Phase behavior in liquid crystallization for diblock copolymers consisting of rubbery amorphous and side-chain liquid crystalline components

Phase behavior in liquid crystallization was studied for a series of liquid crystalline (LC) diblock copolymers consisting of rubbery amorphous and side-chain liquid crystalline components, poly(n-butyl acrylate) (PBA) and poly[11-(4′-cyanophenyl-4″-phenoxy)undecyl acrylate] (PLC), respectively, using a time-resolved small-angle X-ray scattering (SAXS) techniques, DSC and polarized optical microscopy (POM). The block copolymers used had three kinds of copolymer compositions, 44, 20 and 15 wt% of PLC compositions (BLC44, BLC20 and BLC15, respectively). BLC44 showed a smectic liquid crystalline structure. In the process of liquid crystallization for BLC44, the SAXS peak due to the microphase separation structure existing before liquid crystallization was changed continuously to be at a smaller angular side, and at almost the same time, a new peak appeared at a further smaller angular side and developed. The former peak disappeared with the development of liquid crystallization. The behavior of these SAXS peaks suggests that the microphase separation structure was changed discretely at the transition from isotropic to smectic and that two phases coexist in the early stage of the liquid crystallization. The coexistence of two peaks in the early stage of the liquid crystallization corresponded to the POM observation. In the isotropization process, coexistence of two phases was not observed. For BLC20 exhibiting a cylindrical structure in both isotropic and liquid crystalline states, the liquid crystalline structure was not smectic but probably nematic, and the spacing was changed continuously in liquid crystallization. No liquid crystallization was observed in SAXS, POM and DSC for BLC15. The orientation of smectic layers within lamellar domains was investigated using 2D-SAXS images. The smectic layer was aligned perpendicularly to the lamellar interface.     

Fabrication of aluminium foams from powder by hot extrusion and foaming

In order to produce aluminium foams for light-weight and energy absorbing structures of automobiles, a method for fabricating aluminium foam from powder mixed with a foaming agent by using a mould is proposed. The method consists of four sequential processes: powder compacting, extruding, foaming and moulding. In the experiment for fabricating aluminium foam from powder, the conditions of powder extrusion and foaming by the heated die are determined from the density of the aluminium foams made without a mould. The experimental results show that the relative density of the aluminium foam made under appropriate conditions is 0.22. In moulding of aluminium foam, a stainless steel pipe is used as a mould and the cylindrical aluminium foam is produced by filling into the pipe mould. The distribution of relative density within the aluminium foam bar is in a range of 0.2–0.3 by rapid cooling of the pipe. To examine the ratio of deformation energy to weight of the pipe including the aluminium foam, a compression test using a press is carried out. The deformation energy of the pipe can be increased with aluminium foam filled by the proposed method.     

Features of Rotating Stall Cell in a Diagonal Flow Fan（in Case of Mid-loading Rotor）

The structure and behavior of rotating stall cell were experimentally clarified in a diagonal flow fan. The specific-speed of the fan was 1140 (r/min, m3/min, m), and the total pressure-rise coefficient at design flow-rate was 0.345. The static pressure on outer casing wall and the total pressure at rotor inlet and outlet were measured using a high response pressure transducer. The measured data were processed by the use of DPLA technique, and the structure and behavior of rotating stall cell were obtained. As a result, the stall cell extent for circumferential and spanwise direction and the pressure distributions inside stall cell were clarified. The details of stall cell propagation were also shown.     

A 7 ns 1 Mb BiCMOS ECL SRAM with shift redundancy

A 7-Mb BiCMOS ECL (emitter coupled logic) SRAM was fabricated in a 0.8 μm BiCMOS process. An improved buffer with a high-level output of nearly V_CC is adopted to eliminate the DC current in the level converter circuit, and the PMOS transistor has a wide operating margin in the level converter. The configurable bit organization is realized by using a sense-amplifier switch circuit with no access degradation. A wired-OR demultiplexer for the ×1 output, having the same critical path as the ×4 output circuit, allows for the same access time between the two modes. The ×1 or ×4 mode is electrically selected by the external signal. A simplified programming redundancy technology, shift redundancy, is utilized. Address programming is performed by cutting only one fuse in the shift redundancy. The RAM operates at the ECL-10K level with an access time of 7 ns. and the power dissipation at 50 MHz is 600 mW for the × mode     

Effectiveness of polyamidoamine dendrimers modified with tripeptide growth factor, glycyl-L-histidyl-L-lysine, for enhancement of function of hepatoma cells

Cationic polyamidoamine dendrimers are known to be highly branched cascade polymers. Tripeptide growth factor, glycyl-L-histidyl-L-lysine (GHK), was employed as a ligand for activation or attachment of cells from a rat hepatoma cell line, H4-H-E-C3, and immobilized at the terminus of the dendrimer (GHK-dendrimer) to develop a suitable surface for use as a culture substratum in the bioartificial liver support system (BAL). The growth of cells was inhibited by increasing the number of generations of GHK-dendrimers. On the other hand, urea synthesis and lidocaine clearance of the cells adhered on fifth generation GHK-dendrimers were enhanced much more than on first generation GHK-dendrimers. GHK was shown to act as a growth inhibitor and an activator of hepatoma cells. These properties of GHK are advantageous for the utilization of hepatoma cells in BAL. Ligand-modified dendrimers are very promising for the creation of a high-performance substratum for cell culture and high performance bioartificial organs, as well as for high-performance bioartificial liver systems. GHK may have the potential to be a highly useful ligand.     

Development of a 385–500 GHz Sideband-Separating Balanced SIS Mixer

A submillimeter (385–500 GHz) low-noise sideband-separating balanced SIS (Superconductor Insulator Superconductor) mixer (Balanced 2SB mixer) with high IRR (Image Rejection Ratio) has been successfully developed, whose SSB (Single SideBand) noise temperature is ～ 200 K (10hf/k) with an image rejection ratio of ≥?～10 dB. Balanced mixers have become a promising technology which would break through the limitation especially in terahertz receivers and heterodyne arrays. However, though there are examples in microwave with relatively worse noise performance, submillimeter and terahertz balanced mixers have rarely been developed in spite of their astronomical importance. The developed balanced 2SB mixer is not only the first one demonstrated at submillimeter frequency range, but also has very low noise, high IRR, wide detectable frequencies (385–500 GHz), and a flat IF output spectrum. The balanced 2SB mixer is composed of three RF hybrids, four DSB (Double SideBand) mixers, two 180° IF hybrids, and an IF quadrature hybrid. Several important performance indicators such as noise temperature, IRR, required LO (Local Oscillator) power, and IF spectra were measured. The measured LO power required for the balanced 2SB mixer was typically ~ 14 dB less than that of the single-ended mixers.     

Interaction between zinc dialkyldithiophosphate and amine

This paper reports work on complex formation from ZDP and various aliphatic amines, and their equilibrium states in oil, adsorptivities and antiwear properties are investigated. Complex formation from ZDP and amine was proven by isolation and identification of solid crystals, and various complexes were found from mono- and diamines. The complex from monoamine has lower adsorptivity than free ZDP, while the poorer adsorptivity of ZDP/monoamine complex makes its antiwear property worse.     

Investigation of radiation-induced surface activation effect in austenitic stainless steel under ultraviolet and γ-ray irradiations

The radiation-induced surface activation (RISA) effect will be applied to the core design in supercritical light water reactor (SCWR) in order to achieve a high performance with excellent economy and safety. The purpose of the present study is to investigate the RISA effect in the candidate fuel cladding materials in SCWR such as PNC1520. The change of weldability due to RISA effect and the related microstructure analysis were performed in oxidized PNC1520 and 304 stainless steel with various oxidization periods. The phases contained in the surface oxide layer of the present specimen were identified as Fe₂CrO₄, γ-Fe₂O₃, and Fe₂O₃. The lifetime of 13.8 days for wettability improving factor was confirmed in the ultraviolet (UV) irradiation. Meanwhile, the long life of 13.8 days and short life of 0.8 days for wettability improving factors were identified in the γ-ray irradiation. Based on the fact that the band gap energies of Fe₂CrO₄, γ-Fe₂O₃, and Fe₂O₃ were, respectively, 2.1, 2.0, and 2.2 eV, and the photo energies of UV and γ-ray irradiation were 4.48 eV and 13.3 MeV, it is therefore clarified that the hydrophilization on the oxide layer is ascribed to the RISA effect.     

Microorganisms in landfill bioreactors for accelerated stabilization of solid wastes

Landfill bioreactors (LBRs) with management of leachate and biogas have presented numerous advantages such as accelerated stabilization of solid wastes, reduced amount of leachate, and in situ leachate treatment. Such advantages have minimized environmental risks, have allowed extension of the useful life of the landfill site, and have fostered cost reduction. LBRs of three types have been developed using both anaerobic and aerobic modes: anaerobic, aerobic, and hybrid. Microorganisms in landfills cause various reactions related with organic fractions and heavy metals. Such functions have been stimulated in LBRs by recirculation of leachate with or without aeration. To date, most studies of microorganisms in LBRs have analyzed bacteria and archaea based on 16S rRNA genes and have analyzed fungi based on 18S rRNA genes from a taxonomical viewpoint. Indicator genes for specific functions in LBRs such as nitrification, denitrification, and methane production have also been monitored. The population dynamics of microorganisms in LBRs have been partially clarified, but the obtained data remain limited because of highly heterogeneous features of solid wastes inside LBRs. Systematic monitoring of microorganisms should be established to improve LBR performance.     

Two-step migration of particles in evaporating bimodal suspension films at high Peclet numbers

During the drying of bimodal colloidal suspensions containing particles of various sizes, smaller particles preferentially migrate to the top surface under particular drying conditions, leading to undesirable drying defects in batteries and in other coating applications. Despite extensive previous studies, the migration mechanism is far from being understood because few in situ observations are available to support the hypotheses. To remedy this, we use real-time photoluminescence (PL) microscopy to investigate the migration of small fluorescent latex particles co-dispersing with large nonemissive latex particles. Comparing the measured PL intensity with that predicted by a model allows us to determine the quantity of small particles near the evaporating surface. The results reveal that the fluorescent particles segregate in two steps: The primary segregation occurs early in the evaporation stage, whereas the secondary stepwise migration occurs when the air–liquid interface invades the particle consolidation layer. The latter migration is attributed to the flow-induced motion of small particles that move through interstitial spaces between large particles.