470-MHz–698-MHz IEEE 802.15.4m Compliant RF CMOS Transceiver

This paper proposes an IEEE 802.15.4m compliant TV white-space orthogonal frequency-division multiplexing (TVWS)-(OFDM) radio frequency (RF) transceiver that can be adopted in advanced metering infrastructures, universal remote controllers, smart factories, consumer electronics, and other areas. The proposed TVWS-OFDM RF transceiver consists of a receiver, a transmitter, a 25% duty-cycle local oscillator generator, and a delta-sigma fractional-N phase-locked loop. In the TV band from 470 MHz to 698 MHz, the highly linear RF transmitter protects the occupied TV signals, and the high-Q filtering RF receiver is tolerable to in-band interferers as strong as −20 dBm at a 3-MHz offset. The proposed TVWS-OFDM RF transceiver is fabricated using a 0.13-μm CMOS process, and consumes 47 mA in the Tx mode and 35 mA in the Rx mode. The fabricated chip shows a Tx average power of 0 dBm with an error-vector-magnitude of < 3%, and a sensitivity level of −103 dBm with a packet-error-rate of < 3%. Using the implemented TVWS-OFDM modules, a public demonstration of electricity metering was successfully carried out.     

Novel Hybrid Content Synchronization Scheme for Augmented Broadcasting Services

As a new hybrid broadcasting service, augmented broadcasting shows enhanced broadcasting content on a large TV screen, while augmented reality (AR) on a mobile device augments additional graphical content onto an input image from the device's own camera to provide useful and convenient information for users. A one‐sided broadcasting service using AR has already been attempted in virtual advertisements during sport broadcasts. However, because its augmentation is preprocessed before the video image is transmitted, the viewer at home may have no influence on this formation; and no interaction for the user is possible unless the viewer has a direct connection to the content provider. Augmented broadcasting technology enables viewers to watch mixed broadcasting content only when they want such service and to watch original broadcasting content when they do not. To realize an augmented broadcasting service, the most important issue is to resolve the hybrid content synchronization over heterogeneous broadcast and broadband networks. This paper proposes a novel hybrid content synchronization scheme for an augmented broadcasting service and presents its implementation and results in a terrestrial DTV environment.     

A traffic grooming problem of SONET-WDM rings

In this paper, we present a traffic grooming problem of the SONET-WDM ring. The objective is to minimize the total cost of optical add-drop multiplexers (OADMs) and inter-ring hub equipment, while satisfying intra-ring and inter-ring capacities. We develop integer programming (IP) formulations for the problem and devise some reformulations for enhancing the mathematical representation of the proposed IP model. By investigating the polyhedral structure of the problem, we develop some valid inequalities that provide a tight lower bound for the problem. Dealing with the inherent computational complexity of the problem, we also devise an effective tabu search procedure for finding a feasible solution of good quality within reasonable computation time. Computational results are provided to demonstrate the relative strength of the proposed formulations, and to reveal the efficacy of the lower and upper bound procedures for solving the problem.

Data security in unattended wireless sensor networks with mobile sinks

Unattended wireless sensor networks operating in hostile environments face the risk of compromise. Given the unattended nature, sensors must safeguard their sensed data of high value temporarily. However, saving data inside a network creates security problems due to the lack of tamper‐resistance of sensors and the unattended nature of the network. In some occasions, a network controller may periodically dispatch mobile sinks to collect data. If a mobile sink is given too many privileges, it will become very attractive for attack. Thus, the privilege of mobile sinks should be restricted. Additionally, secret keys should be used to achieve data confidentiality, integrity, and authentication between communicating parties. To address these security issues, we present mAKPS, an asymmetric key predistribution scheme with mobile sinks, to facilitate the key distribution and privilege restriction of mobile sinks, and schemes for sensors to protect their collected data in unattended wireless sensor networks. Copyright © 2011 John Wiley & Sons, Ltd.     

Transmission of Traffic Information Using a Terrestrial Digital Multimedia Broadcasting System

This letter introduces an efficient transmission of traffic information through a terrestrial digital multimedia broadcasting system, which is a multimedia and mobility empowered option of the European digital audio broadcasting system. By adapting Korean characteristic traffic information into the transport protocol expert group messages in the traffic information delivery, a highly efficient traffic information system was implemented and tested in Korea.     

Kinematics, kinetics and muscle activities of the lower extremity during the first four steps from gait initiation to the steady-state walking

In this study, biomechanical characteristics during the whole process of gait initiation for twenty normal healthy volunteers were determined by the motion analysis with six near-infrared cameras, four forceplates, and an EMG system. Gait initiation, a transitional movement phenomenon from quiet stance to steady-state walking, involves a series of muscular activities, GRFs, movements of COP and COM, and joint motions. Results showed that the location of the net COP to be most lateral during double limb stance at the beginning of gait initiation. During gait initiation, changes in anteroposterior components of GRFs were first found and then changes in vertical components followed. Hip and knee motions were found before the ankle joint motion. Walking speed, step length, and stride length gradually increased until the second step. The interaction between the COM and COP is tightly regulated to control the trajectory of the COM and thereby control total body balance. This paper was recommended for publication in revised form by Associate Editor Hong Hee Yoo Sun-Woo Park received a B.S. degree in Biomedical Engineering from Yonsei University in 2006. He is currently a M.S. candidate in the Department of Biomedical Engineering, Yonsei University, Korea. His research interests in the area of Human Movement and detection of gait phase using motion sensors. Hue-Seok Choi received a B.S. degree in Computer Engineering from Daejeon University in 2004. He is currently a P.D. candidate at the Department of Biomedical Engineering at Yonsei University, Korea. His research interests are in the area of Human Movement and Rehabilitation Engineering. Ki-Hong Ryu received a B.S. and M.S. degrees in Biomedical Engineering from Yonsei University in 1998 and 2001, respectively. He is currently a P.D. candidate in the Department of Biomedical Engineering, Yonsei University, Korea. His research interests are in the area of Human Movement and Gait Training System using Functional Electrical Stimulation. Sa-Yup Kim received a B.S. degree in Electrical Engineering from Yeungnam University in 2002 and M.S. degrees in Biomedical Engineering from Yonsei University in 2006. He is currently working from Korea Institute of Industrial Technology in Cheonan, Korea. Young-Ho Kim received a B.S. degree in Mechanical Engineering from Hanyang University in 1982. He then went on to receive his M.S. and Ph.D. degrees from University of Iowa in 1989 and 1991, respectively. He is currently a Professor in the Department of Biomedical Engineering, Yonsei University, Korea. His research interests are in the area of Human Movement, Rehabilitation Engineering, and Biomechanics.     

The effects of residual polymerization solvent on the physical properties of poly(2‐cyano‐p‐phenylene terephthalamide)

Poly(2‐cyano‐p‐phenylene terephthalamide) (CY‐PPTA) was obtained by the polycondensation of terephthaloyl dichloride and 2‐cyano‐p‐phenylene diamine in the mixture of N‐methyl‐2‐pyrrolidone (NMP) and calcium chloride (CaCl₂). Washing the polymerized product with water and drying at the elevated temperature inevitably left a small amount of polymerization residues which could be eliminated only by additional washing with acetone. The thermogravimetric and ¹H‐/¹³C‐NMR analyses revealed that the residues were largely composed of NMP which existed as a complex with the polymer. The complex was broken up between 200 and 300 °C and evolved 5 wt % of gaseous products, which had an adverse effect on the physical properties of as‐spun CY‐PPTA fibers obtained by dry jet‐wet spinning. The heat treatment of the as‐spun fibers including residual NMP exhibited some porous morphology on the fiber surface due to the evolved gases. However, the existence of the residual NMP had little effect on the intrinsic viscosity and liquid crystalline phase behavior of the polymer. Both rheological and optical properties exhibited the critical concentration at 3 wt % with the clear schlieren texture of nematic liquid crystalline phase. The inclusion of residual NMP decreased dynamic viscosity and yield stress. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43672.     

Bubble Dynamics,Flow, and Heat Transfer during Flow Boiling in Parallel Microchannels

Significant efforts have recently been made to investigate flow boiling in microchannels, which is considered an effective cooling method for high-power microelectronic devices. However, a fundamental understanding of the bubble motion and flow reversal observed during flow boiling in parallel microchannels is lacking in the literature. In this study, complete numerical simulations are performed to further clarify the boiling process by using the level-set method for tracking the liquid–vapor interface which is modified to treat an immersed solid surface. The effects of contact angle, wall superheat, and the number of channels on the bubble growth, reverse flow, and heat transfer are analyzed.     

An ATM Switch Capacity Allocation Problem

In this paper, we consider a capacity allocation problem arising in the context of deploying asynchronous transfer mode (ATM) networks. Given types of ATM switches, the problem is to find an optimal allocation of capacity such that the total cost of installed switch modules is minimized, while satisfying all traffic demands. We formulate the problem as an integer programming model, which can be conceptualized as a generalized bin packing problem with capacity constraints. We then develop a surrogate constraint technique of the formulation for enhancing the representation of the model. Guided by the tight lower bound of the surrogate relaxation, we devise an effective tabu search heuristic that provides good quality solutions with guaranteed optimality. We present promising computational results that show the viability of the proposed heuristic and lower bounding methods, and that provide insights into implementation for configuring ATM switch in practice.