The sub-rating channel assignment strategy for PCS hand-offs

A new personal communications services (PCS) hand-off scheme is proposed. This scheme provides for hand-off to radio ports on which there is no free channel by “sub-rating” an existing connection. With sub-rating, an occupied full-rate channel is temporarily divided into two half-rate channels: one to serve the existing call and the other to serve the hand-off request. The blocking probabilities (combined forced terminations of existing calls and blocking of new call attempts) of this new scheme compare favorably with the standard scheme (nonprioritizing) and the previously proposed prioritizing schemes. The costs for this scheme are presented and discussed, as well as the additional procedural complexity of implementing on-the-fly sub-rating and the impact of continuing the conversation on a lower rate channel (which may lower speech quality of increase battery drain). Analytical models and simulations investigating the traffic impacts are presented, as are the results that show that even in the highest offered load considered a 3-min conversation in the busy hour experiences less than half a second of sub-rated conversation on average and only about 3% of the calls experience more than 5.12 s of sub-rated conversation. This scheme can increase capacity by 8-35% for systems with 1% call incompletion probability     

A push mechanism for GPRS supporting private IP addresses

The General Packet Radio Service (GPRS) provides a packet switched data service for mobile users. However, the existing GPRS specification does not provide the push mechanism and it is difficult to support GPRS services such as call termination (incoming call) for wireless voice over IP (VoIP). Based on the short message service, this paper proposes a push mechanism for GPRS supporting private IP addresses. Our approach does not need to modify the existing GPRS structure.     

Implicit deregistration in a PCS network

Registration/deregistration is required in a PCS network when a portable moves between registration areas. Several schemes were proposed to deregister a portable after it moves out of a registration area (RA). A simple scheme called implicit deregistration totally eliminates network traffic due to deregistration. However, this scheme may delete valid registration records. Thus, the size of a registration database must be sufficiently large to ensure low probability that a valid registration record is deleted. This paper describes an analytic model to determine the size k of the registration database for an RA in the implicit deregistration scheme. If the expected number of portables in an RA is N, then our study indicates that good performance can be achieved if k≃5N     

A comparison study of the two-tier and the single-tier personal communications services systems

A two-tier PCS system integrates the high tier PCS system and the low tier PCS systems into a single system to provide the advantages of both tiers. Such a system is expected to provide better service (more available and more cost effective to the users) at the expense of the extra tier switching management. We compare the performance of the two-tier PCS system and the single low tier system in two aspects: the registration traffic and the service availability. Because of the tier management, the two-tier system generates more registration traffic than the single low tier system. Under the range of the input parameters in our study, we show that the two-tier system generates less than 10% extra registration traffic than the single low tier system in most cases and generates less than 20% registration traffic in the worst cases. It is clear that for the service availability, the two-tier system is better than the single one tier system. We also study the probability that a call is forced terminated in the single low tier system because the low tier becomes unavailable during the call (such a call can be continued in the two-tier system).     

Comparison of solution intercalation and melt intercalation of polymer-clay nanocomposites

Polymer-clay nanocomposites of poly(ethylene oxide)/Na-montmorillonite (PEO/MMT) and PEO/organo-modified bentonite (B34) systems prepared via solution intercalation and melt intercalation have been compared by X-ray diffraction and Fourier transform infrared (FTIR) analysis. The gallery size of solution-intercalated hybrids in both PEO/MMT and PEO/B34 systems increases with PEO content up to a plateau level at 15%. However, the gallery size of melt-intercalated PEO/MMT and PEO/B34 hybrid remains the same regardless of the PEO concentration. FTIR analysis shows no difference in spectrum of samples prepared by solution intercalation compared to melt intercalation. The PEO conformation in the PEO/clay intercalated hybrids is concluded to be a distorted helical structure.     

Multifunctional Organic Potassium Salt Additives as the Efficient Defect Passivator for High-Efficiency and Stable Perovskite Solar Cells

Despite the rapid developments are achieved for perovskite solar cells (PSCs), the existence of various defects in the devices still limits the further enhancement of the power conversion efficiency (PCE) and the long-term stability of devices. Herein, the efficient organic potassium salt (OPS) of para-halogenated phenyl trifluoroborates is presented as the precursor additives to improve the performance of PSCs. Studies have shown that the 4-chlorophenyltrifluoroborate potassium salt (4-ClPTFBK) exhibits the most effective interaction with the perovskite lattice. Strong coordination between  BF₃⁻/halogen in anion and uncoordinated Pb²⁺/halide vacancies, along with the hydrogen bond between F in  BF₃⁻ and H in FA⁺ are observed. Thus, due to the synergistic contribution of the potassium and anionic groups, the high-quality perovskite film with large grain size and low defect density is achieved. As a result, the optimal devices show an enhanced efficiency of 24.50%, much higher than that of the control device (22.63%). Furthermore, the unencapsulated devices present remarkable thermal and long-term stability, maintaining 86% of the initial PCE after thermal test at 80 °C for 1000 h and 95% after storage in the air for 2460 h.     

Voice over wireless local area network

This paper introduces the special issue on voice over wireless local area networks (VoWLAN), which aim to foster interaction among researchers from both academia and industry in networking, wireless communications, and mobile computing. The special issue includes an article investigating the issue of determining an appropriate pricing strategy for VoWLAN provisioning. Also featured are two articles on polling as a solution for supporting real-time traffic over WLANs and another on media optimization network architecture (MONA).     

Ultrafast-laser-treated poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) electrodes with enhanced conductivity and transparency for semitransparent perovskite solar cells

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is an important organic electrode for solution-processed low-cost electronic devices. However, it requires doping and post-solvent treatment to improve its conductivity, and the chemicals used for such treatments may affect the device fabrication process. In this study, we developed a novel route for exploiting ultrafast lasers (femtosecond and picosecond laser) to simultaneously enhance the conductivity and transparency of PEDOT:PSS films and fabricate patterned solution-processed electrodes for electronic devices. The conductivity of the PEDOT:PSS film was improved by three orders of magnitude (from 3.1 to 1024 S·cm^–1), and high transparency of up to 88.5% (average visible transmittance, AVT) was achieved. Raman and depth-profiling X-ray photoelectron spectroscopy revealed that the oxidation level of PEDOT was enhanced, thereby increasing the carrier concentration. The surface PSS content also decreased, which is beneficial to the carrier mobility, resulting in significantly enhanced electrical conductivity. Further, we fabricated semitransparent perovskite solar cells using the as-made PEDOT:PSS as the transparent top electrodes, and a power conversion efficiency of 7.39% was achieved with 22.63% AVT. Thus, the proposed route for synthesizing conductive and transparent electrodes is promising for vacuum and doping-free electronics.     

Ca-α SiAlON hollow spheres prepared by carbothermal reduction–nitridation from different SiO2 powders

The formation process of hollow spheres composed of nanosized Ca-α SiAlON particles was investigated using SiO₂ starting powders with different characteristics in particle size, shape and crystalline state. TEM observations showed Ca-α SiAlON hollow spheres composed of a large number of nanosized particles in the products prepared at 1450 °C for 120 min in nitrogen. In all systems, the Ca-α SiAlON hollow spheres were always produced through an intermediate Si–Al–Ca–O liquid phase in the same mechanism, regardless of the characteristics of SiO₂ starting powders used. Spherical solid particles consisted of amorphous phase containing Si, Al, Ca, O and a small amount of N were generated at the initial stage of carbothermal reduction–nitridation. These spherical solid particles changed into hollow particles with the progression of the reaction from the liquid phase to the crystalline Ca-α SiAlON with increasing temperature.     

Investigation of the ceramifying process of modified silicone–silicate compositions

Glass frits were added into silicone-based composites with the aim to improve low temperature ceramification at elevated temperatures. The effect of glass frits on the properties of ceramic residue is investigated. Field emission scanning electron microscopy (FESEM), electron probe microchemical analysis (EPMA) and X-ray diffraction analysis (XRD) showed that glass frits reacted via a eutectic reaction with mica and silica. Electrical conductivity measurements at elevated temperatures showed a decline in volume resistivity with glass frit addition. It was concluded that increased conductivity is a result of ionic conduction of the glass phase produced by eutectic reactions between frits, silica and mica at high temperatures. Thermal mechanical analysis (TMA) was used to explore the dimensional changes of these composites during programmed heat treatment.