Improving storability,physiological disorders,and antioxidant properties of ‘Bartlett’ and ‘d’Anjou’ pears (Pyrus communis L.) by pre-harvest 1-methylcyclopropene spraying

Ethylene continues to be a major factor influencing quality of European pears during storage. Although research has been done on the effect of pre-harvest 1-methylcyclopropene (1-MCP) on physiological characteristics in pears, a full understanding of cultivar response and antioxidant metabolism remains elusive. Spraying 1-MCP on ‘Bartlett’ and ‘d’Anjou’ pears was studied with respect to physiology, storage and eating quality, disorders, and antioxidant properties at two harvest date (H1 and H2) during storage and ripening. Treatment with 1-MCP extended the harvest window of ‘Bartlett’ and ‘d’Anjou’ pears 3 and 4 days, respectively, without reducing storage or eating quality. Treatment with 1-MCP reduced ethylene production (EPR) and respiration rates (RR), maintained fruit firmness and green colour during storage and retarded development of desirable melting texture in both cultivars. Additionally, 1-MCP lowered the incidence of disorders by alleviating membrane lipid peroxidation, retaining high total flavonoids (TF) and antioxidant capacity, and enhancing superoxide dismutase (SOD), catalase (CAT) and ascorbate peroxidase (APX) activity in both cultivars. Overall, pre-harvest 1-MCP applications could extend storage time of ‘Bartlett’ and ‘d’Anjou’ pears to 5 and 6 months, respectively, at −1.1 ± 0.5 °C, by reducing ethylene synthesis and enhancing antioxidant metabolism.     

Ni-Mo-O催化剂中协同作用对丙烷氧化脱氢的影响

在 Ni-Mo-O体系中 ,加入 Mo O3 能极大地提高丙烷氧化脱氢制丙烯的反应活性。选用固混法、沉淀法、柠檬酸法制备了 Mo O3 过量 1 5 % (摩尔分数 )的α -Ni Mo O4催化剂 ,其中用沉淀法制得催化剂在 5 0 0℃ ,V( C3 H8) /V ( O2 ) /V ( N2 ) =1 0 /1 0 /5 0 ,反应气流量为 70 m L/min的条件下丙烷转化率可达 38.7% ,丙烯选择性达 70 .1 4 %。经 XRD,XPS,TPR表征说明 ,在含有过量 Mo O3 的催化剂中 ,α -Ni Mo O4与 Mo O3 两种晶体之间可产生微小的相互吸引 ;从而发挥协同作用 ,是提高催化剂活性     

基于STM32的逆变弧焊电源控制器设计

数字化是弧焊电源的发展趋势,其关键在于控制器的数字化。目前市场上的大多数数字化产品价格相对高昂,采用STM32系列单片机进行经济型数字化弧焊电源控制器的设计和实现。该控制器采用数字式PI方法进行输出电流控制,并具有按键操作、液晶显示、过流保护、过热保护等功能。该控制器还具有良好的扩展I}生,可以通过修改程序增强系统功能。     

Ti-26高强钛合金斜轧穿孔工艺研究

研究了Ti-26高强钛合金斜轧穿孔制备管坯工艺。测试了穿制的Ti-26合金管坯的力学性能，用金相显微镜观察了管坯的显微组织，用扫描电镜分析了拉伸断口的形貌。结果表明，采用斜轧穿孔方式完全可以制备Ti-26高强钛合金管坯；在1050℃下，选择合适的轧辊转速和前进角可顺利穿制Ti-26高强钛合金管坯，其管坯的强度为815MPa，延伸率达到13％，断面收缩率达到45％，晶粒度按ASTME标准为6级，比穿孔前细化，断口呈明显的塑性断口，加工管材无需热处理可以直接进行轧制，道次加工率可达45．8％。     

PN—101纸张阻燃剂的研制及应用

采用含磷、含氮化合物，复配制备ＰＮ－１０１纸张阻燃剂；采用该品阻燃处理的纸张，阻燃性能优良，耐热性能好，强度有所增加。     

空气气氛中烧成Si3N4-SiC复合材料的性能、相组成和显微结构

以氮化硅细粉(粒度＜0.088 mm,w(β-Si3N4)＞95%)、碳化硅(w(SiC)＞98%,粒度分别为2.8～0.9mm、0.9～0.15 mm、＜0.115 mm和＜0.063 mm四级)、硅粉(粒度＜0.045 mm,w(Si)＞98%)和硅灰(w(SiO2)=98.3%)为原料,以木质素磺酸钙水溶液作成型结合剂,采用150 MPa的压力成型为65 mm×114 mm×230mm的Si3N4-SiC、Si3N4-SiC-Si和Si3N4-SiC-SiO2三种试样.在空气气氛中,以50℃·h-1的升温速度升至800℃保温4 h,再升至1450℃保温2 h,自然冷却至室温后,测定烧成后试样的常温耐压强度、常温抗折强度、1400℃下的高温抗折强度、显气孔率、体积密度和残氮率,并采用XRD、SEM和EPMA等手段分析烧后试样的相组成和显微结构.结果表明3种试样在空气气氛中烧成后的高温(1400℃)和常温抗折强度都比较高,显气孔率都比较低,而耐压强度则以Si3N4-SiC试样的最高;烧成后试样中心区域的残氮率以Si3N4-SiC-Si试样的最高,Si3N4-SiC-SiO2试样的次之,Si3N4-SiC试样的最小;在空气气氛中烧成后,Si3N4-SiC试样中的Si3N4分解较多,SiC-Si3 N4-Si试样的表面和内部都明显含有单质Si,SiC-Si3N4-SiO2试样表面区域的Si2N2O晶体发育很好,而内部区域的晶体发育较小.     

Bi:YIG纳米薄膜的磁光特性

用射频磁控溅射和快速退火方法制备了纳米量级的Bi:YIG薄膜,研究了薄膜的磁光特性.当晶粒尺寸从150 nm降到80 nm时,透射率和Faraday角的值分别从75%和3.6°变成了80%和4.0°.结果表明:高的透射率和大Faraday角可以在晶粒尺寸为纳米量级的薄膜中共存.     

脱硫石膏－粉煤灰活性掺合料设计及水化特性

针对电厂两大工业废渣--烟气脱硫石膏及粉煤灰,通过试验研发用于混凝土的活性复合矿物掺合料.以适当比例复合后的脱硫石膏及粉煤灰等量取代水泥掺入到水泥砂浆中,通过活性激发措施,以胶砂流动度、早期强度以及强度发展规律等作为控制指标探索脱硫石膏及粉煤灰的最优配比,同时通过微细观结构的SEM观测评价脱硫石膏-粉煤灰活性矿物掺合料在水泥基材料中的作用效应.结果表明,脱硫石膏及粉煤灰以1:2的比例复合等量取代水泥30%掺入水泥砂浆中,可获得较为优异的胶砂流动度、早期强度,而后期强度能赶上甚至超过基准水泥胶砂;SEM表明由于脱硫石膏及其它外加组分的活性激发效应,粉煤灰的活性得到有效激发,早期有明显的钙矾石生成.脱硫石膏-粉煤灰复合矿物掺合料的研发可大量消纳燃煤电厂的工业废渣,且在水泥基材料体系中具有优异的水化及低成本特性,具有显著的"绿色"效应,符合中国"可持续发展"的战略要求.     

Consolidation and microstructures of microwave sintered W-25Cu alloys with Fe addition

W-25Cu alloys were microwave sintered in a 2.45 GHz multimode applicator. The densification, microstructure and their dependence on sintering mode and Fe addition were investigated in detail. Owing to the volumetric heating intrinsic in microwave processing, a microstructure with larger W grain size in center regions was observed as against larger grain size in edge regions for conventional sintering. Microwave sintering demonstrates its intrinsic advantages such as rapid heating rate, densification enhancement and microstructural homogeneity; but it undesirably promotes W grain growth. Under microwave sintering, the role of Fe addition on compact consolidation is not so substantial as under conventional sintering. Moreover Fe degrades the microstructural quality, generating worse uniformity and coarser W grains.     

P-糖蛋白基因疫苗的构建与鉴定

目的　制备P 糖蛋白基因疫苗。方法　利用PCR方法扩增编码人类P 糖蛋白多药耐药基因序列胞外区约 1kb片段 ,与真核表达载体pcDNA3进行定向重组 ,限制性内切酶BamHI和XhoI双酶切反应及测序鉴定该重组基因疫苗 ,磷酸钙共沉淀法转染人类K5 62红白血病细胞 ,经G418筛选后 ,免疫组化分析该重组基因疫苗表达产物的抗原特异性。结果　构建了pcDNA3 MDR1重组基因疫苗。限制性内切酶BamHI和XhoI双酶切分别显示 5 .4kb的载体片段及约 1kb的插入序列 ,测序 948个碱基中除 2个碱基突变外均与原序列排列相符。免疫组化方法证实细胞膜表面MDR1约 1kb片段的表达产物可被抗Pgp抗体识别。结论　构建的pcDNA3 MDR1重组基因疫苗可被市售的Pgp抗体特异性识别 ,具有Pgp抗原特异性