Synthesis, Characterization, and Formation Process of Na-X Zeolite from Coal Fly Ash

Using the SiO₂ and Al₂O₃ components of the amorphous phase in coal fly ash (Fa), Fa was converted to Na-X zeolites in NaOH-NaAlO₂ solutions by stirring at 35°C for 72 hr and then aging at 85°C for a given period. The molar ratio SiO₂/Al₂O₃ of the starting materials was controlled from 2.0 to 13.2. The resulting materials were characterized by various means. Increasing the SiO₂/Al₂O₃ ratio of the starting material increased the degree of crystallinity of faujasite, exhibiting a maximum at SiO₂/Al₂O₃ = 8.0. The faujasite formed was identified as Na-X zeolite with Si/Al = 1.20. The amorphous phase in Fa was dissolved during the stirring to form a precursor of zeolite, such as amorphous aluminosilicate. The Na-X zeolite was formed by aging for 24 hr, and the degree of crystallinity of this material was increased with the increasing aging period. The cation exchange capacity and specific surface area were increased with the increasing degree of crystallinity of the Na-X zeolites.     

Superconductivity in W-containing diamond-like nanocomposite films

Superconductivity in a tungsten-containing carbon-oxide film was reported. The film with 500 nm thickness was deposited onto polycrystalline silicon oxides using chemical vapor deposition and the co-sputtering of a tungsten metal target. The bonding state of the carbon atoms and the macroscopic and microscopic crystal structure of the film were investigated by Raman spectroscopy, X-ray diffraction and transmission electron microscopy measurements. From the experimental results, we determined that this film essentially had an amorphous structure. The temperature dependence on resistivity was measured in the temperature range of 2–300 K. Resistive superconducting transition was observed at 3.8 K. The dc magnetizations were measured in the temperature range of 1.8–6.5 K. The diamagnetism resulting from a superconductive state was observed below 3.75 K, which is consistent with a resistive superconducting transition. It is thought that the finite sized clusters of the different superconductive transition temperatures cooperatively produce a macroscopic superconducting phenomenon.     

Temperature Dependence of the Raman Spectrum in Lithium Oxide Single Crystal

Temperature dependence of the Raman spectrum of lithium oxide single crystal has been measured over a temperature range of 80 to 1073 K. The frequency shift and the line width of the Raman spectrum in lithium oxide were about 531 and 4.5 cm^-1 at 80 K, respectively. At 1073 K, the frequency shift and the line width attained the values of 464 and 112 cm^-1, respectively. The strong temperature dependence of the frequency shift and line width was compared with data from some crystals with a fluorite structure.     

An effect of microstructure on the interface resistance between a perovskite-type oxide electrode and yttria-stabilized zirconia

The electrode characteristics of perovskite-type oxides, La_0.6Sr_0.4CoO₃ and La_0.6Sr_0.4MnO₃, on ceria-based oxide and stabilized zirconia were analysed by the a.c. impedance method. The ionic conductivities of the electrolyte and electrode conductivities from the a.c. impedance analysis agreed with those obtained from the current interruption and d.c. four-probe methods. Two semicircles from the charge transfer and diffusion processes appeared as the electrode resistance. The relative contribution of these two processes to the overall electrode resistance strongly depended on the microstructure of the electrode. The electrode microstructure could be controlled by the dispersion medium used for the electrode slurry. The La_0.6Sr_0.4MnO₃ electrode coated with n-butyl acetate slurry exhibited the smallest electrode resistance.     

Online-Religion in Japan: Websites and Religious Counseling from a Comparative Cross-Cultural Perspective

This article considers the nature of online religion by examining the websites and religious counseling activities conducted by new Japanese religions. Beginning with an overview of the widespread use of the Internet in Japan and its use in religion, the article examines the cultural and social factors that keep the religious use of the Internet from becoming as pervasive in Japan as it is in the U.S. The article then describes a website with elements of online religion and the Internet-based religious counseling services being provided by ministers of the new Shintō-derived religions of Konkōkyō and Tenrikyō. These activities have successfully given some people who need religious assistance access to religious teaching. In concluding, the article examines the reasons for the success of these efforts, as well as the reasons why they have not expanded in scope, in light of the cultural and organizational advantages and disadvantages that affect Internet use.     

Determination of erythema-effective solar radiation in Japan and Germany with a spore monolayer film optimized for the detection of UVB and UVA--results of a field campaign

A centrifugation method was used to investigate the accumulation of 14C-rifampicin by Staphylococcus aureus and Escherichia coli, and to characterize the mechanism of rifampicin transport into S. aureus. For both species, drug accumulation was rapid with the steady-state concentration (SSC) reached within 40 s of drug exposure. Rifampicin accumulation by S. aureus was temperature and pH dependent; the lower the experimental temperature and the lower the experimental pH, the lower was the concentration of rifampicin accumulated. Accumulation was unaffected by the presence of inhibitors of antibiotic efflux, carbonyl cyanide m-chlorophenylhydrazone (CCCP), dinitrophenol (DNP), or reserpine. Exposure to increasing concentrations of rifampicin suggested that the accumulation process was saturable above a rifampicin concentration of 0.2 mg/L. Michaelis-Menten kinetics gave an apparent Km and Vmax for rifampicin, calculated from a Lineweaver-Burk plot, of 0.05 mg/L (0.06 microM) and 3.8 ng rifampicin per second, respectively. However, calculations suggest that these values reflect those for binding of rifampicin to its target, RNA polymerase.     

Some characteristics of a cellular receptor for virulent infectious bursal disease virus by using flow cytometry

A flow cytometric virus binding assay that directly visualizes the binding of infectious bursal disease virus (IBDV) to its target cells was established. The chicken B lymphoblastoid cell line, LSCC-BK3, which is permissive for IBDV infection, bound high levels of the virus. Another B lymphoblastoid cell line, LSCC-1104-B1, bound low levels of the virus, although it was nonpermissive. No virus binding was detected in nonpermissive T lymphoblastoid cell lines. In the binding assay to heterogeneous cell populations of chicken lymphocytes, IBDV (a highly virulent OKYM strain) bound to 94% cells in the lymphocytes prepared from the bursa of Fabricius, 37% cells in those prepared from the spleen, 3% cells in those prepared from the thymus, and 21% cells in those prepared from the blood. Most of the cells, which bound the virus, were surface immunoglobulin M (SIgM)-positive, but a small number of them were SIgM-negative. Additionally, the binding of IBDV to the LSCC-BK3 cells was affected by treatment of the cells with proteases and N-glycosylation inhibitors. These findings may indicate that the IBDV host range is mainly controlled by the presence of a virus receptor composed of N-glycosylated protein associated with the subtle differentiation stage of B-lymphocytes represented mostly by SIgM-bearing cells.     

Synthesis and electronic property of platinum nanowire and nanoparticle in mesoporous silica template

Platinum nanowires and nanoparticles were selectively synthesized in mesoporous silicas FSM-16 and HMM-1. The nanowires are 3 nm in diameter and several hundred nm to μm in length with high crystallinity. Pt nanowires and nanoparticles can be isolated by dissolving silica matrix with HF. The Pt wires extracted from organosilica HMM-1 have a nanonecklace structure, while the wires from siliceous FSM-16 have a nanorod structure. The extracted Pt nanoparticles (3 nm in size) on HOPG show the Coulomb staircase phenomena in STM/STS analysis. The mechanism for formation of the Pt nanowires is based on the migration of Pt ions in the mesoporous channels.     

Extraction and implementation of muscle synergies in neuro-mechanical control of upper limb movement

This work faces the redundancy problem, a central concern in robotics, in a particular force-producing task by using muscle synergies to simplify the control. We extracted muscle synergies from human electromyograph signals and interpreted the physical meaning of the identified muscle synergies. Based on the human analysis results, we hypothesized a novel control framework that can explain the mechanism of the human motor control. The framework was tested in controlling a pneumatic-driven robotic arm to perform a reaching task. This control method, which uses only two synergies as manipulated variables for driving antagonistic pneumatic artificial muscles to generate desired movements, would be useful to deal with the redundancy problem; thus, suggesting a simple but efficient control for human-like robots to work safely and compliantly with humans.