Photo-Chemically-Deposited and Industrial Cu/ZnO/Al2O3 Catalyst Material Surface Structures During CO2 Hydrogenation to Methanol: EXAFS,XANES and XPS Analyses of Phases After Oxidation,Reduction, and Reaction

Catalysis Letters - Industrial Cu/ZnO/Al2O3 or novel rate catalysts, prepared with a photochemical deposition method, were studied under functional CH3OH synthesis conditions at the set temperature...     

Extranasal Staphylococcus aureus colonization predisposes to bloodstream infections in patients on hemodialysis with noncuffed internal jugular vein catheters

Introduction: Staphylococcal infection of endogenous origin is an important cause of morbidity and mortality in patients who receive hemodialysis (HD). The risk of such infections in nasal carriers of the organism is well defined. Extranasal carriage of the organism at extranasal sites may pose similar risks. Methods: A total of 70 patients about to undergo internal jugular vein catheterization for HD were enrolled in this prospective observational study. Swab cultures were obtained from anterior nares, posterior pharynx, axillae, toe web spaces, and vascular access sites at baseline and 1 week later. A patient was defined as a persistent carrier when the same organism was grown in both samples. Staphylococcus aureus bloodstream infections were assessed by blood and catheter tip cultures over a 90‐day period. Findings: The mean age of the patients was 43.71 ± 16.2 years. Persistent S. aureus carriage at anterior nares, throat, axilla, toe web spaces, vascular access site, and all sites was documented in 27.9%, 11.4%, 40%, 32.9%, 4.3%, and 64.2% of patients, respectively. Fifteen patients developed S. aureus infections. Catheter related S. aureus infections (CRI) were more likely in persistent carriers than nonpersistent carriers with odds ratios (95% CI) of 10.2 (2.8–37.1), 8.6 (1.7–42.2), 17.3 (3.4–86.0), 3.0 (0.9–9.8), and 1.9 (0.2–22.4) for anterior nares, throat, axilla, toe web spaces, and vascular access site carriers, respectively. The probability of developing CRI in persistent S. aureus carriers was 55% compared to none in noncarriers at 90 days (P = 0.04). Discussion: Extranasal S. aureus carriage is as significant a risk factor as nasal carriage for staphylococcal infections in patients on HD through catheters. The study is limited by lack of molecular phenotyping.     

A learning automata-based fault-tolerant routing algorithm for mobile ad hoc networks

Reliable routing of packets in a Mobile Ad Hoc Network (MANET) has always been a major concern. The open medium and the susceptibility of the nodes of being fault-prone make the design of protocols for these networks a challenging task. The faults in these networks, which occur either due to the failure of nodes or due to reorganization, can eventuate to packet loss. Such losses degrade the performance of the routing protocols running on them. In this paper, we propose a routing algorithm, named as learning automata based fault-tolerant routing algorithm (LAFTRA), which is capable of routing in the presence of faulty nodes in MANETs using multipath routing. We have used the theory of Learning Automata (LA) for optimizing the selection of paths, reducing the overhead in the network, and for learning about the faulty nodes present in the network. The proposed algorithm can be juxtaposed to any existing routing protocol in a MANET. The results of simulation of our protocol using network simulator 2 (ns-2) shows the increase in packet delivery ratio and decrease in overhead compared to the existing protocols. The proposed protocol gains an edge over FTAR, E2FT by nearly 2% and by more than 10% when compared with AODV in terms of packet delivery ratio with nearly 30% faulty nodes in the network. The overhead generated by our protocol is lesser by 1% as compared to FTAR and by nearly 17% as compared to E2FT when there are nearly 30% faulty nodes.     

Mechanical,morphological, and thermogravimetric analysis of alkali-treated Cordia-Dichotoma natural fiber composites

ABSTRACT

Usage of composites with natural fiber reinforcement is drastically increasing in recent times because of their low density, biodegradable nature, and low cost. However, natural fibers have certain core problems such as poor adhesion between the fiber and matrix and a relatively high degree of moisture absorption. Alkaline treatment of natural fibers is aimed at improving the adhesive strength so that effective stress transferability takes place in the composite. In the present work, Cordia-Dichotoma fibers were treated with sodium hydroxide (NaOH) and composites were prepared with different weight ratios of these fibers reinforced with epoxy. The prepared composites were tested for their tensile and flexural strengths (mechanical properties). Besides, for a comprehensive material characterization, IR spectroscopy (FT-IR), scanning electron microscope, and thermogravimetric analysis were carried out. This work investigates the influence of aforementioned NaOH treatment on thermal, mechanical, and morphological properties of the composite material.     

Review: Investigation of Partially Pre-mixed Charge Ignitions (PPCI) Engine Mode

This paper embraces the key points of unpolluted internally combusted engine emissions. Core objective is focused on the recent effort to improve compression ignition(CI) and spark ignition(SI) engine to have fuel-efficient and minimized pollutant emissions. There are many advanced internal combustion engines to overcome the challenges of conventional compression ignition engines of the high level of particulate matter(PM) and oxides of nitrogen emission. One of the latest options on which many ...     

Effectiveness of sodium silicate as gangue depressants in iron ore slimes flotation

The recovery of iron from the screw classifier overflow slimes by direct flotation was studied.The relative effectiveness of sodium silicates with different silica-to-soda mole ratios as depressants for silica and silicate bearing minerals was investigated.Silica-to-soda mole ratio and silicate dosage were found to have significant effect on the separation efficiency.The results show that an increase of Fe content in the concentrate is observed with concomitant reduction in SiO2 and Al2O3 levels when a particular type of sodium silicate at a proper dosage is used.The concentrate of 58.89wt％ Fe,4.68wt％ SiO2,and 5.28wt％ Al2O3 with the weight recovery of 38.74％ and the metal recovery of 41.13％ can be obtained from the iron ore slimes with 54.44wt％ Fe,6.72wt％ SiO2,and 6.80wt％ Al2O3,when Na2SiO3 with a silica-to-soda mole ratio of 2.19 is used as a depressant at a feed rate of 0.2 kg/t.     

Rapid mixing chemical oxidative polymerization: an easy route to prepare PANI coated small-diameter CNTs/PANI nanofibres composite thin film

Composite thin film containing polyaniline (PANI) coated small diameter carbon nanotubes (SDCNTs)/PANI nanofibres (NFs) has been prepared using an easy in situ rapid mixing chemical oxidative polymerization method. SDCNTs thin film was obtained using thermal chemical vapour deposition method in a separate experiment, whilst PANI NFs are formed in situ during the synthesis of composite. In the composite, PANI coated SDCNTs are uniformly distributed among PANI NFs. The presence of SDCNTs during the composite synthesis does not influence the nucleation and growth of PANI NFs. Raman analysis shows a good interaction between PANI and SDCNTs. Room temperature d.c. electrical sheet resistance of SDCNTs/PANI NFs composite thin film surface is three orders lesser than that of PANI NFs thin film (PANI NFs have the same morphology as in the composite) synthesized using the same method but without the presence of SDCNTs.     

The use of life cycle tools to support decision making for sustainable nanotechnologies

Nanotechnology is a broad-impact technology with applications ranging from materials and electronics to analytical methods and metrology. The many benefits that can be realized through the utilization of nanotechnology are intended to lead to an improved quality of life. However, numerous concerns have been expressed regarding the unchecked growth of nanotechnology and the unforeseen consequences it may bring. To address the concerns, nanotechnology must be examined under the microscope of sustainability. This work applies the life cycle perspective to provide an understanding of the challenges facing the development of sustainable nanotechnology. A discussion of the holistic tools used to assess the components of sustainability serves as the basis to examine how a harmony between policy and product development can be maintained using decision making for sustainability. This harmony will be most readily achieved using an enhanced risk management strategy for sustainability that combines sustainability assessment with sustainable chemical design.     

An index to characterize gas-solid and solid-solid mixing from average volume fraction fields

A mixing index based on solid volume fraction fields is developed for gas-solid flows. Conventional mixing indices are based on particle realizations of granular mixing and are applicable to experimental data or discrete element method simulations. However, these indices cannot be used as-is for multifluid models, and an index for characterizing mixing in gas-solid flows from continuous fields is needed. The performance of the new mixing index is tested in two applications. The first is a 3D simulation of the mixing of biomass and sand in a fluidized bed reactor, and the second is a 2D simulation of binary particle segregation in a fluidized bed. The simulations are performed using OpenFOAM®. The mixing index is used to quantify gas-solid mixing using solid volume fractions and solid-solid mixing using solid fractions. The formulation of conventional mixing indices is extended to be used with solid volume fractions fields, and methods for performance improvement are presented.