In situ TEM observations of fracture in nanolaminated metallic thin films

Fracture of single crystal nanolaminated thin films has been investigated through in situ straining of cross-sectional samples of Cu/Ni nanolaminates grown on Cu (001) single crystal substrates. The earlest stages of deformation exhibits a confined layer slip mechanism. With continued straining, unstable fracture occurs creating a mixed-mode crack that propagates across the nanolaminate, roughly perpendicular to the interfaces. Eventually, stable crack growth with intense plastic deformation ahead of the crack tip occurs over many bilayers in the direction of crack growth. Simultaneously, plasticity was seen to spread only 1 or 2 bilayer distances normal to the crack, creating an extremely localized plastic zone. Transmission electron microscopic (TEM) examination after the test did not reveal the presence of dislocations in the crack wake, except where severe crack deflection was observed. By comparison, the plastic zone size in the substrate was greater by several of orders of magnitude.     

Analysis of volatiles evolved during high-temperature treatment of thermally stable polymers. I. Nitrogen-containing acetylene-terminated resin

Cured samples of a nitrogen-containing acetylene-terminated resin, N,N′-(1,3-phenylene-dimethylidene)bis(3-ethynylaniline), have been heated at 10°C/min up to 900°C in a pyroprobe attached to a gas chromatograph/mass spectrometer (GC/MS). Analysis of the volatiles evolved during heating identified both gases and higher boiling compounds. The major higher boiling compounds are benzene, toluene, xylene, aniline, benzonitrile, m-methylaniline, and m-methylbenzonitrile; the gases include ammonia, methane, and traces of carbon dioxide. Correlations between sample temperature and the evolution of each of these compounds have been made. The onset of all volatile formation occurs between 450 and 500°C. The higher boiling volatiles peak, then end by approximately 700°C, while the gases peak then fall off but are still being evolved at 900°C. Average weight loss measurements of 13.6% at 700°C and 15.7% at 900°C agree with previously published thermogravimetric analysis (TGA) data. © 1993 John Wiley & Sons, Inc.     

Termites live in a material world: exploration of their ability to differentiate between food sources.

Drywood termites are able to assess wood size using vibratory signals, although the exact mechanism behind this assessment ability is not known. Important vibratory characteristics such as the modal frequencies of a wooden block depend on its geometry and boundary conditions; however, they are also dependent on the material characteristics of the block, such as mass, density and internal damping. We report here on choice experiments that tested the ability of the drywood termite Cryptotermes secundus to assess wooden block size using a solid wooden block paired with a composite block, the latter made of either wood and aluminium or wood and rubber. Each composite block was constructed to match mass or low-frequency vibratory modes (i.e. fundamental frequency) of the solid wooden block. The termites always chose the blocks with more wood; they moved to the solid wooden blocks usually within a day and then tunnelled further into the solid wooden block by the end of the experiment. Termites offered composite blocks of wood and rubber matched for mass were the slowest to show a preference for the solid wooden block and this preference was the least definitive of any treatment, which indicated that mass and/or damping may play a role in food assessment. This result clearly shows that the termites were not fooled by composite blocks matched for mass or frequency, which implies that they probably employ more than a single simple measure in their food assessment strategy. This implies a degree of sophistication in their ability to assess their environment hitherto unknown. The potential importance of alternative features in the vibrational signals is discussed.     

Directly Compressible Acetaminophen Compositions Prepared by Fluidized-Bed Granulation

Polyvinylpyrrolidone (PVP) in aqueous solution was used as a binding agent in a fluidized-bed system to agglomerate acetaminophen powder into directly compressible granules. It was found that a minimal amount of 5% w/w PVP in a concentration of 7.5% w/v or less was needed to produce granules with an acceptable flow and the corresponding tablets having enough hardness without capping. There was a strong correlation between the time for 80% dissolved (T₈₀) and the logarithm of granule volume-surface mean diameter. A directly compressible acetaminophen composition to manufacture tablets having a T₈₀ value less than 30 min can be prepared simply by adding an appropriate amount of disintegrant (crospovidone, sodium starch glycolate, or pregelatinized starch) to the agglomerated granules.     

Insect chitinases: molecular biology and potential use as biopesticides

Chitin, an insoluble structural polysaccharide that occurs in the exoskeletal and gut linings of insects, is a metabolic target of selective pest control agents. One potential biopesticide is the insect molting enzyme, chitinase, which degrades chitin to low molecular weight, soluble and insoluble oligosaccharides. For several years, our laboratories have been characterizing this enzyme and its gene. Most recently, we have been developing chitinase for use as a biopesticide to control insect and also fungal pests. Chitinases have been isolated from the tobacco hornworm, Manduca sexta, and several other insect species, and some of their chemical, physical, and kinetic properties have been determined. Also, cDNA and genomic clones for the chitinase from the hornworm have been isolated and characterized. Transgenic plants that express hornworm chitinase constitutively have been generated and found to exhibit host plant resistance. A transformed entomopathogenic virus that produces the enzyme displayed enhanced insecticidal activity. Chitinase also potentiated the efficacy of the toxin from the microbial insecticide, Bacillus thuringiensis. Insect chitinase and its gene are now available for biopesticidal applications in integrated pest management programs. Current knowledge regarding the molecular biology and biopesticidal action of insect and several other types of chitinases is described in this mini-review.     

Plasma GABA in children and adolescents with mood, behavior, and comorbid mood and behavior disorders: a preliminary study

Plasma GABA concentrations (pGABA) were measured in 115 inpatients (aged 7-17) with child psychiatric disorders. Group mean pGABAs were compared for 38 patients with mood disorders only (MOOD), 29 with behavior disorders only (BEH), 48 with comorbid mood and behavior disorders (MOOD + BEH), and 14 normal controls (CON, aged 14-17). The BEH group was characterized by (a) high mean pGABAs (157 vs. 133 pmol/ml), (b) lower mean pGABAs in BEH subjects who had been receiving pharmacotherapy with SSRIs or other medications (p < 0.026), and (c) decreased pGABA with increasing age (p = 0.019). These features were not found in controls or in groups of patients with mood disorders (MOOD or MOOD + BEH). Elevated mean pGABA in the BEH group appeared specifically in patients with comorbid CD and ADHD, not in patients with ADHD or CD alone (p = 0.004). No patient in BEH (or CON) had pGABA below 100 pmol/ml, but low pGABAs were found in 15% of MOOD patients (who had no behavior disorder) and in 16% of MOOD + BEH patients. Pharmacotherapy did not change pGABAs in the MOOD or the MOOD + BEH groups. No pGABA differences were found among the anxiety disorders, either alone or with mood or behavior comorbidity. The finding that plasma GABA levels are elevated in nonmedicated behavior disorders that present in the absence of mood disorders, and appear to lower following medication treatments, merits increased attention to the pharmacological study of nonaffective behavior disorders.     

A new efficient dcvs circuit synthesis technique used for an improved implementation of a serial/parallel multiplier

This paper describes an efficient technique for the design of fault-secure VLSI circuits based on differential cascode voltage switch (DCVS) logic. We propose a new synthesis method for constructing DCVS circuits with a near-optimal transistor count based on binary decision diagrams (BDDs). the time and memory resources required are very low, making the technique practical even for PC-based synthesis tools. This method is the basis for a CAD tool that allows automatic synthesis of fault-secure circuits based on the DCVS technology. We finally present an improved design and implementation of a 2's complement serial/parallel multiplier as an application of the proposed technique and algorithm.     

Evaluation of Qbd for electrons tunneling fromthe Si/SiO2 interface compared to electron tunneling from thepoly-Si/SiO2 interface

Electrical time-to-breakdown (TTB) measurements have shown the charge to breakdown Q_bd of gate oxide capacitors fabricated on n-type well (n-well) substrates always to be higher than that of capacitors on p-type well (p-well) substrates on the same wafer when both are biased into accumulation under normal test conditions. Here the authors correlate the higher n-well Q_bd to smooth capacitor oxide/substrate interfaces and minimized grain boundary cusps at the poly-Si gate/oxide interfaces, confirming that Fowler-Nordheim tunneling is the dominant current conduction mechanisms through the oxide. They correlate higher Q_bd to higher barrier height for a given substrate type and observe that the slope of the barrier height versus temperature plot is lower for both p-well and n-well cases with electrons tunneling from the silicon substrate. This is attributed to surface roughness at the poly-Si gate/SiO₂ interface. A poly-Si gate deposition and annealing process with clean, smooth oxide/substrate interfaces will improve the p-well breakdown characteristics and allow higher Q_bd to be achieved