Role of Nd-Ni on structural,spectral and dielectric properties of strontium-barium based nano-sized X-type ferrites

The influence of neodymium and nickel substitution on structural and dielectric parameters was investigated in strontium-barium X-type hexagonal ferrites having composition SrBaCu_2?xNi_xNd_yFe_28?yO₄₆ (x = 0, 0.2, 0.4, 0.6, 0.8, 1 and y = 0, 0.02, 0.04, 0.06, 0.08, 0.1). Sol-gel method was employed for synthesizing these hexagonal ferrites. The XRD plots of all studied materials which were annealed at 1250 °C show single phase characteristics. Lattice parameter ‘c’ increased as a consequence of larger radius of rare earth ion (Nd³⁺) as compared to (Fe³⁺), while lattice parameter ‘a’ showed very small variation. The cell volume was obtained in the range 2508.32–2523.75 (ų). The inclusion of Nd-Ni also affected X-ray density, bulk density and porosity. The FTIR spectroscopy indicated the particular absorption peaks of hexagonal ferrites and it was performed in the range of 500–700 cm^?1. On account of Nd-Ni doping, the dielectric constant, dielectric loss and AC-conductivity showed decreasing trend. The occupancy of Nd³⁺ ions at octahedral site impedes the valence alternation of Fe³⁺; therefore there was decrease in dielectric permittivity. Ac conductivity has been decreased from 9.14 to 6.49 (Ω cm)^?1 at frequency of 2.7 GHz. The Cole-Cole plots of synthesized materials noticeably revealed grain boundary contribution. The appearance of single semi-circle in impedance Cole-Cole graphs confirms the exceptional role of grain boundaries in the conduction process. The considerably lower dielectric parameters of investigated nano X-type ferrites propose their feasibility for high-frequency applications (phase shifters, dielectric resonators, stealth technology etc).     

3，4-二氢吡咯[2，1-c][1，4]噘嗪-1-酮及其7-芳酰基衍生物的设计与合成

以2-吡咯基三氯乙酮为主要原料,经过乙二醇单酯化、羟基氯取代、环合三步反应制得了3,4-二氢吡咯[2,1-c][1,4]噁嗪-1-酮;又经过Friedel—Crafts酰基化和环合反应制得了未见文献报道的7-芳酰基-3,4-二氢吡咯[2,1-c][1,4]噁嗪-1-酮它们及其某些重要中间体的结构分别采用红外光谱、质谱、核磁共振氢谱、核磁共振碳谱以及高分辨率质谱进行了表征．     

哈尔滨地区汛期径流量变化趋势与复杂性分析

区域水文要素复杂性研究是当今的热点问题,为了研究哈尔滨地区汛期径流量的复杂性特征及变化趋势,将R/S分析法和等概率粗粒化LZC算法引入到区域径流复杂性分析与变化趋势预测中,对地区内10个水文站点的汛期径流序列的复杂性进行诊断并对其变化趋势进行分析。研究结果表明:哈尔滨、通河、阿城、依兰、烟囱山各站未来的汛期径流量呈减少趋势,岔林河、莲花、西北河、延寿、四平山各站未来的汛期径流量呈增长趋势;各站点汛期径流序列的复杂度由高到低依次为:四平山、烟囱山、岔林河、阿城、西北河、依兰、莲花、通河、哈尔滨、延寿;从河流集水面积对其径流长程相关性和复杂性的影响可以看出,站点的河流集水面积越大,其径流量的长程相关性越强,复杂性指数越小。研究成果揭示了本地区汛期径流量的变化趋势以及复杂性演变特征,该特征可为区域径流预测及水资源优化配置提供科学依据。     

First-principles study of the double perovskites Sr<Subscript>2</Subscript>XOsO<Subscript>6</Subscript> (X = Li,Na, Ca) for spintronics applications

We investigated double perovskite compounds of the form Sr ₂ XOsO ₆ (X = Li, Na, Ca) using the full-potential linearized augmented plane wave (FP-LAPW) method. For the exchange-correlation energy, Wu and Cohen generalized gradient approximation (WC-GGA), Perdew, Burke and Ernzerhof GGA (PBE-GGA), Engel and Vosko GGA (EV-GGA), and GGA plus Hubbard U-parameter (GGA + U) were used. The calculated structural parameters are in good agreement with the existing experimental results. Calculation of different elastic constants and elastic moduli reveals that these compounds are elastically stable and possess ductile nature. The GGA + U approach yields quite accurate results of the bandgap as compared with the simple GGA schemes. The density of states plot shows that Sr-4d, Os-5d and O-2p states predominantly contribute to the conduction and valence bands. Further, our results regarding to the magnetic properties of these compounds reveal their ferromagnetic nature. In addition, these compounds seem to possess half-metallic properties, making them useful candidates for applications in spintronics devices.     

Selective extraction and detection of noble metal based on ionic liquid immobilized silica gel surface using ICP-OES

In this study, an efficiently employed ionic liquid combined with commercially available silica gel (SG–ClPrNTf₂) was developed for selective detection of gold(III) by use of inductively coupled plasma–optical emission spectrometry (ICP-OES). The selectivity of SG–ClPrNTf₂ was evaluated towards seven metal ions, including Y(III), Mn(II), Zr(IV), Pb(II), Mg(II), Pd(II) and Au(III). Based on pH study and distribution coefficient values, the SG–ClPrNTf₂ phase was found to be the most selective towards Au(III) at pH 2 as compared to other metal ions. The adsorption isotherm of Au(III) on the SG–ClPrNTf₂ phase followed the Langmuir model with adsorption capacity of 59.48 mg g^?1, which was highly in agreement with experimental data of adsorption isotherm study. The kinetics study indicated that Au(III) adsorption kinetics data were well fit with the pseudo-second-order kinetic model on the basis of correlation coefficient fitting (0.996) and adsorption capacity agreement (62.26 mg g^?1). Furthermore, SG–ClPrNTf₂ phase was effectively performed for the determination of Au(III) in real water samples with satisfactory results.     

Controllability of buildings: A multi-input multi-output stability assessment method for buildings with slow acting heating systems

The paper describes a methodology to assess the controllability of a building and its servicing systems, such as heating, lighting and ventilation. The knowledge for these methods has been transferred from design processes and methods used in the design of aircraft flight control systems to establish a modelling and design process for assessing the controllability of buildings. The paper describes a holistic approach to the modelling of the nonlinear and linear dynamics of the integrated building and its systems. This model is used to analyse the controllability of the building using Nonlinear Inverse Dynamics controller design methods used in the aerospace and robotics industry. The results show that this design approach can help the architects in their decisions on which building design and services to use. Furthermore, the results demonstrate how the same method can assist the control systems designer in developing complex control systems especially for buildings designed with a climate adaptive building (CAB) philosophy.     

Time stepping in discontinuous Galerkin method

The time discretization in the Discontinuous Galerkin (DG) scheme has been traditionally based on the Total Variation Diminishing (TVD) second-order Runge-Kutta (RK2) scheme. Computational efficiency and accuracy with the Euler Forward (EF) and the TVD second-order RK2 time stepping schemes in the DG method are investigated in this work. Numerical tests are conducted with the scalar Burgers equation, 1-D and 2-D shallow water flow equations. The maximum Courant number or time step size required for stability for the EF scheme and RK2 scheme with different slope limiters are compared. Numerical results show that the slope limiters affect the stability requirement in the DG method. The RK2 scheme is generally more diffusive than the EF scheme, and the RK2 scheme allows larger time step sizes. The EF scheme is found to be more efficient and accurate than the RK2 scheme in the DG method in computation.     

An efficiency measurement model for a computerized warehousing system

This paper introduces a model for efficient utilization of warehouse personnel in an inventory selection process. A simple mathematical model, based on a time study that can be applied to establishing standards for efficiency measurement of labour in a warehouse setting is presented. The problem of determining a standard to compute performance in an environment with variable workload is solved by using an adjustable standard for each particular assignment. Specifically the proposed model is designed to estimate the time required to complete a picking cycle. Three time components are considered; the lead time, travel time, and non-efficient time. The results of an empirical study are used to set the values of system parameters.

The use of a computer system that can generate order lists is essential for an effective application of this methodology. Useful information can be obtained that can aid managers in formulating and implementing incentive plans and for controlling the labour cost which represents a major proportion of the total cost in warehouse operation.