Study on super-long-life cores loaded with minor actinide fuel

Super-long-life fast breeder reactor cores (SLLC) loaded with minor actinide (MA) fuel were designed aiming at continuous operation without refueling during plant lifetime and efficient reduction of MA nuclides (Np, Am and Cm). The feasibility was studied from nuclear and thermal characteristics. As a result, 1000 MWe and 300 MWe SLLCs with small reactivity change and power swing during plant lifetime were found to be feasible. MAs can be confined and transmuted in the reactor during plant life. A 1000 MWe SLLC can transmute MAs of 10 ton which come from 13 light water reactors (1000 MWe).     

90-nm process-variation adaptive embedded SRAM modules with power-line-floating write technique

The power consumption of a low-power system-on-a-chip (SoC) has a large impact on the battery life of mobile appliances. General SoCs have large on-chip SRAMs, which consume a large proportion of the whole LSI power. To achieve a low-power SoC, we have developed embedded SRAM modules, which use some low-power SRAM techniques. One technique involves expanding the write margin; another is a power-line-floating write technique, which enables low-voltage write operation. The power-line-floating write technique makes it possible to lower the minimum operating supply voltage by 100 mV. The other techniques involve using a process-variation-adaptive write replica circuit and reducing leakage current. These techniques reduce active power during write operations by 18% and reduce active leakage of the word-line driver by 64%. The prototype SRAM modules achieve 0.8-V operation, and a 512-kb SRAM module achieves 48.4-/spl mu/A active leakage and 7.8-/spl mu/A standby leakage with worst-leakage devices.     

A 300-MHz 25-/spl mu/A/Mb-leakage on-chip SRAM module featuring process-variation immunity and low-leakage-active mode for mobile-phone application processor

An on-chip 1-Mb SRAM suitable for embedding in the application processor used in mobile cellular phones was developed. This SRAM supports three operating modes - high-speed active mode, low-leakage low-speed active mode, and standby mode - and uses a subdivisional power-line control (SPC) scheme. The combination of three operating modes and the SPC scheme realizes low-power operation under actual usage conditions. It operates at 300 MHz, with leakage of 25 /spl mu/A/Mb in standby mode, and 50 /spl mu/A/Mb at the low-leakage active mode. This SRAM also uses a self-bias write scheme that decreases of minimum operating voltage by about 100 mV.     

Purification and some properties of a chitinase from Xanthomonas sp. strain AK

Chitinase B (ChiB) was purified from the culture supernatant of Xanthomonas sp. strain AK by Phenyl-Toyopearl 650M and DEAE-Toyopearl 650M column chromatographies. The purified enzyme preparation gave a single band on SDS-polyacrylamide gel electrophoresis and the molecular weight of ChiB was estimated to be 48,000. The enzyme was optimally active at pH 6.0 and 60 degrees C. N-Terminal amino acid sequence analysis suggested that ChiB is a member of glycosyl hydrolase family 18 and that it is genetically different from ChiA recently reported (Sakka et al., J. Ferment. Bioeng., 86, 527-533, 1998). Immunological analysis suggested that ChiB was the major chitinase species in the culture supernatant of Xanthomonas sp. strain AK and that production of the enzyme was induced by the presence of chitin.     

SRAM Circuit With Expanded Operating Margin and Reduced Stand-By Leakage Current Using Thin-BOX FD-SOI Transistors

The deterioration of operating margin and increasing leakage current in SRAM are becoming critical problems with the advance of process scaling. To solve these problems, we propose a low-power SRAM circuit using thin buried-oxide fully depleted silicon-on-insulator transistors. The back-gate bias is introduced to the SRAM circuits and acquires high operating margin and high-speed operation under low supply voltage. The leakage current in stand-by state is reduced. This SRAM achieves 30% faster writing time under low-voltage operation and 90% less stand-by power     

Dynamic mechanical properties of photopolymerizable poly(vinyl alcohol)–acrylate monomer blends

Dynamic mechanical properties of photopolymerizable poly(vinyl alcohol) (PVA)–monoacrylate blends were investigated by measuring dynamic shear modulus G′ and loss tangent, tan δ. The dynamic mechanical properties of the blends before being exposed to UV irradiation were governed by the weight percent of the monomers which act as plasticizers. On the other hand, the UV-irradiated blends seemed to be typical two-phase materials since they revealed two tan δ maxima whose positions were independent of the monomer content. Those two maxima were assigned to PVA and photopolymerized acrylates with reference to the dynamic mechanical data of PVA and a PVA-polyacrylamide polyblend. Those dynamic mechanical data suggested that insolubilization of the blend type photopolymers should be caused by a decrease in solubility due to graft polymerization of acrylate monomers onto PVA.     

Chemical Recognition of Partner Plant Species by Foundress Ant Queens in Macaranga–Crematogaster Myrmecophytism

The partnership in the Crematogaster–Macaranga ant–plant interaction is highly species-specific. Because a mutualistic relationship on a Macaranga plant starts with colonization by a foundress queen of a partner Crematogaster species, we hypothesized that the foundress queens select their partner plant species by chemical recognition. We tested this hypothesis with four sympatric Macaranga species and their Crematogaster plant-ant species. We demonstrated that foundress Crematogaster queens can recognize their partner Macaranga species by contact with the surface of the seedlings, that they can recognize compounds from the stem surface of seedlings of their partner plant species, and that the gas chromatographic profiles are characteristic of the plant species. These findings support the hypothesis that foundress queens of the Crematogaster plant-ant species select their partner Macaranga species by recognizing nonvolatile chemical characteristics of the stem surfaces of seedlings.     

Photocatalytic Inactivation of Legionella Pneumophila and an Aerobic Bacteria Consortium in Water over TiO2/SiO2 Fibres in a Continuous Reactor

A continuous photoreactor, working in a total recycle mode and irradiated by a low-pressure Hg lamp, has been used to study the bactericidal effect of a photocatalyst, formed by TiO₂ embedded in SiO₂ fibres, on Legionella pneumophila and a consortium of common gram-negative aerobic bacteria: (Escherichia coli, Klebsiella sp., Pseudomona sp. and Proteus sp.) in water. The kinetic modeling of the inactivation process, carried out with the measured values of viable bacteria concentration at the outlet of photoreactor, evidenced that for each pass inside the photoreactor the ratio between the outlet and inlet cell concentrations was of order of 0.01 for the inactivation of L. pneumophila. For the other aerobic bacteria, which are usually taken as reference in photocatalytic bacteria inactivation studies, this ratio was of order of 0.3 for the first hour of illumination, while upon prolonged irradiation (up to 9 h) this ratio increased to 0.7. Several factors inducing this latter decrease of efficiency are possible, as e.g. competition for photocatalytic attack between microorganisms and organic compounds released by damaged bacteria or photoinduced alteration of a small fraction of still viable bacteria making them less interactive with the photocatalyst. The inactivation mechanism normally proposed for common bacteria involves an initial attack of the photogenerated radicals to the outer membrane; the consequent membrane dispersion allows the radicals to damage the cytoplasmic membrane. The higher lethality of the photocatalytic method observed towards Legionella: (in comparison to the other aerobic bacteria) is explained considering that the radicals attack the Legionella secretion system, which is adapted for high virulence and would become activated for and through adhesion to the TiO₂ surface. This attack would then be able to inactivate L. pneumophila without dispersing the outer membrane. Apart from this, the water flow through the catalyst fibres can facilitate the bacteria transport towards the anatase surface, and additionally the generated shear stress may help adhesion, at least for some bacteria as E. coli, contributing further to improve the photokilling efficiency; both factors may contribute to the efficiency of this photoreactor configuration.     

Study of prevention of solidification cracking in Al‐Mg‐Si alloy laser welds. CO2 laser welding of Al‐Mg‐Si alloys (1st report)

The choice of weld bead size in the case of welded cruciform joints can be problematic, especially when the sheets forming the joint are of differing thickness. Technological standards generally recommend a weld bead thickness less than the minimum thickness of the sheets to be joined, whereas structural standards do not envisage any dependency between joint static and fatigue strength and weld bead dimensions, unless these are so reduced as to lead to failure starting and propagating in the weld bead itself rather than the base metal plates. The scope of this study is the theoretical and experimental analysis of the change in fatigue strength with varying weld bead thickness and minimum welded plate thickness.     

Ferroelectric properties of ultrathin films of Nylon 11

Ferroelectric properties of ultrathin films of Nylon 11 were investigated. The thickness was in the range of 25 to 55 nm. Ferroelectric response was largely affected by thermal annealing and following cooling conditions. Thermal annealing at higher temperature followed by quenching in liquid nitrogen gave larger remanent polarization and smoother surface, whereas cooling down in an ambient atmosphere caused smaller remanent polarization and rough surface. Surface roughness strongly affected the polarization reversal and remanent polarization. Hydrogen bonding in crystal was also significantly related to the polarization reversal and thus remanent polarization.