. Financial stresses of this nature are unanticipated, and not all of the dangers can be predicted by the examination of market information and macroeconomic indicators. The Early Warning System (EWS) that has been adopted by the International Monetary Fund may not be able to predict future financial crises for all possible scenarios, because shocks come in many different forms. To supplement the EWS, this paper proposes a data mining framework to measure the resilience of an economy. The resilience framework does not predict a crisis, but rather assesses the current state of health of an economy and its ability to withstand a financial shock should one occur. The framework is based on a feedback system consisting of two stages. The first stage assigns a resilience score to each economy based on a fuzzy logic scoring scheme that is built on the ambiguous reasoning of experts. The second stage uses the classification tree approach to estimate thresholds for each economic indicator, and examines the quality of the fuzzy score. The result from the second stage is then passed back to the first stage as feedback. The final result is obtained when the feedback system reaches its equilibrium state. The proposed resilience framework is applied to the external-sector and the public-sector economies of several countries to illustrate its applicability.     

A study on the dynamic characteristics of the Korean Yi-dynasty bell type structure

The dynamic characteristics of the Korean Yi-dynasty bell type structure, including the acoustic effects, are analyzed both theoretically and experimentally. The numerical solutions of natural frequencies and mode shape for membrane and flexural behavior are obtained by using the NASTRAN program for the finite element method with plate shell elements of triangular and quadrilateral types. Test bells, A and B types similar to the Kap-Sa bell in Kong-Ju chosen among typical Korean Yi-dynasty bells, are manufactured on different scales to the original bell. To consider the effects of the variation of the structural dimension on the dynamic response, these bells are analyzed with respect to the variation of the thickness of the wall and the bottom rim and the asymmetric Dang-Jwas. The impact method with the Fast Fourier Transform Analyzer is adopted to experimentally assess the dynamic response. Results are in good agreement with the numerical solutions.     

Encapsulation mechanism of N2 molecules into the central hollow of carbon nitride multiwalled nanofibers

Nitrogen molecules have been encapsulated into the central hollows of vertically aligned carbon nitride (CN) multiwalled nanofibers by dc plasma-enhanced chemical vapor deposition with C₂H₂, NH₃, and N₂ gases on a Ni/TiN/Si(1 0 0) substrate at 650 °C. X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure spectra showed the existence of nitrogen molecules in CN nanofibers. Elemental mapping images with electron energy loss spectroscopy of the CN nanofiber and catalyst metal, and optical emission spectroscopy spectra of the plasma showed the distribution of nitrogen atoms and molecules in the CN nanofiber, catalyst metal, and gaseous precursor, respectively. These studies showed that atomic nitrogen diffused into the catalytic metal particle because of the concentration gradient and then saturated at the bottom of the particle. Saturated nitrogen atom participated in the formation of the CN nanofiber wall but most of nitrogen was trapped in the central hollow of the nanofiber as molecules.     

Finite-element analysis for magnetic resonance image artifact evaluation

The static magnetic field of a magnetic resonance imaging scanner can be distorted by the presence of materials, perturbing the spatial encoding process in magnetic resonance imaging and often resulting in image artifacts. The relationship between the image artifact size and magnetic susceptibility of the material specimen is of interest to engineers for the design of devices that are to be compatible with the imaging volume of the scanner. In this study, a finite-element method was used to simulate the distorted magnetic field of samples with different susceptibilities. With the knowledge of the external- and self- magnetic field interactions, a Lorentz correction was applied to compute the magnetic field deviation. The simulated results were then validated by the corresponding experimental magnetic resonance images.     

Reexamination of slow relaxation of polymer chains in sol-gel transition

Using [2+2] photocycloaddition of coumarin groups attached to the PMMA chain backbone, we can gradually transfer a semidilute copolymer solution to a uniform speckle-free gel. We reexamined the effects of concentration, crosslinking density, solvent quality on the controversial scaling exponent (α_s) between the linewidth (Γ_s) of the slow mode and the scattering vector (q) during the sol-gel transition. Our results suggest that the slow mode is attributed to large thermally agitated density fluctuation and revealed that the variation of α_s is due to the relative length of 1/q to the correlation length (ξ) of the density fluctuation; namely, if ξ>1/q, α_s→3, while when ξ<1/q, α_s→2.     

Nitrous oxide "analgesia": resemblance to opiate action

Nitrous oxide produced a dose-related "analgesia" in mice (median effective dose, 55 percent). The analgesia was evaluated by means of a phenylquinone writhing test. Narcotic antagonists or chronic morphinization reduced nitrous oxide analgesia. Either nitrous oxide releases an endogenous analgesic or narcotic antagonists have analgesic antagonist properties heretofore unappreciated.     

Experiments on thermal stratification in inlet nozzle of steam generator

Nuclear power plant components suffer pipe shedding, cracking, thermal fatigue, bending and supporting bracket breakage during their life span. Notably, the horizontal inlet nozzle of steam generator is prone to thermal stratification frequently due to its operational characteristics. As a result, PWRs in many countries including the U.S.A. suffered a lot of pipe cracks and leakages around the late 1970s, as the thermal stress inflicted by thermal stratification formed in the horizontal inlet nozzle of steam generator during transition (auxiliary feedwater injection) was not reflected on power plant design. Therefore, we classified the nuclear power plants in Korea into KSNP and Westinghouse-type(W) power plants (Kori # 1,2,3,4, Yeonggwang # 1,2 and Uljin # 1,2) and conducted an experiment on thermal stratification and thermal cycling in relation to the volume of auxiliary feedwater injected into the horizontal inlet nozzle of steam generator and hot water flowing back from steam generator. As a result, it was found out that KSNP was hardly prone to thermal stratification while thermal stratification occurred in the horizontal inlet nozzle of steam generator in Westinghouse-tvpe(W) power plants, necessitating a solution to address such a phenomenon.••