Fast modular multiplications based on precomputations with lessmemory

A fast modular multiplication method based on precomputation is proposed for use in public-key cryptosystems. The proposed method can compute the Montgomery reduction TR¹ mod N only through additions. Furthermore, this is 6.4 times faster than the Montgomery method implemented in modular reduction with a 512 bit modulus when 2.1 MB of memory is used. This memory size is also only 1/4 of that required in the method proposed by Takenaka et al     

Modified quadratic discriminant functions and the application to chinese character recognition

Issues in the quadratic discriminant functions (QDF) are discussed and two types of modified quadratic disriminant functions (MQDF1, MQDF2) which are less sensitive to the estimation error of the covariance matrices are proposed. The MQDF1 is a function which employs a kind of a (pseudo) Bayesian estimate of the covariance matrix instead of the maximum likelihood estimate ordinarily used in the QDF. The MQDF2 is a variation of the MQDF1 to save the required computation time and storage. Two discriminant functions were applied to Chinese character recognition to evaluate their effectiveness, and remarkable improvement was observed in their performance.     

Removal of nitrogen oxides from air by chemicals-impregnated carbons

Fixation of nitrogen oxides (NO_x) in air onto granular activated carbon impregnated with chemicals was attempted to improve removal efficiency of NO_x by activated carbon adsorption. Nitric oxide (NO) and nitrogen dioxide (NO₂), were tried to remove by a flow test. Fixed-bed adsorption breakthrough curves were obtained when some kinds of carbon were used. The amount adsorbed of NO₂ changed with the amount and kinds of metallic salts impregnated. Chemicals-impregnated carbons were prepared from a commercial activated carbon. Among obtained carbons, the one which showed the highest selectivity for NO_x was chosen, and its performance with the change in humidity was determined. Removal mechanism of NO₂ was estimated, and the carbon impregnated with potassium hydroxide was found to be superior to any other carbon tested. The amount of the adsorbed NO and that produced by the reduction of NO₂ were determined from the breakthrough curves.     

1.3-/spl mu/m AlGaInAs strain compensated MQW-buried-heterostructure lasers for uncooled 10-gb/s operation

We have successfully fabricated 1.3-/spl mu/m AlGaInAs strain-compensated multiple-quantum-well (MQW) buried-heterostructure (BH) lasers by narrow-stripe selective metalorganic vapor-phase epitaxy. Based on the optimization of AlGaInAs strain compensated MQW and the Al-oxidation-free BH process, we obtained a low-threshold current of 12.5 mA and a relaxation frequency of more than 10 GHz at 85/spl deg/C for Fabry-Perot lasers. For distributed feedback lasers, we demonstrated a 10-Gb/s operation and transmission of over 16 Km for a single mode fiber at 100/spl deg/C. Furthermore, a record-low 25.8-mA/sub p-p/ modulation current for a 10-Gb/s modulation at 100/spl deg/C was demonstrated with shorter cavity and high grating-coupling coefficient. A median life of more than 1/spl times/10/sup 5/ h at 85/spl deg/C was estimated after an aging test of over 5000 h for these lasers. These superior characteristics at high temperatures were achieved by the combination of the high differential gain of AlGaInAs strain compensated MQW and the BH structure.     

Soybean and milk proteins modified by transglutaminase improves chicken sausage texture even at reduced levels of phosphate

Consumer demands for poultry processed meats have increased due to low fat content. In this experiment, chicken sausages were manufactured with various biopolymers prepared from soybean protein, casein, whey protein isolate (WPI), mixtures of soybean protein and casein, and soybean protein and WPI. The extent of various biopolymer formations was determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and high performance liquid chromatography. Cross-linking soybean protein and casein or WPI by transglutaminase provided biopolymers with improved heat stability and emulsifying property. Shear force of chicken sausages were measured to evaluate the addition of biopolymer on the hardness in the presence of 0.05 or 0.2% sodium tripolyphosphate (STPP). The texture of chicken sausages was improved by the addition of such biopolymers even in the presence of 0.05% STPP. These results suggested that chicken sausage texture was improved by the formation of network structures that contribute to hardness of sausage gels with the addition of biopolymers. Thus, addition of biopolymers in the manufacture of chicken sausages may permit reduction in phosphate content without loss in texture.     

G1 accumulation caused by iron deprivation with deferoxamine does not accompany change of pRB status in ML-1 cells

In hypertension, several factors disturb coronary circulation and the metabolic reserve of the heart. This study was undertaken to test whether in hypertensive patients global and regional left ventricular (LV) function is related during exercise to the presence of significant coronary stenosis and whether lowering of coronary perfusion pressure through rapid normalization of the diastolic pressure may modify the dynamics of the left ventricle. Thirty-five patients with mild to moderate hypertension undergoing coronary angiography for the evaluation of chest pain were included in the study; upright bicycle exercise echocardiography tests were performed without therapy and 1 day later 1 h after sublingual administration of nifedipine. LV ejection fraction and regional wall motion scores were evaluated and compared at baseline, peak exercise, immediate postexercise, and recovery phases in each test through digital on-line storing of echocardiographic images. Twenty-one patients had normal coronary arteries (group 1) and 14 significant coronary stenoses (group 2); age, gender, heart rate, blood pressure, left ventricular diameter and mass index, and ejection fraction were similar in the two groups. At peak exercise LV ejection fraction slightly increased in group 1, whereas it slightly decreased in group 2 (both during the test without therapy and after nifedipine administration). All patients in group 1 had normal left ventricular wall motion during exercise; 13 of 14 patients in group 2 had LV wall motion abnormalities at peak exercise. Nifedipine did not produce any effect on LV regional wall motion in group 1, but it induced significant changes in LV regional wall motion in seven patients in group 2. Changes in LV wall motion between the two test groups were related to the number of the stenotic coronary vessels: the normal exercise test before and after therapy and the two normalized tests after nifedipine administration were in fact observed in patients with one-vessel disease, whereas worsening or changes in the site of ischemia were observed only in patients with multivessel disease. Regional and global left ventricular dynamics during exercise is mainly dependent on the existence of significant coronary artery disease. Rapid decrease of blood pressure does not alter the regional dynamics of the left ventricle during exercise in patients without coronary artery disease, but it may induce normalization, worsening, or changes in the site of wall motion abnormalities in hypertensives with significant coronary stenoses.     

Applications of wear-resistant thick films formed by physical vapor deposition processes

Several physical vapor deposition processes are being developed in Japan to obtain hard refractory carbide and nitride thick films. A good example is the process for producing TiC and/or TiN by (1) reactive evaporation, (2) reactive r.f. ion plating, (3) reactive sputtering, (4) activated reactive evaporation with a probe electrode and a grounded substrate or (5) activated reactive evaporation with a positive-biased or a.c. modulated substrate (low pressure plasma deposition, d.c. or a.c.). Thick films of chromium, chromium carbide and chromium nitride deposited on steel sheets by (6) a hollow cathode discharge process are being investigated for wear applications.This paper describes the examination of such films formed by processes (4)–(6). Wear resistance is correlated to microhardness, X-ray diffraction diagrams, scanning electron microscopy observations and scratch test results.TiC-coated WC-Co throw-away tool tips, for example, prepared in suitable deposition conditions show marked improvements: $\text{1}\text{20}$ to $\text{1}\text{30}$ on crater depth and $\text{1}\text{4}$ to $\text{1}\text{5}$ on flank wear compared with uncoated tips after 15 min of lathe machining a Ni-Cr-Mo steel SNCM-8 rod at a feed rate of 0.4 mm rev^-1, with a depth of cut of 0.5 mm and at a machining speed of 234-158 m min^-1. The hardness, color and crystal structure are reported for TiN-coated sheets.The features of chromium together with its carbide and nitride films deposited by a hollow cathode discharge process for wear applications are also described.     

Highly Reproducible and Regulated Conductance Quantization in a Polymer‐Based Atomic Switch

A detailed understanding of the conductance quantization and resistive switching phenomena in redox‐based memories is crucial for realizing atomic‐scale memory devices and for finding the adequate design principles on which they can be based. Here, the emergence of quantized conductance states and their correlation with resistive switching characteristics in polymer‐based atomic switches are investigated using combinations of current–voltage measurements and first‐principles density functional theory (DFT) simulations. Various conductance states, including integer and half‐integer multiples of a single atomic point contact and fractional conductance variations, are observed in an Ag/polyethylene oxide/Pt device under sweeping of bias voltage. Moreover, highly controllable and reproducible quantized conductance behaviors by tuning the voltage sweep rate and the sweep voltage range, suggesting well‐controlled formation of the atomic point contact, are demonstrated. The device also exhibits longer retention times for higher conductance states. The DFT simulations reveal the transmission eigenstate of geometrically optimized atomic point contact structures and the impact of the atomic configurations and structural stability on the conductance state, which also explains their resistive switching behaviors. The well‐defined, multiple quantized conductance states observed in these polymer‐based atomic switches show promise for the development of new multilevel memory devices.