Parametric study of the electrical to thermal power conversion in an inductively coupledrf plasma torch

An inductively coupled (ic) radio-frequency (rf) stabilized argon plasma was generated in a quartz tube using a 7 MHzrf generator. The electrical and thermal powers were measured and the efficiency of energy conversion was computed. The results indicate that for a constant power input, there is an optimum argon flow rate for which maximum energy conversion efficiency occurs.     

Morphology,thermal, and mechanical properties of polyamide 66/clay nanocomposites with epoxy‐modified organoclay

A new kind of organophilic clay, cotreated by methyl tallow bis‐2‐hydroxyethyl quaternary ammonium and epoxy resin into sodium montmorillonite (to form a strong interaction with polyamide 66 matrix), was prepared and used in preparing PA66/clay nanocomposites (PA66CN) via melt‐compounding method. Three different types of organic clays, CL30B–E00, CL30B–E12, and CL30B–E23, were used to study the effect of epoxy resin in PA66CN. The morphological, mechanical, and thermal properties have been studied using X‐ray diffraction, transmission electron microscopy (TEM), mechanical, and thermal analysis, respectively. TEM analysis of the nanocomposites shows that most of the silicate layers were exfoliated to individual layers and to some thin stacks containing a few layers. PA66CX–E00 and PA66CX–E12 had nearly exfoliated structures in agreement with the SAXS results, while PA66CX–E23 shows a coexistence of intercalated and exfoliated structures. The storage modulus of PA66 nanocomposites was higher than that of the neat PA66 in the whole range of tested temperature. On the other hand, the magnitude of the loss tangent peak in α‐ or β‐transition region decreased gradually with the increase in the clay loading. Multiple melting behavior in PA66 was also observed. Thermal stability more or less decreased with an increasing inorganic content. Young's modulus and tensile strength were enhanced by introducing organoclay. Among the three types of nanocomposites prepared, PA66CX–E12 showed the highest improvement in properties, while PA66CX–E23 showed properties inferior to that of PA66CX–E00 without epoxy resin. In conclusion, an optimum amount of epoxy resin is required to form the strong interaction with the amide group of PA66. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1711–1722, 2006     

Fabrication of fine-grain piezoelectric ceramics using reactive calcination

Fine-grain piezoelectric ceramics with the formula Pb(Zr_0.53Ti_0.47)O₃(PZT) were prepared by a reactive calcination process. Using conventional materials and processing techniques, highly reactive powders of PZT were achieved by calcining to or near the point of maximum volume expansion, whereby associated morphological changes resulted in highly reactive powder. Upon milling, powders <0.3 m were readily obtained allowing densification at temperatures <1000°C. The B-site precursor method, whereby the ZrO₂ and TiO₂ oxides were pre-reacted prior to reaction with PbO, further enhanced reactivity by eliminating intermediate reactions and subsequent phase(s) which can hinder densification and overall homogeneity. Highly dense piezoceramics with grain sizes 1 to 2 m exhibiting dielectric and piezoelectric characteristics comparable to conventionally prepared large grain size materials were obtained.     

Wavelet fuzzy LVQ based speaker verification system

This work evaluates the performance of speaker verification system based on Wavelet based Fuzzy Learning Vector Quantization (WLVQ) algorithm. The parameters of Gaussian mixture model (GMM) are designed using this proposed algorithm. Mel Frequency Cepstral Coefficients (MFCC) are extracted from the speech data and vector quantized through Wavelet based FLVQ algorithm. This algorithm develops a multi resolution codebook by updating both winning and nonwinning prototypes through an unsupervised learning process. This codebook is used as mean vector of GMM. The other two parameters, weight and covariance are determined from the clusters formed by the WLVQ algorithm. The multi resolution property of wavelet transform and ability of FLVQ in regulating the competition between prototypes during learning are combined in this algorithm to develop an efficient codebook for GMM. Because of iterative nature of Expectation Maximization (EM) algorithm, the applicability of alternative training algorithms is worth investigation. In this work, the performance of speaker verification system using GMM trained by LVQ, FLVQ and WLVQ algorithms are evaluated and compared with EM algorithm. FLVQ and WLVQ based training algorithms for modeling speakers using GMM yields better performance than EM based GMM.     

Bidirectional differential on-chip wave-pipelined serial interconnect with surfing

In the literature, surfing technique has been proposed for differential on-chip wave-pipelined serial interconnects with uniform repeaters (UR) and non-uniform repeaters to increase the data transfer rate for unidirectional schemes. In this paper, a novel bidirectional data transfer through the differential wave-pipelined serial interconnects with surfing for UR is proposed. A new circuit called ‘Bidirectional surfing inverter pair’ is proposed for differential wave-pipelined serial interconnects. The method of logical effort is used for the design of surfing circuits. To evaluate the efficiency of these techniques, 40 mm metal 4 interconnects using the proposed surfing techniques are implemented along with transmitter, receiver and delay locked loop in UMC 180 nm technology and their performances are studied through post layout simulations. The proposed bidirectional differential surfing scheme has a maximum data transfer rate of 2 Gb/s and has allowable jitter of 52 ps on both directions through the same interconnects.     

Hybrid Paper–Plastic Microchip for Flexible and High‐Performance Point‐of‐Care Diagnostics

A low‐cost and easy‐to‐fabricate microchip remains a key challenge for the development of true point‐of‐care (POC) diagnostics. Cellulose paper and plastic are thin, light, flexible, and abundant raw materials, which make them excellent substrates for mass production of POC devices. Herein, a hybrid paper–plastic microchip (PPMC) is developed, which can be used for both single and multiplexed detection of different targets, providing flexibility in the design and fabrication of the microchip. The developed PPMC with printed electronics is evaluated for sensitive and reliable detection of a broad range of targets, such as liver and colon cancer protein biomarkers, intact Zika virus, and human papillomavirus nucleic acid amplicons. The presented approach allows a highly specific detection of the tested targets with detection limits as low as 10² ng mL^?1 for protein biomarkers, 10³ particle per milliliter for virus particles, and 10² copies per microliter for a target nucleic acid. This approach can potentially be considered for the development of inexpensive and stable POC microchip diagnostics and is suitable for the detection of a wide range of microbial infections and cancer biomarkers.     

Who helps and harms whom? Relational antecedents of interpersonal helping and harming in organizations.

Antecedents of interpersonally directed forms of citizenship and counterproductive behaviors (i.e., interpersonal helping and harming, respectively) have been studied most often under the broad categories of individual differences and job attitudes. Although these behaviors often are exhibited within the confines of interpersonal relationships, the impact of relationship quality and context on such behaviors has been understudied. The present study uses a social networks framework to examine the relational antecedents of interpersonal helping and harming in a sample of 62 members of a college sorority house. Results indicate that relational variables--direct, third-party, and structural or positional characteristics of positive and negative affective networks, and the frequency of voluntary interaction--explain substantial incremental variance (beyond traditional predictors) in helping and harming. Moreover, helping and harming were themselves weakly positively interrelated. Implications for theory and practice are discussed. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Enhanced SO2 concentrations observed over northern India: role of long-range transport

The combustion of fossil fuels (coal and petroleum products) constitutes a source of continuous release of anthropogenic SO₂ into the atmosphere. Furthermore, natural sources such as volcanoes can inject large amounts of SO₂ directly into the troposphere and sometimes even into the stratosphere. These event-based volcanic eruptions provide solitary opportunities to study the transport and transformation of atmospheric constituents. In this study, we present an episode of high SO₂ concentration over northern India as a result of long-range transport from Africa using multiple satellite observations. Monthly averaged column SO₂ values over the Indo-Gangetic Plain (IGP) were observed in the range of 0.6–0.9 Dobson units (DU) during November 2008 using observations from the Ozone Monitoring Instrument (OMI). These concentrations were conspicuously higher than the background concentrations (<0.3 DU) observed during 2005–2010 over this region. The columnar SO₂ loadings were highest on 6 November over most of the IGP region and even exceeded 6 DU, a factor of 10–20 higher than background levels in some places. These enhanced SO₂ levels were not reciprocated in satellite-derived NO₂ or CO columns, indicating transport from a non-anthropogenic SO₂ source. As most of the local aerosols over the IGP region occur below 3 km, a well-separated layer at 4–5 km was observed from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite. Wind fields and back-trajectory analysis revealed a strong flow originating from the Dalaffilla volcanic eruption in Ethiopia during 4–6 November 2008. Although volcanic SO₂ plumes have been extensively studied over many parts of Asia, Europe, and the USA, analysis of such events for the IGP region is being reported for the first time in this study.     

Filter design for MIMO sampling and reconstruction

We address the problem of finite impulse response (FIR) filter design for uniform multiple-input multiple-output (MIMO) sampling. This scheme encompasses Papoulis' generalized sampling and several nonuniform sampling schemes as special cases. The input signals are modeled as either continuous-time or discrete-time multiband input signals, with different band structures. We present conditions on the channel and the sampling rate that allow perfect inversion of the channel. Additionally, we provide a stronger set of conditions under which the reconstruction filters can be chosen to have frequency responses that are continuous. We also provide conditions for the existence of FIR perfect reconstruction filters, and when such do not exist, we address the optimal approximation of the ideal filters using FIR filters and a minmax l/sub 2/ end-to-end distortion criterion. The design problem is then reduced to a standard semi-infinite linear program. An example design of FIR reconstruction filters is given.