Method for increasing <Emphasis Type="Italic">β</Emphasis>-SiC yield on solid state reaction of coal fly ash and activated carbon powder

A novel process for increasing β-SiC yield on solid state reaction of coal fly ash and micro powder activated carbon powder has been proposed. β-SiC powder was synthesized at temperature 1300°C for 2 h under vacuum condition with 1 l/min argon flow. Cycling synthesis process has been developed for increasing β-SiC yield on solid state reaction of coal fly ash and activated carbon powder. Synthesized products were analyzed by XRD with Cu-Kα radiation, FTIR spectrometer and SEM fitted with EDAX. The results show that the amount of relative β-SiC is increased with the number of cycling synthesis.     

Tracking the Interplay between Bound Peptide and the Lid Domain of DnaK,Using Molecular Dynamics

Hsp70 chaperones consist of two functional domains: the 44 kDa Nucleotide Binding Domain (NBD), that binds and hydrolyses ATP, and the 26 kDa Substrate Binding Domain (SBD), which binds unfolded proteins and reactivates them, utilizing energy obtained from nucleotide hydrolysis. The structure of the SBD of the bacterial Hsp70, DnaK, consists of two sub-domains: A β-sandwich part containing the hydrophobic cavity to which the hepta-peptide NRLLLTG (NR) is bound, and a segment made of 5 α-helices, called the “lid” that caps the top of the β-sandwich domain. In the present study we used the Escherichia coli Hsp70, DnaK, as a model for Hsp70 proteins, focusing on its SBD domain, examining the changes in the lid conformation. We deliberately decoupled the NBD from the SBD, limiting the study to the structure of the SBD section, with an emphasis on the interaction between the charges of the peptide with the residues located in the lid. Molecular dynamics simulations of the complex revealed significant mobility within the lid structure; as the structure was released from the forces operating during the crystallization process, the two terminal helices established a contact with the positive charge at the tip of the peptide. This contact is manifested only in the presence of electrostatic attraction. The observed internal motions within the lid provide a molecular role for the function of this sub-domain during the reaction cycle of Hsp 70 chaperones.     

Particle Surfaces to Study Macrophage Adherence,Migration, and Clearance

Nanoparticle adsorption to substrates pose a unique challenge to understand uptake mechanisms as it involves the organization of complex cytoskeletal components by cells to perform endocytosis/phagocytosis. In particular, it is not well‐understood from a cell mechanics perspective how the adhesion of particles on substrate will influence the ease of material clearance. By using a particle model, key contributing factors underlying cell adhesion on nonporous silica particle surfaces, migration and engulfment, are simulated and studied. Following a 24 h incubation period, monocyte‐derived macrophages and A549 epithelial cells are able to adhere and remove particles in their local vicinity through induction of adhesive pulling arise from cell traction forces and phagocytic/endocytic mechanisms, in a size‐dependent manner. It is observed that such particle‐decorated surfaces can be used to address the influence of surface topography on cell behavior. Substrates which presented 480 nm silica particles are able to induce greater development and maturation of focal adhesions, which play an important role in cellular mechanoregulation. Moreover, under a chemotactic influence, in the presence of 30% fetal bovine serum, macrophages are able to uptake the particles and be directed to translocate along a concentration gradient, indicating that local mechanical effects do not substantially impair normal physiological functions.     

Determination of biogenic amines in selected Malaysian food

The biogenic amines tryptamine (TRP), putrescine (PUT), histamine (HIS), tyramine (TYR) and spermidine (SPD) were determined in 62 selected food items commonly consumed in Malaysia. This include the local appetisers “budu” and “cincalok”, canned fish, salt-cured fish, meat products, fruit juice, canned vegetables/fruits and soy bean products. After the aqueous extraction, the samples were derivatised with dansyl chloride before analysing using reversed phase HPLC with UV detection. Mean levels of TRP, PUT, HIS, TYR and SPD in eight budu samples were 82.7, 38.1, 187.7, 174.7 and 5.1 mg kg⁻¹, respectively. The main biogenic amines found in cincalok were PUT, HIS and TYR where the mean values were 330.7, 126.1 and 448.8 mg kg⁻¹, respectively. With the exception of “pekasam” and “belacan”, significantly lower levels of biogenic amines were found in canned fish and salt-cured fish samples. Non detectable or low levels of biogenic amines were found in meat, fruit juice and canned vegetables/fruit samples.     

The influence of sintering temperature on the properties of compacted bovine hydroxyapatite

On the sintering characteristic of hydroxyapatite (HA), the resulting microstructure and properties are influenced not only by the characteristic and impurities of materials but also are found to be dependent on the thermal history during the fabrication process. This research is concerned with the effect of sintering temperature on the relative density, hardness, and phase purity after sintering process. Bovine HA (BHA) powder obtained from heated local cortical bovine bone at 900 °C for 2 h was uniaxially pressed at 156 MPa into green bodies using a 20 mm cylindrical dies. The compacted green body was pressurelessly sintered in air atmosphere at temperatures ranging from 1000 to 1400 °C, at a furnace ramp rate of 5 °C/min and dwell time of 2 h. The BHA starting powder was characterized using XRD and FTIR. SEM was also used for observing the microstructures of the starting material. The sintered BHA specimens were analyzed using Archimedes method for measuring density; XRD for phase stability; and Vickers method for hardness measurement. The analysis results show that the starting BHA powder and the sintered BHA specimens contain HA. The intensity of the three main peaks of HA decreases with increasing sintering temperature which may be due to decomposition of HA at high temperature. The density and hardness of BHA increases with increasing sintering temperature based on the results obtained.     

Determination of synthetic phenolic antioxidants in food items using reversed-phase HPLC

A HPLC with gradient elution method for the determination of the synthetic phenolic antioxidants (SPAs) propyl gallate (PG), tertiary butyl hydroquinone (TBHQ), butylated hydroxyanisole (BHA), and butylated hydroxytoluene (BHT) in food items is described. A C18 column served as the stationary phase; the gradient elution was formed by acetonitrile and water:acetic acid (1%). The UV detector was set at 280 nm. Under the recommended conditions, separation of the four SPAs was achieved in less than 8 min. Analytical characteristics of the HPLC method such as limit of detection, linear range, and reproducibility were evaluated. Extraction parameters were optimized for the recoveries of the SPAs in different types of food items (cooking oil, margarine and butter, and cheese). Before the HPLC separation, the SPAs were extracted with methanol/acetonitrile (1:1, v/v) and were subjected to vortex/ultrasonic treatment. The extracts were next kept in a freezer (∼2 h) to precipitate co-extracted components. Recoveries of the SPAs when spiked to cooking oil, margarine, butter and cheese at 50 and 200 mg l⁻¹ were in the ranges 93.3–108.3% for PG, 85.3–108.3% for TBHQ, 96.7–101.2% for BHA and 73.9–94.6% for BHT. The method was applied to the determination of SPAs in 38 food items (16 cooking oils, ten margarine, six butter and six cheese samples). The levels of SPAs in positive samples are all below the legal limits of Malaysia.     

Determination of aflatoxins in animal feeds by HPLC with multifunctional column clean-up

A reversed-phase HPLC method with fluorescence detection for the determination of the aflatoxins B1, B2, G1 and G2 in 42 animal feeds, comprising corn (16), soya bean meal (8), mixed meal (13), sunflower, wheat, canola, palm kernel, copra meals (1 each) was carried out. The samples were first extracted using acetonitrile:water (9:1), and was further cleaned-up using a multifunctional column. Optimum conditions for the extraction and chromatographic separation were investigated. By adopting an isocratic chromatographic system using a mobile phase comprising acetonitrile:methanol:water (8:27:65, v/v/v), the separation of the four aflatoxins was possible within 30 min. Recoveries for aflatoxins B1, B2, G1 and G2 were 98 ± 0.7%, 95 ± 1.0%, 94 ± 3.6% and 97 ± 4.3%, respectively. The results show that eight samples (19%) were contaminated with aflatoxins, ranging from 6.5 to 101.9 ng g^?1. Total aflatoxin levels in three samples exceed the legal limits of many countries of 20 ng g^?1.     

A review on biomass‐based hydrogen production and potential applications

In this paper, a detailed review is presented to discuss biomass‐based hydrogen production systems and their applications. Some optimum hydrogen production and operating conditions are studied through a comprehensive sensitivity analysis on the hydrogen yield from steam biomass gasification. In addition, a hybrid system, which combines a biomass‐based hydrogen production system and a solid oxide fuel cell unit is considered for performance assessment. A comparative thermodynamic study also is undertaken to investigate various operational aspects through energy and exergy efficiencies. The results of this study show that there are various key parameters affecting the hydrogen production process and system performance. They also indicate that it is possible to increase the hydrogen yield from 70 to 107 g H₂ per kg of sawdust wood. By studying the energy and exergy efficiencies, the performance assessment shows the potential to produce hydrogen from steam biomass gasification. The study further reveals a strong potential of this system as it utilizes steam biomass gasification for hydrogen production. To evaluate the system performance, the efficiencies are calculated at particular pressures, temperatures, current densities, and fuel utilization factors. It is found that there is a strong potential in the gasification temperature range 1023–1423 K to increase energy efficiency with a hydrogen yield from 45 to 55% and the exergy efficiency with hydrogen yield from 22 to 32%, respectively, whereas the exergy efficiency of electricity production decreases from 56 to 49.4%. Hydrogen production by steam sawdust gasification appears to be an ultimate option for hydrogen production based on the parametric studies and performance assessments that were carried out through energy and exergy efficiencies. Finally, the system integration is an attractive option for better performance. Copyright © 2012 John Wiley & Sons, Ltd.     

Schiff Base Derived from p-Nitrobenzaldehyde and1,8-Naphthalenediamine Precursor in Metal Ions Uptake

The characteristic coordination behavior of Schiff bases synthesized from carbonyl been investigated and studied in different field, such as their chemistry and biological activity and primary amine compounds have Few numbers of Schiff bases were implicated in analytical aspect such as metal uptake techniques. The Schiff base and may its chelates derived from p-nitrobenzaldehyde and 1,8-naphthalenediamine were synthesized and characterized by different analytical tools. The chemical structures have been elucidated by physiochemical methods. The site of the coordination with metal ion gave this Schiff base the advantage to be used in uptake techniques, either as batch or column. The uptake studies preformed and analyzed with respect to justification of the site of coordination.     

UAVs for Wi-Fi Receiver Mapping and Packet Sniffing with Antenna Radiation Pattern Diversity

The paper introduces an innovative way of exploiting aerial robotics or Unmanned Aerial Vehicles (UAVs) in the communication field which adds up a wider angle of applications to the already vast use of this new technology. Since IEEE 802 Wi-Fi technology is popular and widely used nowadays (in smartphones, laptops, access points, smart TVs etc.), performance reducing interference caused by having any two or more close-by 2.4 GHz networks on the same channel can occur especially in highly dense populated urban areas. We design an aerial robot (UAV) with a powerful Wi-Fi receiver along with high gain antennas and some other equipment enabling it to operate as a so called Passive sniffer, listening to all Wi-Fi traffic in range and extracting network information along with GPS coordinates and illustrate the results on Geographical maps using Wi-Fi Triangulation Techniques. Having such capabilities on an autonomous aerial robot enables geographical packet analysis and the observation of widespread traffic, plus the ability to analyse and graph the areas with coverage and locate the highly crowded areas with higher interference. Therefore finding solutions to mitigate this undesirable performance degrading interference.