Comparison between normal and reverse thin crystalline silicon solar cells

The newly developed ingot growing techniques, as the three-grain and the columnar multigrain ingot processes, are now offering the possibility of slicing thinner wafers (≤ 100 μm). In this paper we present the results obtained on p type large area (≥ 100 cm²) and 100 μm thick wafers by using both conventional and reverse cell manufacturing technologies.The conventional cells are provided with aluminium or boron BSF plus screen-printed silver mirror or a silver-aluminium net; the reverse cells have a FSF and the deep back junction completely covered by a screen-printed or CVD silver layer.The constructing parameters have been chosen on the base of one and two dimensions modeling and both raw material and devices have been completely characterized.This work shows that very thin wafers do not introduce serious problems for the conventional manufacturing of solar cells. The efficiencies of the normal and of the reverse cells are found to be comparable and are of the same order than those of thicker cells, however at a significant lower cost. The main obtained result has to be related to the demonstration of a cell manufacturing feasibility starting from very thin wafers.     

Superior activity of a thromboxane receptor antagonist as compared with aspirin in rat models of arterial and venous thrombosis

We determined the effects of aspirin and a novel thromboxane A2/prostaglandin endoperoxide (TP)-receptor antagonist, BMS-180291, on thrombosis and bleeding times in skin and mesenteric arteries. In anesthetized rats, occlusive thrombosis was induced in the carotid artery by topical application of ferrous chloride and in the vena cava by blood flow stasis combined with either infusion of thromboplastin or hypotonic saline. Aspirin (1, 10, and 50 mg/kg) did not reduce arterial or venous thrombus weight significantly. BMS 180,291 (150 micrograms/kg/min) decreased arterial thrombus weight and hypotonic saline-induced caval thrombus weight by 58 and 57%, respectively. BMS-180291 lacked antithrombotic activity at a lower dose (50 micrograms/kg/min) and failed to inhibit thromboplastin-induced caval thrombosis. BMS-180291 (150 micrograms/kg/min) significantly reduced arterial thrombus weight by 40% when plasma epinephrine concentration was increased to 5 ng/ml. BMS-180291 and aspirin produced increases of only < or = 30% in bleeding times. These results demonstrate that BMS-180291 has antithrombotic activity in experimental aspirin-resistant arterial and venous thrombosis. Both aspirin and BMS-180291 have only modest effects on small artery hemostasis in rats.     

Effect of cooking on the chemical composition of lentils,rice and their blend (Koshary)

Lentils, rice and their blend (Koshary) were cooked by traditional Egyptian methods. Cooking resulted in slight changes in the total nitrogen, as well as in the non-protein nitrogen (NPN), ether extract and crude fibre of the three products, compared with raw grains. In contrast, significant decreases were found in the mineral elements, indicating losses through leaching, on washing and cooking. The mineral composition of lentils' cooking liquor confirmed this.     

What defense doesSchouwia purpurea (Cruciferae) have against the desert locust?

A field study of the food eaten by solitary desert locusts was carried out in a winter breeding area in Mauritania. The food eaten, determined by the plant epidermis found in fecal pellets, was compared to the plant's availability in the habitat.Schouwia purpurea, well represented in the diets, was dominant at the study site. Adults had a preference forTribulus terrester. Growth and feeding on these two plants were compared. The high water content ofS. purpurea leaves limited the dry matter eaten and slowed down growth. Glucosinolates were separated and quantified by gas chromatography. There are 132mol/g dry matter in green leaves. In multiple choice tests, with paper disks, glucosinolate extracts were phagostimulant at a low concentration (21mol/g dry matter) and repulsive at a higher one (214mol/ g dry matter). Biting behavior onS. purpurea was recorded and analyzed on video. The importance ofSchouwia purpurea in desert locust habitats and its defenses is discussed.     

Physicochemical properties of irradiated and loaded LDPE films with polyfunctional monomers

Polyfunctional monomers (PFMs), namely, trimethylol propane trimethacrylate (TMPTMA), trimethylol propane triacrylate, ethylene glycol dimethacrylate, and diethylene glycol diacrylate were blended with low‐density polyethylene (LDPE) and exposed to different doses of EB irradiation. Fourier transform infrared and ultraviolet and UV–vis spectroscopy of the unirradiated, irradiated, unloaded, and PFMs‐loaded LDPE films were studied under various irradiation doses up to 300 kGy. The degree of crosslinking and oxidative degradation, as measured by the spectroscopic parameters, were dependent on both the irradiation dose and the type of loaded PFMs. For all of the loaded monomers, the extent of crosslinking increased at different rates as a function of irradiation dose. TMPTMA monomer was the most efficient in enhancing the crosslinking of LDPE films compared to the other loaded monomers. However, the unloaded LDPE film showed the least extent of crosslinking. In addition, the EB‐radiation‐induced changes, such as trans‐vinylene formation, a decrease in vinyl and vinylidene unsaturation; and carbonyl double‐bond formation and change in crystallinity were correlated. The importance of these results on the prediction of the role of polyfunctional monomers in the production of crosslinked polymers is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2025–2035, 2003     

The reference temperature dependence of Young’s modulus of two-temperature thermoelastic damping of gold nano-beam

This work is concerning with the study of the thermoelastic damping of a nanobeam resonator in the context of the two-temperature generalized thermoelasticity theory. An explicit formula of thermoelastic damping has been derived when Young’s modulus is a function of the reference temperature. Influences of the beam height and Young’s modulus have been studied with some comparisons between the Biot model and the Lord–Shulman model (L–S) for one- and two-temperature types. Numerical results show that the values of the thermal relaxation parameter and the two-temperature parameter have a strong influence on thermoelastic damping at nanoscales.     

A probabilistic reputation model based on transaction ratings

This work introduces a probabilistic model allowing to compute reputation scores as close as possible to their intrinsic value, according to the model. It is based on the following, natural, consumer-provider interaction model. Consumers are assumed to order items from providers, who each has some intrinsic, latent, “quality of service” score. In the basic model, the providers supply the items with a quality following a normal law, centered on their intrinsic “quality of service”. The consumers, after the reception and the inspection of the item, rate it according to a linear function of its quality - a standard regression model. This regression model accounts for the bias of the consumer in providing ratings as well as his reactivity towards changes in item quality. Moreover, the constancy of the provider in supplying an equal quality level when delivering the items is estimated by the standard deviation of his normal law of item quality generation. Symmetrically, the consistency of the consumer in providing similar ratings for a given quality is quantified by the standard deviation of his normal law of ratings generation. Two extensions of this basic model are considered as well: a model accounting for truncation of the ratings and a Bayesian model assuming a prior distribution on the parameters. Expectation-maximization algorithms, allowing to estimate the parameters based on the ratings, are developed for all the models. The experiments suggest that these models are able to extract useful information from the ratings, are robust towards adverse behaviors such as cheating, and are competitive in comparison with standard methods. Even if the suggested models do not show considerable improvements over other competing models (such as Brockhoff and Skovgaard’s model [12]), they, however, also permit to estimate interesting features over the raters - such as their reactivity, bias, consistency, reliability, or expectation.     

3D characterization of hot metallic shells during industrial forging

During industrial forging of hot metallic shells, it is necessary to regularly measure the dimensions of the parts, especially the inner and outer diameters and the thickness of the walls. A forging sequence lasts 2 h or more during which the diameter of the shell is regularly measured in order to decide when to stop the forging process. For better working conditions, for the safety of the blacksmiths, and for a faster and more accurate measurement, we have developed a novel system based on two commercially available time of flight laser scanners for the measurement of the diameters of hot cylindrical metallic shells during the forging process. The advantages of using laser scanners are that they can be placed very far from the hot shell, more than 15 m, while at the same time giving an accurate point cloud from which three-dimensional views of the shell can be reconstructed and diameter measurements done. Moreover, more accurate measurement is achieved in less time with the laser system than with the conventional method using a large ruler. The system has been successfully used to measure the diameters of hot cylindrical metallic shells.     

Grid-Controlled Lightpaths for High Performance Grid Applications

Grid applications call for high performance networking support. One attractive solution is to deploy Grids over optical networks. However, resource management in optical domains is traditionally very rigid and cannot successfully meet the requirements of Grid applications, such as flexible provisioning and configuration. In this paper, we present a customizable resource management solution for optical networks where users can create lightpaths on demand and manage their own network resources. Thanks to a Grid-centric system architecture, lightpath resources can be shared among users and easily integrated with data and computation Grids.