A Multi-Criteria Route Selection Method for Vehicles Using Genetic Algorithms Based on Driver’s Preference

Wireless Personal Communications - Finding the best path between a given source and a destination in a road network is an important problem. It has its applications in various map services and...     

Pinch Roller Failure Analysis and Resulting Enhancement of Rebar Mechanical Properties

Reinforcing bars, popularly termed “rebars,” are used to impart tensile strength to concrete structures. Concrete has high resistance to weathering and fire and high compressive strength but almost no tensile strength, hence rebars are used to provide the latter to concrete. Property consistency along the length of rebars is an important prerequisite. When the finished product is subjected to thermomechanical treatment (TMT), proper control of rolling and water box parameters and efficient pinch rolling are needed to achieve acceptable properties. Variation of yield strength (YS) along TMT bars from the front to back end has been observed within the same heat treatment. In the presented investigation, it was observed that pinch rolling ineffectiveness is the main reason for the poor mechanical properties at the back end. The pinch roller was unable to support the back end of the TMT bars properly to maintain the speed and tension of the bars, resulting in nonuniform cooling of the back end through the water box and subsequent mechanical property failure. Due to the substandard material of the pinch roller, it was unable to hold the back end of the bar properly. Based on analysis of the roller it was concluded that it failed due to improper microstructure, resulting in inadequate hardness and toughness for the stringent operating conditions. AISI H13 is a better material to use in such high-service-temperature conditions. Moreover, proper heat treatment is needed to achieve adequate hardness and microstructure properties. After proper heat treatment of pinch rollers, their service life was increased twofold, minimizing the YS variation along the rebars.     

Oxidation and Oxidative Bromination Reactions Catalyzed By a Reusable Polymer-Anchored Iron(III) Complex in Water at Room Temperature

A polymer-anchored iron(III) catalyst was synthesized and characterized. Its catalytic activity was evaluated for the oxidation of various alkenes, sulfides, aromatic alcohols and ethylbenzene with 30 % H₂O₂ as the oxidizing agent. The catalyst was also effective for the oxidative bromination reaction with 80–100 % selectivity of monobrominated products with H₂O₂/KBr at room temperature. The above reactions require a minimum amount of H₂O₂ and short reaction time. Most importantly, all the above reactions occur in aqueous medium. The catalyst can be facilely recovered and reused six-atimes without significant decrease in its activity and selectivity.     

Efficient processing of oil–water emulsions confined within 2D cylinders with various microwave irradiations: Role of metallic annulus

Extensive studies have been carried out to investigate the role of metallic annulus on efficient microwave processing of oil–water emulsions confined within 2D cylinders in the presence of lateral/radial irradiations. A preliminary study has been carried out via average power within a sample vs. sample diameter to estimate microwave power absorptions for various o/w and w/o emulsions with specific fractions of the dispersed phase (?) in the absence of metallic annulus. Based on those studies, various regimes (sample dimension) have been identified for each emulsion (o/w or w/o) based on appropriate length scales. Two types of metallic annular configurations have been considered such as circular and square annuli for further analysis via average power vs. aspect ratio (a) distribution for each regime. Based on that study, suitable aspect ratios have been chosen to carry out detailed analysis on spatial power and temperature distributions for each regime with metallic annuli. Finally, optimal heating strategies have been recommended based on two significant factors such as ‘large heating rate’ with ‘minimal thermal runaway’ for various regimes of o/w and w/o emulsions. It is observed that average power absorptions show greater intensification due to metallic annulus for most of the regimes of o/w emulsions than that for corresponding regimes of w/o emulsions due to lateral and/or radial irradiations. However, in general, for regimes with smaller diameters (for both o/w and w/o samples) radial irradiation is favored, whereas for large regimes, lateral irradiation is favored as the optimal heating strategies.     

Traffic grooming,routing, and wavelength assignment in an optical WDM mesh networks based on clique partitioning

In wavelength routed optical networks, the number of wavelength channels is limited due to several constraints and each wavelength as well as each lightpath support traffic in the Gbps range. On the other hand, the traffic requested by an individual connection is still in the Mbps range. Therefore, to utilize the network resources (such as bandwidth and transceivers) effectively, several low-speed traffic streams have to be efficiently groomed or multiplexed into one or more high-speed lightpaths. The grooming problem of a static demand is considered as an optimization problem. In this work, we have investigated the traffic grooming problem with the objective of maximizing the network throughput for wavelength-routed mesh networks and map this problem to the clique partitioning problem. We have proposed an algorithm to handle general multi-hop static traffic grooming based on the clique partitioning concept. The efficiency of our approach has been established through extensive simulation on different sets of traffic demands with different bandwidth granularities for different network topologies and compared the approach with existing algorithms.     

A copper–cyclen coordination complex associated with a polyoxometalate anion: Synthesis,crystal structure and electrochemistry of [Cu(cyclen)(MeCN)][W6O19]

The reaction between Cu(NO₃)₂·3H₂O and a tetra-aza macrocycle, more specifically, cyclen in 1:1 MeCN–MeOH solvent mixture forms a Cu²⁺–cyclen coordination complex in situ, that has been reacted with an isopolyanion [W₆O₁₉]^2? in a slow diffusion technique, resulting in the isolation of an ion-pair solid [Cu(cyclen)(MeCN)][W₆O₁₉] (1). Single crystal structural investigation on 1 shows a square pyramidal geometry around the metal centre (copper ion) with an axially bound MeCN solvent molecule. The title compound 1 is the first crystallographically characterized ion-pair compound, in which a transition metal coordination complex of a tetra-aza-crown ether (cyclen) has been associated with a polyoxometalate cluster anion. This communication deals with synthesis, spectroscopic, structural and electrochemical analyses of compound 1.     

Role of length scales on microwave thawing dynamics in 2D cylinders

Microwave (MW) thawing of 2D frozen cylinders exposed to uniform plane waves from one face, is modeled using the effective heat capacity formulation with the MW power obtained from the electric field equations. Computations are illustrated for tylose (23% methyl cellulose gel) which melts over a range of temperatures giving rise to a mushy zone. Within the mushy region the dielectric properties are functions of the liquid volume fraction. The resulting coupled, time dependent non-linear equations are solved using the Galerkin finite element method with a fixed mesh. Our method efficiently captures the multiple connected thawed domains that arise due to the penetration of MWs in the sample. For a cylinder of diameter D, the two length scales that control the thawing dynamics are D/D_p and D/λ_m, where D_p and λ_m are the penetration depth and wavelength of radiation in the sample respectively. For D/D_p, D/λ_m?1 power absorption is uniform and thawing occurs almost simultaneously across the sample (Regime I). For D/D_p?1 thawing is seen to occur from the incident face, since the power decays exponentially into the sample (Regime III). At intermediate values, 0.2<D/D_p, D/λ_m<2.0 (Regime II) thawing occurs from the unexposed face at smaller diameters, from both faces at intermediate diameters and from the exposed and central regions at larger diameters. Average power absorption during thawing indicates a monotonic rise in Regime I and a monotonic decrease in Regime III. Local maxima in the average power observed for samples in Regime II are due to internal resonances within the sample. Thawing time increases monotonically with sample diameter and temperature gradients in the sample generally increase from Regime I to Regime III.     

Influence of various shapes of annular metallic support on microwave heating of 2D cylinders

A detailed analysis has been shown to illustrate the influence of various shapes of annular metallic support on microwave heating of 2D cylinders for beef samples. The beef samples are chosen to represent typical food materials with high dielectric loss. A preliminary analysis on microwave heating of samples has been shown via average power within a sample vs cylinder radius diagram in the absence of support and three regimes have been identified such that regimes I and III denote the local minima in average power and regime II corresponds to a maxima in average power. In addition, regime I corresponds to a spatial maxima in power at the unexposed face, regime II corresponds to maxima in power at both the exposed and unexposed faces and regime III has two maxima at the exposed face and the center of the sample. The influence of support has been illustrated with average power distribution vs aspect ratio (φ) diagram. Three types of cross sections of annular supports such as circular (type I), horizontal square (type II) and inclined square (type III) are considered. It has been observed that the average power is enhanced due to the metallic support for φ?0.3. Type I support would correspond larger power distributions and heating rates, for regimes I and II whereas for regime III, the square shaped supports correspond to greater heating rates at larger aspect ratios. The location of spatial maxima in power or heating rate is found to be shifted due to metallic support with high aspect ratios. The shape of the support plays important role on localized heating for the samples corresponding to regime III.