Theoretical estimation of dielectric loss of oxide glasses using nonequilibrium molecular dynamics simulations

To theoretically explore amorphous materials with a sufficiently low dielectric loss, which are essential for next-generation communication devices, the applicability of a nonequilibrium molecular dynamics simulation employing an external alternating electric field was examined using alkaline silicate glass models. In this method, the dielectric loss is directly evaluated as the phase shift of the dipole moment from the applied electric field. This method enabled us to evaluate the dielectric loss in a wide frequency range from 1 GHz to 10 THz. It was observed that the dielectric loss reaches its maximum at a few THz. The simulation method was found to qualitatively reproduce the effects of alkaline content and alkaline type on the dielectric loss. Furthermore, it reasonably reproduced the effect of mixed alkalines on the dielectric loss, which was observed in our experiments on sodium and/or potassium silicate glasses. Alkaline mixing was thus found to reduce the dielectric loss.     

An optically clocked transistor array with dual serial-to-parallel and parallel-to-serial conversion capability for optical label swapping

We propose an optically clocked transistor array optoelectronic integrated circuit (OEIC) for both serial-to-parallel and parallel-to-serial conversion (demux/mux), enabling an interface between high-speed asynchronous burst optical labels and CMOS circuitry for optical label swapping. Dual functionality of the OEIC reduces size, power, and cost of the optical label swapper. The capability for greater than 20-Gb/s conversion operation is demonstrated.     

Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding

The effect of Zr on reduction of hardness and microstructure in an FS weld of equal channel angular-pressed Al alloy was investigated. Zr addition to Al suppressed dynamic recovery in the thermomechanically affected zone and enabled retention of the high hardness of the ECA-pressed material throughout the weld.     

Cholesteryl ester compounds containing alkyl branched acyl groups — their preparations,properties and applications

Cholesterol having a reactive hydroxyl group at C₃-position can react with fatty acids to give the corresponding cholesteryl esters. Most of the natural cholesteryl esters consist of straight alkyl chain fatty acids with a high melting point. In oleochemistry it is well known that alkyl branched fatty acids, which are derived from petroleum or the fat and oil industry, have low melting points (mp.) and are chemically more stable if they are saturated acids. We designed alkyl branched fatty acid cholesteryl esters by means of common esterification and found some esters having a low mp. (mostly as a liquid). They had no irritative effect on both animal and human skin. They showed characteristic emulsification properties, namely the formation of either O/W or W/O emulsion coexistence together with other lipid components. Applying them onto human skin, they were able to penetrate towards the stratum corneum and improve the water-retaining ability and the barrier function of the stratum corneum. Based on these properties we have been applying the alkyl branched fatty acid cholesteryl ester, especially the methyl branched isostearic acid cholesteryl ester (IS-CE), to a shampoo and a rinse as hair cosmetics, skin care cosmetics and bath-additive products in the past decade.     

The motion capturing of female divers under water and the trial production of motion viewers for developing a virtual diving experience learning system

The virtual diving experience learning system of “Ama”, Japanese traditional female divers, has been developed to simulate how divers move in a virtual space using the diving interface and utilizing an accelerometer and a gyroscope. This interface not only detects the diving motion but also outputs the movement. Diving motion is shown in the ways of hand motion while standing. Although this makes it possible for a learner to understand the divers’ actions more clearly, this system’s difficulty is in visualizing a divers’ actions including their hands or bodies. Therefore, our study focuses on developing the operation system to reproduce actual ways of Amas’ diving with a virtual human body in a virtual space. First, the motion capture was done in an underwater condition. In the next process, the virtual human body was created. Finally, with the motion viewer, the more vivid actions of the Ama were successfully reproduced much more than in previous attempts. Using this system, the effectiveness of the Amas’ movement learning was confirmed, because a learner practices Amas’ movement.     

Ether lipids based on the glyceryl ether skeleton: Present state,future potential

Lipids from natural sources consist mainly of saponifiable substances, such as glycerides, along with some unsaponifiable lipids, some of which are ether lipids. Typical ether lipids are monoalkyl ethers of glycerin, also called alkyl/alkenyl glyceryl ethers. Alkyl/alkenyl glyceryl ethers have also been reported in marine organisms and in human feces. Several chemical syntheses of such ether lipids have been reported. Typical examples are alkyl glyceryl ether formation by the addition reaction of alkyl glycidyl ether and the telomerization reaction of butadiene with glycerin and a transition metal catalyst. Characteristic chemical structures, such as terpene alkyl glyceryl ethers, archaebacterial macrocyclic ether lipids, and glyceryl ethers of condensed cyclic planar molecules, have been obtained as well. Over the past few decades, industry has shown much interest in the chemistry and application of highly branched fatty acids. For example, isostearyl glyceryl ether (GE-IS) with methyl branching in the middle chain was already known, but it is now prepared at an industrial scale by proprietary alkyl glycidyl ether methods. The characteristic behavior of GE-IS toward water, such as formation of water-in-oil emulsions containing large amounts of water and of liquid crystals, has made it applicable for use in hair and skin-care cosmetics. Based on these studies and considerations, glyceryl ether lipids, which are rarely investigated, may become one of the most important and useful lipids in the industry.     

Mucin-producing tumor of the pancreas: diagnostic value of diffusion-weighted echo-planar MR imaging

It is generally accepted that hemifacial spasm (HFS) and trigeminal neuralgia are caused by compression of the facial nerve (seventh cranial nerve) or the trigeminal nerve (fifth cranial nerve) at the nerve's root exit (or entry) zone (REZ); thus, neurosurgeons generally perform neurovascular decompression at the REZ. Neurosurgeons tend to ignore vascular compression at distal portions of the seventh cranial nerve, even when found incidentally while performing neurovascular decompression at the REZ of that nerve, because compression of distal portions of the seventh cranial nerve has not been regarded as a cause of HFS. Recently the authors treated seven cases of HFS in which compression of the distal portion of the seventh cranial nerve produced symptoms. The anterior inferior cerebellar artery (AICA) was the offending vessel in five of these cases. Great care must be taken not to stretch the internal auditory arteries during manipulation of the AICA because these small arteries are quite vulnerable to surgical manipulation and the patient may experience hearing loss postoperatively. It must be kept in mind that compression of distal portions of the seventh cranial nerve may be responsible for HFS in cases in which neurovascular compression at the REZ is not confirmed intraoperatively and in cases in which neurovascular decompression at the nerve's REZ does not cure HFS. Surgical procedures for decompression of the distal portion of the seventh cranial nerve as well as decompression at the REZ should be performed when a deep vascular groove is noticed at the distal site of compression of the nerve.     

Examination of electrostatic potential distribution across an implanted p-n junction by electron holography

In the manufacture of semiconductor microelectronic devices, a p-n junction is formed usually by implanting a high concentration of impurity into a less heavily doped region and then heat annealing. A Si/Si p-n junction test sample has been made following the above practical process and thinned for electron holographic observation by using argon ion-milling. From the reconstructed phase image, the phase shift induced by potential drop across p-n junction can be seen clearly. To characterize quantitatively this potential drop, the mean inner potential V0 of silicon was measured precisely by electron holographic method. By measuring 25 different crystalline silicon spheres with diameter ranging from 40 to 170 nm, an average result of V0 = 12.16 +/- 0.83 V was obtained. By using this V0 value, a quantitative measurement yields the potential drop approximately 0.70 V, which is reasonably consistent with expected Si/Si junction parameter. The thickness of electric dead layer in depletion region produced from this measuring is approximately 20 nm on each sample surface.     

Photonic A/D conversion using low-temperature-grown GaAs MSM switches integrated with Si-CMOS

By linking the unique capabilities of photonic devices with the signal processing power of electronics, photonically sampled analog-to-digital (A/D) conversion systems have demonstrated the potential for superior performance over all-electrical A/D conversion systems. We adopt a photonic A/D conversion scheme using low-temperature (LT)-grown GaAs metal-semiconductor-metal (MSM) photoconductive switches integrated with Si-CMOS A/D converters. The large bandwidth of the LT GaAs switches and the low timing jitter and short width of mode-locked laser pulses are combined to accurately sample input frequencies up to several tens of gigahertz. CMOS A/D converters perform back-end digitization, and time-interleaving is used to increase the total sampling rate of the system. In this paper, we outline the development of this system, from optimization of the LT GaAs material, speed and responsivity measurements of the switches, bandwidth and linearity characterization of the first-stage optoelectronic sample-and-hold, to integration of the switches with CMOS chips. As a final proof-of-principle demonstration, a two-channel system was fabricated with LT GaAs MSM switches flip-chip bonded to CMOS A/D converters. When operated at an aggregate sampling rate of 160 megasamples/s, the prototype system exhibits /spl sim/3.5 effective number of bits (ENOB) of resolution for input signals up to 40 GHz.     

Information flows among academic disciplines in Japan

An attempt is made to clarify the relationships among disciplines by examining the flow of citation and the migration of scholars in the humanities and social sciences in Japan. The results of both methods are consistent with each other. In humanities and social sciences in Japan, distinct hierarchical relationships are recognized between disciplines offering much information to other disciplines and disciplines obtaining much information from other disciplines.