THz Direct Detector and Heterodyne Receiver Arrays in Silicon Nanoscale Technologies

Journal of Infrared, Millimeter, and Terahertz Waves - The main scope of this paper is to address various implementation aspects of THz detector arrays in the nanoscale silicon technologies...     

Hydroformylierung einfach und mehrfach ungesättigter Fettstoffe mit heterogenisierten Cobaltcarbonyl- und R

Hydroformylation of mono and multiple unsaturated fatty substances with heterogenized cobaltcarbonyl and rhodiumcarbonyl catalysts. Heterogenized cobalt and rhodiumcarbonyl catalyst systems can be used for the hydroformylation of mono and polyunsatured fatty substances in a technically simple and satisfying manner to useful chemical intermediates. The used solid tert. phosphane complex ligands have a silicate matrix and therefore they are also suitable for the cobalt catalyzed hydroformylation which is best performed at temperatures of 160–180^oC. The cobalt catalyzed reaction gives with polyunsaturated fatty substances almost only products with monofunctionalized fatty acid chains. Whereas, the rhodium catalyzed reaction gives with linolic acid compounds inhomogeneous mixtures of mono- and diformyl derivatives of these fatty substances. The heterogenized rhodium carbonyl catalyst systems therefore seem to be more suitable for the hydroformylation of monounsaturated compounds. This is also true for rhodiumcarbonylsupported aqueous phase-catalysts which give likewise mixtures of mono and diformyl derivatives in the hydroformylation of polyunsaturated fatty substances. In batch process after the complete conversion of the olefin and reduction of the CO/H₂-pressure the loss of catalyst metal from the support is negligible and in most cases below the detection limit (<1 ppm).     

Religious Participation, Interleukin-6, and Mortality in Older Adults.

This study prospectively examined the relationship between religious attendance, interleukin-6 (IL-6) levels, and mortality rates in a community-based sample of 557 older adults. Attending religious services more than once weekly was a significant predictor of lower subsequent 12-year mortality and elevated IL-6 levels (> 3.19 pg/mL), with a mortality ratio of .32 (95% confidence interval [CI] = 0.15,0.72; p     

A collaborative filtering framework based on both local user similarity and global user similarity

Collaborative filtering as a classical method of information retrieval has been widely used in helping people to deal with information overload. In this paper, we introduce the concept of local user similarity and global user similarity, based on surprisal-based vector similarity and the application of the concept of maximin distance in graph theory. Surprisal-based vector similarity expresses the relationship between any two users based on the quantities of information (called surprisal) contained in their ratings. Global user similarity defines two users being similar if they can be connected through their locally similar neighbors. Based on both of Local User Similarity and Global User Similarity, we develop a collaborative filtering framework called LS&GS. An empirical study using the MovieLens dataset shows that our proposed framework outperforms other state-of-the-art collaborative filtering algorithms.     

Investigations into the influence of the tup velocity and the heat treatment on the Dynamic Fracture Toughness of inconel 625

Experiments were performed with an instrumented impact machine using different drop heights, on the nickel base alloy Inconel 625 in the as-received state and after heat treatment for about 3.6 Ms (1000 h) at 923 K (650°C). The absorbed impact energy can be obtained either by the direct dial reading, by the integration of the load versus load point displacement diagram or by the integration of the load versus time diagram, knowing the initial impact velocity v₀ of the tup. In all cases the agreement was excellent. It is shown that.

• the dynamic fracture toughness is dependent on the tup velocity v₀ and, as a consequence, on the total energy of the hammer at the different drop heights.
• defining a dynamic stress σ from the velocity dependence of the fracture toughness, the stress σ is higher for the embrittled material – a tendency verified by tensile tests.
• the dynamic fracture toughness can be correlated with the absorbed impact energy up to the load maximum for the heat treated material while the as-received material exhibits no such dependence.

The change in the tup velocity during the impact process is only small for this type of material.     

Incorporation of polyfluorenes into poly(lactic acid) films for sensor and optoelectronics applications

Films of neat and plasticized biodegradable poly(lactic acid) (PLA) matrices containing anionic conjugated polyelectrolytes, poly[9,9‐bis(4‐phenoxybutylsulfonate)]fluorene‐2,7‐diyl‐alt‐arylenes, with 1,4‐phenylene and 4,4″‐p‐terphenylene, respectively, as arylene groups or a neutral poly(9,9‐dialkylfluorene) for comparison were prepared by solution casting. These films were characterized using differential scanning calorimetry, thermogravimetry, scanning electron microscopy and fluorescence spectroscopy. In addition, the effects of plasticizer on the thermal properties and the oxygen permeability of the PLA films were measured through the oxygen transmission rate. Results show that it is possible to obtain thin, optically transparent and luminescent films with potential in oxygen sensing, exhibiting good thermal and photochemical stability. At high polyelectrolyte content, evidence is found for phase separation and aggregate formation and it is no longer possible to obtain completely homogeneous films. The possibility of incorporating the cationic metal complex tris(2,2′‐bipyridyl)ruthenium(II) into plasticized PLA films containing conjugated polyelectrolytes for dual‐wavelength ratiometric luminescence sensing is also discussed. Copyright © 2012 Society of Chemical Industry     

Enhancement in crystallinity of poly(3-hexylthiophene) thin films prepared by low-temperature drop casting

Low-temperature casting of high molecular weight (HMW > 40 kDa) regioregular poly(3-hexylthiophene) (P3HT) is demonstrated to yield highly crystalline P3HT thin films with well defined and preferentially edge-on oriented [(100) contact plane] nanocrystallites on the pure and silanized Si/SiO₂ substrates. Transmission electron microscopy and X-ray diffraction provide evidence for the increase in preferential edge-on orientation of P3HT-conjugated backbone while decreasing the film preparation temperature below room temperature. The optimum growth temperature is about −12°C for the given concentration (2 mg/mL in CHCl₃). The reduced evaporation rate of the solvent results in a better selection of the thermodynamically stable orientation of nanocrystallites onto the substrate. The degree of preferential orientation and size of the crystallites can be further increased on n-octadecyltrichlorosilane-treated SiO₂ substrates as well as by annealing the films at 200°C for 1 h. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Insect adhesion on rough surfaces: analysis of adhesive contact of smooth and hairy pads on transparent microstructured substrates

Insect climbing footpads are able to adhere to rough surfaces, but the details of this capability are still unclear. To overcome experimental limitations of randomly rough, opaque surfaces, we fabricated transparent test substrates containing square arrays of 1.4 µm diameter pillars, with variable height (0.5 and 1.4 µm) and spacing (from 3 to 22 µm). Smooth pads of cockroaches (Nauphoeta cinerea) made partial contact (limited to the tops of the structures) for the two densest arrays of tall pillars, but full contact (touching the substrate in between pillars) for larger spacings. The transition from partial to full contact was accompanied by a sharp increase in shear forces. Tests on hairy pads of dock beetles (Gastrophysa viridula) showed that setae adhered between pillars for larger spacings, but pads were equally unable to make full contact on the densest arrays. The beetles'' shear forces similarly decreased for denser arrays, but also for short pillars and with a more gradual transition. These observations can be explained by simple contact models derived for soft uniform materials (smooth pads) or thin flat plates (hairy-pad spatulae). Our results show that microstructured substrates are powerful tools to reveal adaptations of natural adhesives for rough surfaces.