The influence of iodide on glass transition temperature of high-pressure nuclear waste glasses

The glass transition temperature (T_g) is a key parameter to investigate for application in nuclear waste immobilization in borosilicate glasses. T_g for several glasses containing iodine (I) has been measured in order to determine the I effect on T_g. Two series of glass composition (ISG and NH) containing up to 2.5 mol% I and synthesized under high pressure (0.5 to 1.5 GPa) have been investigated using differential scanning calorimetry (DSC). The I local environment in glasses has been determined using X-ray photoelectron spectroscopy and revealed that I is dissolved under its iodide form (I⁻). Results show that T_g is decreased with the I addition in the glass in agreement with previous results. We also observed that this T_g decrease is a strong function of glass composition. For NH, 2.5 mol% I induces a decrease of 24°C in T_g, whereas for ISG, 1.2 mol% decreases the T_g by 64°C. We interpret this difference as the result of the I dissolution mechanism and its effect on the polymerization of the boron network. The I dissolution in ISG is accompanied by a depolymerization of the boron network, whereas it is the opposite in NH. Although ISG corresponds to a standardized glass, for the particular case of I immobilization it appears less adequate than NH considering that the decrease in T_g for NH is small in comparison to ISG.     

Passivation effects of deuterium exposure on boron-doped CVD homoepitaxial diamond

The deuterium (hydrogen) passivation effect on acceptors in boron-doped CVD homoepitaxial diamond was studied by electrical (Hall-effect) and secondary ion mass spectroscopy (SIMS) measurements. Deuterium was incorporated into the samples using microwave (MW) deuterium plasma at 673 K for 2–24 h. We observed the progress of acceptor passivation with p-type conduction, which finally resulted in a highly resistive state.     

Three-dimensional display of the bronchi using helical CT

The purpose of this study was to evaluate the clinical usefulness of three-dimensional (3D) images of the bronchi obtained using helical CT. Thirteen patients with lung cancer, one with tracheal diverticulum, and one with bronchial amyloidosis were examined. The CT scanner employed was the Toshiba Xforce. The helical CT scan cycle consisted of 20 continuous rotations, each requiring 1.5 sec, for a total scanning time of 30 sec. Scans were obtained using a 5-mm X-ray beam width, a 5-mm/1.5 sec couchtop sliding speed, and a 2-mm reconstruction interval. 3D images were reconstructed using a CEMAX VIPstation. The optimal lower and upper threshold CT values for 3D images of the bronchi were -650 and -100 HU, respectively, and 3D images clearly depicted endobronchial lesions. Cartilage crescents were also demonstrated, but longitudinal and circular mucosal folds could not be visualized. In conclusion, 3D images of the bronchi acquired using helical CT were useful in evaluating endobronchial lesions.     

Stereoscopic synthesized brain-surface imaging with MR angiography for localization of a peripheral mycotic aneurysm: case report

A patient with subacute bacterial endocarditis and a peripheral mycotic aneurysm is presented. We used a combined multi-slice surface anatomy scanning (SAS) and contrast-enhanced MR angiography image to determine the exact location of the small lesion by applying a skin marker on the scalp and visualizing the relationship of the marker to the brain surface structures and to the lesion. This technique was useful for the removal of a small peripheral aneurysm using only a limited craniotomy.     

Measurement of human red blood cell deformability using a single micropore on a thin Si3N4 film

The filtration method for the evaluation of the RBC deformability has been further refined to simulate the deformations encountered in the recticuloendothelial system (in particular the spleen), a recognized site of aged and sickled cells removal. The core of the developed measuring system is a very thin (0.4 micron thick) filter that consists of single micropore (diameters down to 1 micron) on a Si3N4 film which has been constructed using silicon microfabrication techniques. Individual RBC's deformability is quantified measuring the cell pore passage time. From one blood sample 200 passage times are analyzed by a computer, displaying mean and median values as deformability indexes, and class and cumulative histograms for studying the passage times distribution. In this paper the effectiveness of the developed system as a routine clinical evaluation tool is demonstrated by studying several factors that are known to affect the RBC deformability, such as temperature, addition of diamide and glutaraldehyde, and blood storage conditions. In addition, it is experimentally demonstrated that the human RBC can traverse a pore with a diameter as small as 1 micron when the pore length is very short, thus broadening the experimental conditions under which the RBC deformability (fluidity) can be studied.     

A flexible random allocation program for multi-institutional clinical trials

This paper describes a flexible random allocation program that assigns treatments to patients according to their prognostic factors in multi-institutional clinical trials. The source lists are available in the appendix of this paper. This program is based on Pocock and Simon's minimization method and Zelen's method for institution balancing. The numbers of institutions, treatments, and prognostic factors can be set arbitrarily. The maximum number of institutions, treatments, or prognostic factors that can be accommodated by the program is limited only by the size of the main memory. For example, an IBM-PC with a 640KB main memory can run a program of 1500 institutions, 4 treatments and 20 prognostic factors.     

EPR study of hydrogen-related defects in boron-doped p-type CVD homoepitaxial diamond films

Boron-doped p-type single crystalline chemical vapor deposition (CVD) homoepitaxial diamond films were investigated by electron paramagnetic resonance (EPR). Carbon dangling bond defects, which were accompanied by a nearby hydrogen atom, were observed in boron-doped p-type CVD diamond films on a IIa substrate similar to those observed in undoped diamond. This result suggested that the energy level position of the defects is located below the Fermi energy of boron-doped diamond, at around 0.3 eV above the valence-band top. The reason why the Fermi energy could be changed by the incorporation of boron atoms at low density (10¹⁶–10¹⁷/cm³) in the film in spite of the existence of the large defect density of EPR centers (10¹⁸/cm³) is thought to be that the singly occupied electron states of defects are located near the band edge. As for the thermal annealing effect of the defects, it was revealed that the concentration of the defects and the mobility of the p-type film did not change after annealing up to 1200 °C which is much higher than the temperature of boron–hydrogen pair dissociation.