Enhancement of glass-ceramic performance by TiO2 doping: In vitro cell viability,proliferation, and differentiation

A new TiO₂-containing bioactive glass and glass-ceramics based on 50SiO₂-(45-X)CaO-(XTiO₂)-5P₂O₅ system was designed using a sol–gel technique (where X = 5, 7.5 and 10 wt %). The roles of the crystallization behavior and physicochemical characteristics of the designed glass and glass-ceramics which were played in the introduction of TiO₂ substitutions were investigated. Moreover, cell proliferation and differentiation were evaluated against human osteosarcoma cells (Saos-2). The TiO₂/CaO replacements led to the formation of a stronger glass structure and thus increased thermal parameters and the chemical stabilization of the designed materials. The FTIR data confirmed the existence of Ti within the glass and glass-ceramics samples, and no remarkable effect on their chemical integrity was observed. The XRD patterns indicated that calcium-containing minerals, including Ca₂SiO₄,Ca₃(PO₄)₂, Ca(Ti,Si)O₅, CaTiSiO₅, and Ca₁₅(PO₄)₂·(SiO₄)₆ phases were developed as a role of structure/texture under the applied heat-treatment. The results of the cytotoxicity test proved that a safe sample dose is 12–50 μg/ml, at which cell viability is ≥ 85%. The cell differentiation determined by ALP test proved the superiority of glass-ceramics compared with their native glasses. Therefore, the obtained materials could be safely used as novel biocompatible materials for the regeneration of bone tissue.     

The Impact of PbF2-Based Glasses on Radiation Shielding and Mechanical Concepts: An Extensive Theoretical and Monte Carlo Simulation Study

Journal of Inorganic and Organometallic Polymers and Materials - This work aimed to investigate the impact of Lead-fluoride based glasses via theoretical and simulation techniques on mechanical and...     

Regulator problem for uncertain linear discrete-time systems with constrained control

A necessary and sufficient condition to test the robustness of a regulator of uncertain linear systems with constrained control is given. The candidate regulator for this test is that stabilizing nominal systems. An illustrative example is also given.     

Thermodynamic approach of inflation process of K‐BKZ polymer sheet with respect to thermoforming

The problem of modeling and the dynamic finite element simulation of thermoforming process for viscoelastic sheet are considered. The pressure load used in modeling is thus deduced from the thermodynamic law of ideal gases. The viscoelastic behavior of the K‐BKZ model is considered. The Lagrangian formulation together with the assumption of the membrane theory is used in the finite element implementation. The numerical validation is performed by comparing the theoretical solution for the uniaxial and equibiaxial hencky deformation with numerical results. Moreover, the influence of the K‐BKZ constitutive model, for three linear time distribution of airflow rate loading, on the thickness and on the stress distribution in thermoforming of containers made of HDPE are analyzed. POLYM. ENG. SCI., 45:1319–1335, 2005. © 2005 Society of Plastics Engineers     

Capacity planning in job-shop environment

Presented here is a computerized capacity planning system for the IBM Microcomputer family. The system maintains the profile of the job shop in a data base along with data pertinent to various products that can be manufactured in the shop. Projected orders for the planning period are input to the system with their associated quantities and delivery dates. The system uses the forward and backward loading rules in generating capacity loading scenarios. User selects the best course of action which may satisfy delivery dates subject to the limitations of the work centers. Efficiency figures are provided to aid the user in his/her decision.     

Dark Current and Signal-to-Noise Ratio in BDJ Image Sensors

In this paper, analytical expressions of dark currents and equivalent noise generators of a CMOS color image sensor are presented, and the signal-to-noise ratio (SNR) at both outputs is evaluated. Static measurements and simulations on Austria Micro Systems 0.35-mum CMOS test structures yield guidelines to increase the SNR of the buried double junction photodetector     

Recruitment strategies in the women's health trial: feasibility study in minority populations. WHT:FSMP Investigators Group. Women's Health Trial:Feasibility Study in Minority Populations

The Women's Health Trial:Feasibility Study in Minority Populations (WHT:FSMP) examined the feasibility of recruiting postmenopausal women from a broad range of racial and socioeconomic backgrounds into a primary prevention trial requiring marked reductions in dietary fat. Postmenopausal women aged 50-79 yr who had no history of cardiovascular disease or cancer and who consumed 36% or more total energy from fat qualified to participate. We randomized the women into dietary intervention (60%) or control (40%) groups; we aimed to randomize 750 women in 18 months in each of the three clinical centers. All centers achieved goals for randomization based on ethnicity, and two centers exceeded overall recruitment goals. The greatest source of randomized participants was mass mailing, followed by items in the media, referrals, and community outreach. Recruitment yields were generally similar for the ethnic groups but lower for less-educated participants. The experience of WHT:FSMP indicates that postmenopausal women from the African-American, Hispanic, and non-Hispanic white communities can be recruited into dietary intervention studies for the prevention of disease.     

Converting Daily Rainfall Data to Sub-daily—Introducing the MIMD Method

One of the most important analysis in many hydrological and agricultural studies is to convert the daily rainfall data into sub-daily (hourly) because in many rainfall stations, only the daily rainfall data are available and for a comprehensive rainfall analysis, these data should be converted to sub-daily. Many experimental and analytical methods are available for this conversion but one of the simplest yet accurate ones has been proposed by the Indian Meteorological Department (IMD). Since the IMD method has shown low accuracy in some regions, in this study, the IMD method is modified to a single parameter equation, called Modified Indian Meteorological Department (MIMD) in order to improve the accuracy of the conversion. For this reason, the parameter is calibrated so that the maximum correlation between observed and estimated values is achieved. Five stations in different regions with different climatic conditions were selected so that the daily and sub-daily rainfall data were available in each of them. Then, the parameter of the MIMD method was derived for each station. The results were compared with both observed data and IMD method and it was shown that the mean correlation coefficient of MIMD and IMD methods were 0.9 and 0.73 respectively for 12-h rainfall depth which indicated that the accuracy of the MIMD method in estimation of sub-daily rainfall depths was significantly increased. Moreover, the results showed that the accuracy of the MIMD method decreases as rainfall duration decreases.

     

Calcium carbonate and ammonium polyphosphate flame retardant additives formulated to protect ethylene vinyl acetate copolymer against fire: Hydrated or carbonated calcium?

In this study, the effect of the chemical nature of different calcium (Ca)-based minerals as flame retardant additives in combination with ammonium polyphosphate (APP), in 1:1 proportions, on the flame retardancy behavior and performance of ethylene vinyl acetate copolymer was discussed. Combining APP with partly and completely hydrated calcium oxide led to superior flame-retardant function detected in mass loss calorimeter measurements with respect to the corresponding system containing carbonated calcium. This privileged character was attributed to the higher reactivity of hydrated Ca-based fillers toward APP in comparison with Ca carbonate, which induced the formation of an intumescent residue. The difference between reactivity potential of hydrated and dry Ca was demonstrated by the newly formed thermally stable species, and further evidenced by thermogravimetric analysis performed on APP/fillers blends. Moreover, the presence of more crystalline domains in the Ca/phosphorus-based compounds was evidenced by XRD analysis of the mass loss calorimeter test residues. The results of this work highlight the role of blend additive systems on the performance of flame retardancy of polymer materials.     

Combustion synthesis of NbC/ZrO2 composites: Influence of Cr additives on the microstructure and mechanical properties

Composites of NbC/ZrO₂ reinforced with different weight ratios of Cr metal were prepared by dynamic compaction combustion from a blend of Nb₂O₅–Zr–Cr powders. Factors controlling the synthesis process, the microstructure, and the mechanical properties of the samples, such as Cr wt% and the compression loads were studied. The samples were characterized by XRD, SEM, porosity, and hardness measurements. The porosity value of the sample with no additives was high and reached 31.6 vol%. A sudden decrease in the sample porosity to 2.4 vol % was noticed for the sample containing 3.0 wt% of Cr. A high-density sample with less than 2.0 vol % porosity and maximum hardness of 1038 HV was produced using 5.0 wt% Cr under 300 MPa compression load. Detailed thermodynamic calculations for the effect of Cr additives on the physicochemical properties of the system were introduced.