Reconstruction of two-dimensional permittivity distribution using the distorted Born iterative method

The distorted Born iterative method (DBIM) is used to solve two-dimensional inverse scattering problems, thereby providing another general method to solve the two-dimensional imaging problem when the Born and the Rytov approximations break down. Numerical simulations are performed using the DBIM and the method proposed previously by the authors (Int. J. Imaging Syst. Technol., vol.1, no.1, p.100-8, 1989) called the Born iterative method (BIM) for several cases in which the conditions for the first-order Born approximation are not satisfied. The results show that each method has its advantages; the DBIM shows faster convergence rate compared to the BIM, while the BIM is more robust to noise contamination compared to the DBIM.     

Application of supercritical fluid chromatography in the quantitative analysis of minor components (carotenes,vitamin E,sterols, and squalene) from palm oil

The application of supercritical fluid chromatography (SFC) coupled with a UV variable-wavelength detector to isolate the minor components (carotenes, vitamin E, sterols, and squalene) in crude palm oil (CPO) and the residual oil from palm-pressed fiber is reported. SFC is a good technique for the isolation and analysis of these compounds from the sources mentioned. The carotenes, vitamin E, sterols, and squalene were isolated in less than 20 min. The individual vitamin E isomers present in palm oil were also isolated into their respective components, α-tocopherol, α-tocotrienol, γ-tocopherol, γ-tocotrienol, and δ-tocotrienol. Calibration of all the minor components of palm as well as the individual components of palm vitamin E was carried out and was found to be comparable to those analyzed by other established analytical methods.     

Treatment of linear alkylbenzene sulfonate (LAS) wastewater by internal electrolysis--biological contact oxidation process

Surfactant wastewater is usually difficult to treat due to its toxicity and poor biodegradability. A separate physico-chemical or biochemical treatment method achieves a satisfactory effect with difficulty. In this study, treatment of the wastewater collected from a daily chemical plant by the combination processes of Fe/C internal electrolysis and biological contact oxidation was investigated. For the internal electrolysis process, the optimal conditions were: pH = 4-5, Fe/C = (10-15):1, air-water ratio = (10-20):1 and hydraulic retention time (HRT)= 2 h. For the biological contact oxidation process, the optimal conditions were: HRT = 12 h, DO = 4.0-5.0 mg/L. Treated by the above combined processes, the effluent could meet the I-grade criteria specified in Integrated Wastewater Discharge Standard of China (GB 8978-1996). The results provide valuable information for full-scale linear alkylbenzene sulfonate wastewater treatment.     

Work fatigue and physiological symptoms in different occupations of high-elevation construction workers

The objective of this study is to investigate whether work fatigue and physiological symptoms that high-elevation construction workers experience would be affected by the occupations. Questionnaires of demographic data and subjective fatigue symptoms as well as some physiological measurements were carried out, pre- and post-shift, on scaffolders, steel fixers, formworkers, electrician-plumbers, concreters and miscellaneous workers at a high-rise building construction site. This study found that some subjective fatigue symptoms coincide with the life style of some workers and that the extent of fatigue symptoms and physiological strains varies among different occupations of construction workers. Scaffolders, steel fixers and formworkers are categorized as physically demanding fatigue type of workers, while concreters, electrician-plumbers and miscellaneous workers as general type. The prevalence and occurrence of subjective fatigue symptoms indicate high-elevation workers have more complaints of “projection of physical impairment” than “drowsiness and dullness” and “difficulty in concentration”. Some unexpected changes (i.e., post-shift measurements are greater than pre-shift ones) in some strength tests in scaffolders and concreters were consistent with the observations of how they exercised their bodies during work shift. Considerable variation of average heart rate among occupations was found, with scaffolders the highest and concreters the lowest. This study concludes that questionnaires of subjective fatigue symptoms and some physiological measurements can be used as indicators to predict the extent of strains or hazards which construction workers encounter. In terms of management program of safety and health, more attention should be paid to those physically demanding workers, such as scaffolders, workers with lower sense of safety and health, such as miscellaneous workers, and workers with older age, such as concreters.     

Real time 3D simulation for nose surgery and automatic individual prosthesis design

This paper presents an intuitive nose surgery planning and simulation system, using 3D laser scan image and lateral X-ray image, to provide high quality prediction of the postoperative appearance, and design the patient specific prosthesis model automatically. After initial registration, the internal surface of soft tissue at the nose region was generated by the statistical data for soft tissue thickness adapted by the individual thickness information from the X-ray image. Then, the sketch contour of the 3D scan data on the lateral X-ray image was modified manually or adjusted automatically according to some aesthetic statistical data, to drive the simulation in real time by the state-of-the-art Laplacian surface deformation method. When satisfied with the 3D postoperative appearance, the deformation was mapped to the internal surface of soft tissue, and the change before and after simulation was utilized to generate the patient specific prosthesis model automatically. The surgeons who used the system confirmed that this planning system is attractive and has potential for daily clinical practice.     

A new strategy for urinary sediment segmentation based on wavelet, morphology and combination method

This paper presents a strategy for segmenting urinary sediment based on wavelet, morphology and combination method. Firstly, the wavelet transforms and morphology are used to get rid of the effect of the defocusing and get the subimages that include the particles. Then based on the characteristics of the subimages, edge detection and adaptive thresholding are employed adaptively. Finally, a simplified watershed algorithm for the overlapping particles is used. The experiment results show that the method can segment the defocusing urinary sediment images effectively and precisely.     

Catalytic oxidation with Al-Ce-Fe-PILC as a post-treatment system for coffee wet processing wastewater

The effluent from the anaerobic biological treatment of coffee wet processing wastewater (CWPW) contains a non-biodegradable compound that must be treated before it is discharged into a water source. In this paper, the wet hydrogen peroxide catalytic oxidation (WHPCO) process using Al-Ce-Fe-PILC catalysts was researched as a post-treatment system for CWPW and tested in a semi-batch reactor at atmospheric pressure and 25 °C. The Al-Ce-Fe-PILC achieved a high conversion rate of total phenolic compounds (70%) and mineralization to CO(2) (50%) after 5 h reaction time. The chemical oxygen demand (COD) of coffee processing wastewater after wet hydrogen peroxide catalytic oxidation was reduced in 66%. The combination of the two treatment methods, biological (developed by Cenicafé) and catalytic oxidation with Al-Ce-Fe-PILC, achieved a 97% reduction of COD in CWPW. Therefore, the WHPCO using Al-Ce-Fe-PILC catalysts is a viable alternative for the post-treatment of coffee processing wastewater.     

In-situ comprehensive calibration of a tri-port nano-electro-mechanical device

We report on experiments performed in vacuum and at cryogenic temperatures on a tri-port nano-electro-mechanical (NEMS) device. One port is a very nonlinear capacitive actuation, while the two others implement the magnetomotive scheme with a linear input force port and a (quasi-linear) output velocity port. We present an experimental method enabling a full characterization of the nanomechanical device harmonic response: the nonlinear capacitance function C(x) is derived, and the normal parameters k and m (spring constant and mass) of the mode under study are measured through a careful definition of the motion (in meters) and of the applied forces (in Newtons). These results are obtained with a series of purely electric measurements performed without disconnecting/reconnecting the device, and rely only on known dc properties of the circuit, making use of a thermometric property of the oscillator itself: we use the Young modulus of the coating metal as a thermometer, and the resistivity for Joule heating. The setup requires only three connecting lines without any particular matching, enabling the preservation of a high impedance NEMS environment even at MHz frequencies. The experimental data are fit to a detailed electrical and thermal model of the NEMS device, demonstrating a complete understanding of its dynamics. These methods are quite general and can be adapted (as a whole, or in parts) to a large variety of electromechanical devices.     

Proteins in longissimus muscle of Korean native cattle and their relationship to meat quality

Proteomic profiling by two-dimensional gel electrophoresis and mass spectrometry of longissimus dorsi muscle tissue from Korean native cattle identified seven proteins that are differentially expressed in animals producing low and high quality grade beef. The expression level of alpha actin is increased in high quality grade beef and the expression levels of T-complex protein 1 (TCP-1), heat shock protein beta-1 (HSP27), and inositol 1,4,5-triphosphate receptor type1 (IP3R1), a new protein to be associated with meat quality, are increased in low quality grade beef. In particular, the quantitation of HSP27 and IP3R1 by both silver staining and immunoblotting correlated well with intramuscular fat content, meat tenderness, and free calcium levels. The data suggest that HSP27 and IP3R1 are potential meat quality biomarkers and their identification provides new insight into the molecular mechanisms and pathways associated with overall beef quality.