Localized corrosion of (lean) duplex stainless steels in immersion units of urban wastewater treatment plants

With lower alloying cost and higher mechanical properties, lean duplex stainless steels can be an alternative to the more commonly used austenitic stainless steels. However, these alloys are still not the preferred choice, probably due to a lack of field experience. A study was thus initiated in view of defining the limits of use of selected (lean) duplexes for urban wastewater treatment units. The present paper shows the localized corrosion performance of selected lean duplexes in chloride contaminated solutions. The results are compared with austenitic S30403 and S31603 and with the more standard duplexes S82441 and S32205. The effect of welding was also investigated. Exposures in field municipal wastewater plants were conducted for 1 year in low and high chloride content units. The results show that lean duplexes S32101 and S32202 can be used as alternatives to S30403 and S31603 in low chloride electrolytes. At 500 ppm of chloride content, duplex stainless steel S32304 showed better corrosion resistance than S30403 and S31603. For higher chloride contents (1000 ppm and above) the standard duplexes S82441 and S32205 shall be preferred.     

IR与RS-232的匹配技术

现代电子设备通常包含最新的数据通信接口，以实现更高的数据率或增进用户的便利性。红外技术(IR)是数据通信接口的一个很好例子，但有时单独使用这种最新接口还是不够的，设备还需要与采用传统接口如RS-232的老设备兼容才会被用户所接受。因此，常见的红外技术和RS-232共存于同一设备中。     

用于便携无线设备的Wireless TrenchTM技术

射频电路设计人员常用的一条经验法则是:有源器件的fT至少应为工作频率的十倍时,现代无线设备中的射频电路才会具有良好的性能.     

Agglomeration and networks in spatial economies

We consider the parallel developments in the economics of agglomeration and the economics of networks. We explore the complementarities between the productivity benefits of agglomeration and those of network linkages, arguing that networks of actors dispersed over space may substitute for agglomerations of actors at a single point.JEL Classification: D20, L14, R30     

Manufacturing method for monolithic dye-sensitised solar cells permitting long-term stable low-power modules

A manufacturing technique for monolithic dye-sensitised solar cells is presented. Encapsulated modules designed for indoor low-power applications have been prepared using industrial methods and equipment. Under certain conditions (light intensity <5000 lx, temperature between –10°C and 50°C, and relative humidity of appr. 50%), the modules have performed well and shown excellent long-term stability. Moreover, modules withstand illumination in combination with storage at 100% relative humidity. However, a certain degradation of the module performance takes place at illuminations exceeding 5000 lx and temperatures exceeding 50°C.     

Structure and surface properties of diaminocyclohexane plasma polymer films

Plasma polymers of three isomers of diaminocyclohexane (DACH) were deposited on polyethylene, SiO₂, and mica at 20°C. The deposition rate was measured as a function of plasma density and power; a maximum was observed in the latter function. The deposition rate was highest for the monomer with the highest flow rate. The film refractive index was observed to increase with both power density and the degree of fragmentation in the plasma. Film composition was measured by elementary analysis, and was found to be almost identical for each of the three isomers; a mechanism for the polymerization reaction is proposed. The percentage of primary amino groups decreased with increasing power density and with film thickness. Surface force measurements of the thickness and refractive index agreed well with the corresponding ellipsometry values in dry air, and am adhesive force, independent of power density, was measured. When the film was exposed to water vapor, it swelled considerably and the adhesion was determined by capillary forces. Associated with swelling, at high power, was an extremely regular 2-ply rope pattern of protruding material. © 1993 John Wiley & Sons. Inc.     

Some spatial equilibria in facility investment under uncertain demand

This paper describes the spatial distribution of customer demand, supply of customer services and facility investment, as the outcome of a three-level game-like interaction between customers (e.g., shoppers), suppliers (e.g., retailers) and developers (e.g., landlords). Treating both the suppliers and developers at each centre as competitors, oligopolistic equilibria of the Nash-Stackelberg type are developed, and conditions for their existence and uniqueness established. Uncertain customer demand is specified in probabilistic terms, representing the suppliers' perception of expected customer behaviour.