DEMATEL-based model to improve the performance in a matrix organization

Carrying out a design project for a high-tech facility requires a large amount of special knowledge in order to deal with the specific requirements from the client. Often the client forms a matrix organization, structured with several interrelated functional and project divisions to dictate the various requirements and needs. However, an ill-defined matrix organization is likely to result in late and inadequate decisions. This in turn may result in a poorly performing design. Identifying those divisions within the organization that perform poorly in the way they provide information for the project is critical. Therefore, this study proposes an innovative model to identify those divisions that may be responsible for the poor performance of the design project. The proposed model integrates the satisfied importance analysis (SIA) and the decision making trial and evaluation laboratory technique (DEMATEL). The SIA evaluates the performance of each division, while the DEMATEL captures the causal relationships among divisions to generate an influence-relations map. The proposed model is applied to a real-world high-tech facility design project in Taiwan to demonstrate the strengths of the model.     

Renal Protective Effects of Low Molecular Weight of Inonotus obliquus Polysaccharide (LIOP) on HFD/STZ-Induced Nephropathy in Mice

Diabetic nephropathy (DN) is the leading cause of end-stage renal disease in diabetes mellitus. Oxidative stress, insulin resistance and pro-inflammatory cytokines have been shown to play an important role in pathogeneses of renal damage on type 2 diabetes mellitus (DM). Inonotus obliquus (IO) is a white rot fungus that belongs to the family Hymenochaetaceae; it has been used as an edible mushroom and exhibits many biological activities including anti-tumor, anti-oxidant, anti-inflammatory and anti-hyperglycemic properties. Especially the water-soluble Inonotus obliquus polysaccharides (IOPs) have been previously reported to significantly inhibit LPS-induced inflammatory cytokines in mice and protect from streptozotocin (STZ)-induced diabetic rats. In order to identify the nephroprotective effects of low molecular weight of IOP fraction (LIOP), from the fruiting bodies of Inonotus obliquus, high-fat diet (HFD) plus STZ-induced type 2-like diabetic nephropathy C57BL/6 mice were investigated in this study. Our data showed that eight weeks of administration of 10–100 kDa, LIOP (300 mg/kg) had progressively increased their sensitivity to glucose (less insulin tolerance), reduced triglyceride levels, elevated the HDL/LDL ratio and decreased urinary albumin/creatinine ratio(ACR) compared to the control group. By pathological and immunohistochemical examinations, it was indicated that LIOP can restore the integrity of the glomerular capsules and increase the numbers of glomerular mesangial cells, associated with decreased expression of TGF-β on renal cortex in mice. Consistently, three days of LIOP (100 μg/mL) incubation also provided protection against STZ + AGEs-induced glucotoxicity in renal tubular cells (LLC-PK1), while the levels of NF-κB and TGF-β expression significantly decreased in a dose-dependent manner. Our findings demonstrate that LIOP treatment could ameliorate glucolipotoxicity-induced renal fibrosis, possibly partly via the inhibition of NF-κB/TGF-β1 signaling pathway in diabetic nephropathy mice.     

Effect of bump size on current density and temperature distributions in flip-chip solder joints

Three dimensional thermo-electrical analysis was employed to simulate the current density and temperature distributions for eutectic SnAg solder bumps with shrinkage bump sizes. It was found that the current crowding effects in the solder were reduced significantly for smaller solder joints. Hot-spot temperatures and thermal gradient were increased upon reducing the solder. The maximum temperature for solder joint with 144.7 μm bump height is 103.15 °C which is only 3.15 °C higher than the substrate temperature due to Joule heating effect. However, upon reducing the bump height to 28.9 μm, the maximum temperature in the solder increased to 181.26 °C. Serious Joule heating effect was found when the solder joints shrink. The higher Joule heating effect in smaller solder joints may be attributed to two reasons, first the increase in resistance of the Al trace, which is the main heating source. Second, the average and local current densities increased in smaller bumps, causing higher temperature increase in the smaller solder bumps.     

Composite Optical Bend Loss Sensor for Pressure and Shear Measurement

A composite optical bend loss sensor for measuring 3-D forces has been developed. The sensor is composed of two optic fiber meshes which are embedded into a polydimethylsiloxane (PDMS) slab. The sensor consists of an array of optical fibers lying in perpendicular rows and columns sandwiched inside an elastomeric pad. A map of normal and shear stress is constructed based on observed macrobending through the intensity attenuation from physical deformation of two adjacent perpendicular fibers. Due to the new addition of the composite design and acrylic holder, the stability of the present sensor is found to be significantly better than our previously reported microfabricated optical bend loss sensor. In this paper, we will report the results of an optical bend loss simulation using the beam propagation method based on a series of images captured by a CCD camera on the fiber's bending curvatures. The result from the simulation will be compared with the results obtained from the experiment. Other results include vertical force and shear measurements at a single pressure point of the sensor. A force image algorithm is used to map the force distribution detected by the sensor. Here, we will present the results of six different shape patterns and two force magnitudes on each shape using a neural network system. We will also present a radio frequency sensor module, which we developed for the composite optical bend loss sensor for remote sensing.     

Particle Size Effect on the Packaging Performance of YAG:Ce Phosphors in White LEDs

The synthesis of cerium-doped yttrium aluminum garnet (YAG:Ce) phosphor of different sizes with uniform size distribution was carried out using solid-state reaction followed by grinding and sieving method. The effect of particle size distribution of YAG:Ce phosphors on the photoluminescence (PL) properties was investigated. The results demonstrate that the uniform size distribution and particle size affects the packaging performance in white light emitting diode (LED) applications. The YAG:Ce phosphors with different particle sizes were packaged in white LEDs using different amounts of each phosphors in order to get similar efficiency as that of commercially available YAG:Ce phosphors. It was observed that minimum amount of phosphor material is required for smaller particle size for getting the similar efficiency as that exhibited by commercially available YAG:Ce phosphors. The results are particularly interesting in view of reducing the cost of current LEDs by lowering the amount of phosphors without compromising the efficiencies of final LED package. A systematic study of YAG:Ce phosphors on the packing performance in white LEDs is reported.     

InGaN-AlInGaN multiquantum-well LEDs

InGaN-GaN and InGaN-AlInGaN multiquantum-well (MQW) light-emitting diodes (LEDs) were both fabricated and their optical properties were evaluated by photoluminescence (PL) as well as electroluminescence (EL). We found that the PL peak position of the InGaN-AlInGaN MQW occurs at a much lower wavelength than that of the InGaN-GaN MQW. The PL intensity of the InGaN-AlInGaN MQW was also found to be larger. The EL intensity of the InGaN-AlInGaN MQW LED was also found to be larger than that of the InGaN-GaN MQW LED under the same amount of injection current. Furthermore, it was found that EL spectrum of the InGaN-AlInGaN MQW LED is less sensitive to the injection current. These observations all suggest that we can improve the properties of nitride-based LEDs by using AlInGaN as the barrier layer     

Flexible polymeric rib waveguide with self-align couplers system

The authors report a polymeric based rib waveguide with U shape self-align fiber couplers system using a simple micromolding process with SU8 as a molding material and polydimethysiloxane as a waveguide material. The material is used for its good optical transparency, low surface tension, biocompatibility, and durability. Furthermore, the material is highly formable. This unique fabrication molding technique provides a means of keeping the material and manufacturing costs to a minimum. The self-align fiber couplers system also proves a fast and simple means of light coupling. The flexible nature of the waveguide material makes this process ideal for a potential wearable optical sensor.     

Induced Pluripotent Stem Cell-Derived Conditioned Medium Promotes Endogenous Leukemia Inhibitory Factor to Attenuate Endotoxin-Induced Acute Lung Injury

The conditioned medium of induced pluripotent stem cells (iPSC-CM) can attenuate neutrophil recruitment and endothelial leakage of lipopolysaccharide (LPS)-induced acute lung injury (ALI). Therefore, we investigated the mechanisms by which iPSC-CM regulate the interaction between neutrophils and the endothelium in ALI. Murine iPSCs (miPSCs) were delivered intravenously to male C57BL/6 mice (8–12 weeks old) 4 h after intratracheal LPS injection. A miPSC-derived conditioned medium (miPSC-CM) was delivered intravenously to mice after intratracheal LPS injection. DMSO-induced HL-60 cells (D-HL-60, neutrophil-like cells) and human umbilical vein endothelial cells (HUVECs) were used as in vitro models to assess the interaction of neutrophils and endothelial cells. miPSC-CM diminished the histopathological changes in the lungs and the neutrophil count in bronchoalveolar lavage fluids of ALI mice. miPSC-CM attenuated the expression of adhesion molecules in the lungs of ALI mice. Human iPSC conditioned medium (hiPSC-CM) reduced the expression of adhesion molecules in a HUVEC and D-HL-60 co-culture after LPS stimulation, which decreased the transendothelial migration (TEM) of D-HL-60. A human angiogenesis factors protein array revealed that leukemia inhibitory factor (LIF) was not detected in the absence of D-HL-60 and hiPSC-CM groups. hiPSC-CM significantly promoted the production of endogenous LIF in in vitro models. Administration of an anti-LIF antibody not only reversed the effect of iPSC-CM in ALI mice, but also blocked the effect of iPSC-CM on neutrophils TEM in in vitro models. However, a controlled IgG had no such effect. Our study demonstrated that iPSC-CM promoted endogenous LIF to inhibit neutrophils TEM and attenuate the severity of sepsis-induced ALI.     

Software Reliability Analysis and Measurement Using Finite and Infinite Server Queueing Models

Software reliability is often defined as the probability of failure-free software operation for a specified period of time in a specified environment. During the past 30 years, many software reliability growth models (SRGM) have been proposed for estimating the reliability growth of software. In practice, effective debugging is not easy because the fault may not be immediately obvious. Software engineers need time to read, and analyze the collected failure data. The time delayed by the fault detection & correction processes should not be negligible. Experience shows that the software debugging process can be described, and modeled using queueing system. In this paper, we will use both finite, and infinite server queueing models to predict software reliability. We will also investigate the problem of imperfect debugging, where fixing one bug creates another. Numerical examples based on two sets of real failure data are presented, and discussed in detail. Experimental results show that the proposed framework incorporating both fault detection, and correction processes for SRGM has a fairly accurate prediction capability.