An Electron Spin Resonance Study of Evolution of Organic Free Radicals in Irradiated Pepper During Heat Treatment

ABSTRACT: The thermal evolution behavior of the organic free radicals induced in irradiated black pepper was studied by electron spin resonance spectroscopy. To analyze the time-dependent evolution process, we used the theory of transient phenomena, that is, an ordinal differential equation, as well as the nonlinear least squares numerical method. We found that the radical evolution that occurred in the irradiated pepper obeys a single exponential function and yields a unique time constant. The evolution of the organic free radical undergoes a simple reaction process of a single radical species.     

Effect of the dilation caused by helium bubbles on edge dislocation motion in α-iron: molecular dynamics simulation

Various types of nanometric defects such as voids and helium (He) bubbles produced by high-energy neutron irradiations are known to degrade the mechanical properties of irradiated materials. In this study, we have evaluated the obstacle strength of He bubbles to the mobility of an edge dislocation in α-iron for 2 and 4 nm bubbles with He-to-vacancy (He/V) ratios ranging from 0 to 1 at 300 and 500 K, by molecular dynamics simulation. Results showed that as the He/V ratio increases, the obstacle strength needed for the release of a dislocation from the bubble becomes stronger up to a moderate He/V ratio (0.6 and 0.4 for 2 and 4 nm bubbles, respectively, at both temperatures), and a further increase in the He/V ratio leads to weakening of the obstacle strength. For He/V = 1, the obstacle strengths are 10–30% weaker than those at moderate He/V ratios depending on the bubble size and temperature. The extent of obstacle strength was found to be correlated with the dilation caused by He bubbles depending on the bubble size, He/V ratio, and temperature.     

Strength of spline joints assembled by forming

In this paper, a new assembling method of spline joints that enables tight fitting in a simple manner by allowing slight plastic deformation at the spline teeth was introduced. Experiments were carried out for the spline joints of medium carbon steel varying the overlap zone between the male and the female spline teeth. Axial joining strength was increased with increase in the overlap length due to the residual compressive stress by forming. The joint by the proposed method also showed higher torsional strength than the conventional joint. Improvement in the torsional strength was explained based on the deformation and hardness distribution around the spline teeth. With respect to the shape of overlap zone, better results were obtained when using the specimen having a uniform overlap length along the axial direction.     

Mechanism of Magnetite Seam Formation and its Role for FeO Scale Transformation

The phase transformation behavior of a thermally grown oxide scale of FeO on pure-Fe and an Fe–2wt%Au alloy was investigated. Particular attention was paid to formation of a magnetite seam, which is the Fe₃O₄ layer formed at the FeO/alloy interface at an initial stage of the phase transformation, since it has important effects on the overall phase transformation of FeO scale. A thin Au(Fe) layer was found to develop on the Fe–Au alloy at the FeO/alloy interface after 32 min of oxidation at 750 °C in air. This Au(Fe) layer prevented formation of a magnetite seam and accelerated the FeO eutectoid reaction. The Au(Fe) layer acted as a “chemical diffusion barrier” for inward diffusion of Fe from the FeO to the alloy substrate across the FeO/alloy interface and prevented magnetite seam formation.     

EFFECT OF DRYING METHOD ON MESOPOROSITY OF RESORCINOL-FORMALDEHYDE DRYGEL AND CARBON GEL

Resorcinol-formaldehyde hydrogels were synthesized by sol-gel polycondensation of resorcinol with formaldehyde in a slightly basic aqueous solution. RF cryogels, RF xerogels, and RF xerogels (MW gels) were respectively prepared from RF hydrogels by freeze drying, hot air drying, and microwave drying. Carbon cryogels, carbon xerogels and carbon MW gels were subsequently obtained by pyrolyzing RF drygels in an inert atmosphere. Freeze drying and microwave drying were effective to prepare mesoporous RF drygels and carbon gels. RF cryogels and carbon cryogels showed high mesoporosity over wide ranges of the molar ratio of resorcinol to catalyst (R/C) and the ratio of resorcinol to water (R/W) used in sol-gel polycondensation. Although RF xerogels had a few mesopores, carbon xerogels had no mesopores. RF MW gels and carbon MW gels showed mesoporosity if appropriate values of R/C and R/W were selected.     

Current status and future prospect of in‐cell‐polarizer technology

Abstract— A thin‐crystalline‐film (TCF) polarizer has been developed which can be used internally in liquid‐crystal‐display cells. Based on this material, a manufacturing process has been developed for the fabrication of monochrome LCDs with internal polarizers. A new TCF polarizer material and coating equipment, developed to realize a high‐performance color TFT‐LCD, are discussed.     

Fluorogenic derivatization reagents suitable for isolation and identification of cysteine-containing proteins utilizing high-performance liquid chromatography-tandem mass spectrometry

The fluorogenic derivatization reagents with a positive charge, 4-(dimethylaminoethylaminosulfonyl)-7-chloro-2,1,3-benzoxadiazole (DAABD-Cl) and 7-chloro-2,1,3-benzoxadiazole-4-sulfonylaminoethyltrimethylammonium chloride (TAABD-Cl), are proposed for use in proteomics studies. Following derivatization of protein mixtures with these reagents, a series of standard processes of isolation, digestion, and identification of the proteins were performed utilizing high-performance liquid chromatography-fluorescence detection and tandem mass spectrometry with the probability-based protein identification algorithm. Both DAABD and TAABD derivatives were detected fluorometrically at the femtomole level and showed more than 100-fold improvement in sensitivity compared to the underivatized original compounds with an electrospray ionization ion trap mass spectrometer analysis. The modification of the MASCOT database search system memorized with the fragment information of a DAABD-attached Cys residue allowed the identification of the proteolytic peptide fragments of the derivatized bovine serum albumin (BSA) with an estimated 38% sequence coverage of BSA. Utilizing DAABD-Cl as a derivatization reagent, identification of several proteins was also possible in a soluble extract of Caenorhabditis elegans (10 microg of protein). Consequently, for identification of proteins in the complex matrixes of proteins, DAABD-Cl could be a more appropriate reagent than ammonium 7-fluoro-2,1,3-benzoxadiazole-4-sulfonate as reported previously.     

Amphiphilic Poly(Amino Acid) Nanoparticles Induce Size‐Dependent Dendritic Cell Maturation

Size‐regulated amphiphilic poly(amino acid) nanoparticles (NPs) composed of poly(γ‐glutamic acid) (γ‐PGA) and the hydrophobic amino acid derivative, L ‐phenylalanine ethyl ester (Phe) are prepared to evaluate the effects of particle size on dendritic cell (DC) uptake of NPs and their immune stimulatory activities as delivery carriers and adjuvants. The size of the Phe‐conjugated γ‐PGA NPs (γ‐PGA–Phe NPs) is easily controlled by regulating the aggregated γ‐PGA–Phe numbers. Each of the differently sized γ‐PGA–Phe NPs could efficiently encapsulate ovalbumin (OVA), and the amount of encapsulated OVA per milligram of NPs is almost the same despite the differences in size. The DC uptake of small NPs is lower than for the larger NPs, but the effect of DC activation by NPs is high in the small sizes. The DC activation is significantly affected by the size of the NPs, which suggests that not only the uptake process of the NPs, but also the surface interactions between the NPs and DCs, is important for the induction of DC maturation. The precisely size‐controllable γ‐PGA–Phe NPs have significant potential as an antigen carrier and vaccine adjuvant. These results should provide guidelines for adjuvant design in the development of an effective vaccine.