Deposition of carbon films by electrolysis of a water-ethylene glycol solution

An attempt was made to deposit carbon films by electrolysis of a water-ethylene glycol solution. Carbon plate and an n-type silicon substrate were dipped in the solution and a high d.c. potential was negatively applied on the silicon substrate. Some deposits were observed in the region between the boiling point curve and the line approximately 50 °C below and parallel to the boiling point, when electrolysis was carried out at 1 kV for 6 h. For higher potentials of 1.4–2.0 kV and longer electrolysis of 12 h, some samples showed a broad X-ray diffraction peak and Raman peaks, corresponding to graphitic carbon.     

Model for the potential barrier depth along the grain boundaries of an ultrathin tin dioxide gas sensor

A potential barrier model along the grain boundaries in ultrathin tin dioxide (SnO₂) gas sensors is presented. It is assumed that the negatively charged oxygens are adsorbed only on the grain boundaries. The potential barrier depth is expressed as functions of grain size, donor concentration and surface coverage of adsorbed oxygen ions at the boundaries. A direct consequence is that the conduction electrons are effectively confined in a grain when the film thickness becomes smaller than a critical value. This indicates a drastic increase in resistivity with decreasing film thickness in air, and thus an occurrence of an extremely high gas sensitivity.     

Reduction of Vibration in Concentrated Winding Permanent Magnet Synchronous Motor by Means of Skew Effects of Rotor

Global warming and the problem of successfully incorporating environmental safeguards are promoting the need for a more power‐efficient motor. Therefore, as a driving source, permanent magnet synchronous motors (PMSMs) with concentrated winding are widely used in a variety of fields. However, a PMSM with a concentrated winding generates more vibration than one with a distributed winding because of the radial electromagnetic force. This paper describes the effect of a new skewed rotor on the characteristics of a concentrated winding PMSM. We investigated this effect by three‐dimensional finite element method (3D FEM) analysis and measurement. We also demonstrate that the proposed rotor is effective in reducing the radial electromagnetic force without decreasing motor efficiency. © 2014 Wiley Periodicals, Inc. Electr Eng Jpn, 187(2): 33–43, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22400     

Development of rapid hygrothermal pasteurization using saturated water vapor

We developed a novel rapid hygrothermal pasteurization (RHP) method using saturated water vapor with a dew point of 100 °C. In the present study, the effects of RHP on microbiological quality and quality attributes such as color changes, firmness and ascorbic acid content on many fresh-cut fruits and vegetables (cabbage, cucumber, carrot, cherry tomato, bell pepper, strawberry, pineapple and melon) were investigated. The RHP was performed within a second by free-falling samples through a cylindrical processing chamber filled with steam. The RHP resulted in a 0.7–2.0 log order reduction in the numbers of naturally inoculated mesophilic bacteria. Furthermore, the RHP induced no significant changes in color and firmness of samples, except on the leafy vegetable, cabbage. Ascorbic acid was also retained approximately 80% and above. These results indicate that the RHP is a clean and effective method for decontaminating mesophilic bacteria on fresh fruits and vegetables with minimal changes in quality.Industrial relevanceIn fresh-cut industry, an effective and risk-free decontamination technology is required for use in place of a conventional method, washing by chlorine that can produce carcinogenic chlorinated by-products. In this study, the rapid hygrothermal pasteurization (RHP) method using saturated water vapor was invented and their ability for applying minimal processing was evaluated. The results showed that RHP, without using chemicals, can reduce microorganism load and preserve quality attributes in many kinds of fresh-cut fruits and vegetables. Therefore, RHP could be used as a novel method, which can be generally applicable to fresh-cut fruits and vegetables in the food industry.     

Sputtering of the aqueous solution of TiCI3 and the TiO2 formation

DC-plasma was generated between the substrate and the aqueous solution of TiCI₃ under the reduced pressure. Deposition was carried out for 1 h. The amount of the liquid loss and the morphology of the products were examined. A linear relationship existed between the liquid loss and the input power. The threshold power was 200 Watt, under which no stable discharge was established. The sputtering yield of H₂O molecules was between 100 and 900 at the applied voltages between 600 and 1300 V. TiO₂ thin films of microcrystalline rutile structure were deposited on the quartz glass substrates. On the titanium substrate, thick films of highly 110 oriented rutile structure were produced.     

Wearable vibrotactile systems for virtual contact and information display

This paper presents a development history of a wearable, scalable vibrotactile stimulus delivery system. This history has followed a path from desktop-based, fully wired systems, through hybrid approaches consisting of a wireless connection from the host computer to a body-worn control box and wires to each tactor, to a completely wireless system employing Bluetooth technology to connect directly from the host to each individual tactor unit. Applications for such a system include delivering vibrotactile contact cues to users of virtual environments, providing directional cues in order to increase situational awareness in both real and virtual environments, and for general information display in wearable contexts. Through empirical study, we show that even a simple configuration, such as eight tactors arrayed around the torso, can be effective in increasing situational awareness in a building-clearing task, compared to users who perform the same task without the added cues.     

Silica films with a single-crystalline mesoporous structure

Films of mesoporous materials attract broad interest because of their wide applicability in the fields of optics and electronics. Although many of these films have a regular local porous structure, the structural regularity has not been used practically yet because of difficulties in its control on macroscopic scales. Here, we demonstrate the preparation of mesoporous silica films whose porous structure can be described as a single crystal, that is, a long-range order of cage-like pores is maintained over centimetre scales. These films have a three-dimensional hexagonal (space group P6(3)/mmc) porous structure, and the in-plane arrangement of the pores is strictly controlled by a polymeric substrate surface that has been treated by rubbing. This new class of single-crystalline films with mesoscopic periodic structure is a significant breakthrough in bottom-up nanotechnology, and could lead to novel devices, for example, optics in a soft X-ray region, and quantum electronics.     

Synthesis of nm-sized barium titanate crystallites using a new LTDS method and their characterization

A new LTDS method was established to synthesize nm-sized barium titanate crystallites with particle sizes around 10 nm. This LTDS method was the following two features, i.e., (1) a heat of neutralization in a neutralization reaction between strong acid and base can be used as a driving force for a formation of barium titanate, and (2) barium titanate crystallites can be directly synthesized from Ti and Ba ions, not via intermediates. Therefore, using the LTDS method, it can be expected that there is no minimum limit in particle sizes, and also no contamination in barium titanate crystallites. At first, optimum conditions for a formation of barium titanate were screened at various reaction temperatures and Ba/Ti atomic ratios in the starting materials. As a result, the formation of barium titanate was found at higher reaction temperatures than 50°C and higher Ba/Ti atomic ratios than 5. Under a constant temperature, particle sizes decreased with increasing Ba/Ti atomic ratios while under a constant Ba/Ti atomic ratio, particle sizes were independent of reaction temperatures. Finally, barium titanate crystallites with particle sizes below 10 nm were first prepared. These particles were also characterized using various methods.     

Sumi-Nagashi: adding corporeality and tactile sensation to digital painting

The application lets people experience the feeling - literally and physically - that they are digitally painting in a manner derived from the Japanese traditional streaming art of Sumi-Nagashi. The Proactive Desk desk-style force feedback device makes this experience possible. Dynamic visual and haptic changes in colors and shapes arouse a new inspiration in painters.