Robust backward adaptive formant prediction for speech coder

To improve the error performance of speech coders, an adaptation method for the backward adapted formant predictor is proposed. The filtered residual signal is used instead of the reconstructed output signal as the input to an adaptation of the formant predictor. The performance of the filtered-residual driven adaption method in the noise free channel is as good as that of conventional output driven adaptation. Moreover, the new adaptation method maintains the same robustness to channel errors as residual driven adaptation     

The microstructures of laser-alloyed Ni-Ta surface layers

Evaporated thin tantalum films on single and polycrystalline nickel have been laser surface alloyed using either continuous-wave CO₂ or Q-switched Nd-YAG radiation. In the case of the continuous-wave laser, surface alloys contain amorphous tantalum-rich regions, intermediate polycrystalline bands of TaNi, and an underlying Ni(Ta) solid solution. In the Q-switched laser case, a much more laterally uniform amorphous phase with approximately equal atomic fractions of nickel and tantalum is found, with little evidence of polycrystalline intermetallics.In situ annealing with the electron beam of the microscope results in formation of microcrystallites, predominantly nickel.     

The Metaflow architecture

The Metaflow architecture, a unified approach to maximizing the performance of superscalar microprocessors, is introduced. The Metaflow architecture exploits inherent instruction-level parallelism in conventional sequential programs by hardware means, without relying on optimizing compilers. It is based on a unified structure, the DRIS (deferred-scheduling, register-renaming instruction shelf), that manages out-of-order execution and most of the attendant problems. Coupling the DRIS with a speculative-execution mechanism that avoids conditional branch stalls results in performance limited only be inherent instruction-level parallelism and available execution resources. Although presented in the context of superscalar machines, the technique is equally applicable to a superpipelined implementation. Lightning, the first implementation of the Metaflow architecture, which executes the Sparc RISC instruction set is described     

Cigarette smoking and quitting behaviors among unemployed adults in the United States.

Little is known about factors associated with smoking among the unemployed. This study estimated the prevalence of smoking and examined sociodemographic factors associated with current, former, and successful quitting among unemployed adults aged 18-64. Cross-sectional data on 13,480 participants in the 1998-1999 and 2001-2002 Tobacco Use Supplements to the Current Population Surveys were analyzed. Multivariate logistic regression analyses were used to examine factors associated with study outcomes (current vs. never, former vs. current, successful quitter vs. other former smoker). Among the unemployed, 35% were current smokers and 13% were former smokers. Of the former smokers, 81% quit successfully for at least 12 months. Participants with family incomes of less than US$25,000 were more likely than those with incomes of $50,000 or more to currently smoke (OR=2.13, 95% CI=1.85-2.46). Service workers and blue-collar workers were less likely than white-collar workers to report former smoking. Participants unemployed for 6 months or more were twice as likely as those unemployed for less than 6 months to quit successfully (OR=2.05, 95% CI=1.07-3.95). Unemployed blue-collar workers had a greater odds ratio of successfully quitting than white-collar workers (OR=1.83, 95% CI=1.17-2.87). Smoking rates were high among the unemployed, and quitting behaviors varied by sociodemographic factors and length of unemployment. Studies are needed to examine the feasibility of cessation interventions for the unemployed.     

Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Electron transport in InGaO3(ZnO)m (m=integer) studied using single-crystalline thin films and transparent MISFETs

We have investigated the characteristics of transparent metal-insulator-semiconductor field-effect transistors (MISFETs) fabricated using InGaO₃(ZnO)_m (m=integer) single-crystalline thin films as n-channel layers and amorphous alumina as gate insulator films. The MISFETs exhibit good characteristics such as insensitivity to visible light illumination, off-current as low as ∼1 nA with a positive threshold voltage of ∼3 V and on/off current ratio of 10⁵. The field-effect mobility increased from ∼1 to ∼10 cm² (V s)⁻¹ as the m-value increased. Room temperature Hall mobility also increased. However, unexpectedly these values were lower than the field-effect mobility. It is explained by existence of shallow localized state in the homologous compounds.     

Effects of nondensifying inclusions on the densification and microstructure of zinc oxide matrix composites

The densification and microstructure development of ZnO containing Zn₇Sb₂O₁₂, ZrO₂, and aggregated ZnO were investigated to elucidate the effect of nondensifying inclusions on the sintering of ceramic/ceramic composites. The inclusion retarded the densification, and the degree of retardation was found to depend on the chemical species of inclusion; Zn₇Sb₂O₁₂ had the largest effect, followed by ZrO₂ and then aggregated ZnO last. The experimental results for aggregated ZnO was explained by the theory which predicts the generation of backstresses. The backstresses give a less significant effect on the densification. For Zn₇Sb₂O₁₂ and ZrO₂, the microstructure of the matrix varied with distance from an inclusion particle; much porosity was observed in the region surrounding the inclusion. Circumferential voids, which are responsible for the suppression of densification, form during the initial stage of sintering. Inclusion particles generate an anchoring effect which retards the densification of the matrix immediately surrounding the inclusion particle during the intermediate stage.Supported by the Inamori Foundation.     

The effects of R-75,317 on antiglomerular basement membrane glomerulonephritis in rats

Platelet-activating factor (PAF) is a potent inflammatory mediator which is released by various inflammatory cells and produced by certain tissues, including the kidney. PAF has been shown to increase glomerular permeability to protein and to decrease glomerular filtration rate (GFR) by contracting mesangium. On the basis of these observations, it has been suspected that PAF may play a role as mediator of glomerular damage in glomerular nephritis. To examine this possibility, we studied the effects of a specific PAF antagonist, R-75,317, on the development of an experimental model of anti-glomerular basement membrane (anti-GBM) glomerulonephritis. Glomerulonephritis was initiated by injecting rabbit anti-rat GBM serum into rats. Proteinuria gradually developed after serum injection, plateaued at week 2, and remained at the high level of week 2 throughout the experimental period (6 wk). Chronic treatment with R-75,317 (10 mg/kg/day i.p.) tended to delay the onset of proteinuria and significantly accelerated the recovery phase. Creatinine clearance (Ccr) fell to 40% at week 3. R-75,317 treatment completely prevented this decline of Ccr. Histological changes in this model (glomerular hypertrophy, proliferation of mesangial matrix and interstitial fibrosis) were also ameliorated by the R-75,317 treatment. The results suggest that PAF may play a role in the development of glomerulonephritis and that PAF antagonists could be used in the treatment of human renal disease. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, May 1989.     

Preparation of SiB4±x and SiB6 plates by chemical vapour deposition of SiCl4 + B2H6 system

SiB_4±x and SiB₆ plates were prepared by chemical vapour deposition (CVD) using SiCl₄, B₂H₆ and H₂ gases under the conditions of deposition temperatures (T _dep) from 1323–1773 K, total gas pressures (P _tot) from 4–40 kPa and B/Si source gas ratio (m _B/Si=2B₂H₆/SiCl₄) from 0.2–2.8. The effects of CVD conditions on the morphology, structure and composition of the deposits were examined. High-purity and high-density SiB_4±x and SiB₆ plates about 1 mm thick were obtained at the deposition rates of 71 and 47 nm s⁻¹, respectively. The lattice parameter, composition and density of CVD SiB_4±x plates were dependent on their non-stoichiometry. The lattice parameter,a, was 0.6325 nm, butc ranged from 1.262–1.271 nm.The B/Si atomic ratio ranged from 3.1–5.0, and the density ranged from 2.39–2.45×10³ kg m⁻³. The CVD SiB₆ plates showed constant values of lattice parameters (a=1.444 nm,b=1.828 nm,c=0.9915 nm), composition (B/Si=6.0) and density (2.42×10³ kg m⁻³), independent of CVD conditions.     

Shear and extensional flow of reinforced plastics in injection molding. I. Effects of temperature and shear rate with bulk molding compound

Capillary flow studies on bulk molding compound (BMC) using an instrumented injection-molding machine are reported. The significance of extensional flow effects with fiber-reinforced materials is emphasized. The extensional flow behavior in converging dies is modeled, and a means of evaluating both extensional and shear viscosity from capillary flow data is proposed. Methods of correcting results for the effect of deformation heating are discussed. The shear and extensional flow behavior of BMC in the temperature region 18 to 58°C can be fitted to a simplified Arrhenius Law.