Chromium evaporation and oxidation characteristics of alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells

The chromium (Cr) evaporation behavior of several different types of iron (Fe)-based AFA alloys and benchmark Cr₂O₃-forming Fe-based 310 and Ni-based 625 alloys was investigated for 500 h exposures at 800 °C to 900 °C in air with 10% H₂O. The Cr evaporation rates from alumina-forming austenitic (AFA) alloys were ~5 to 35 times lower than that of the Cr₂O₃-forming alloys depending on alloy and temperature. The Cr evaporation behavior was correlated with extensive characterization of the chemistry and microstructure of the oxide scales, which also revealed a degree of quartz tube Si contamination during the test. Long-term oxidation kinetics were also assessed at 800 to 1000 °C for up to 10,000 h in air with 10% H₂O to provide further guidance for SOFC BOP component alloy selection.     

Body effects on SAR distributions for microwave exposures in a realistic model of the human head.

The finite-difference time-domain (FDTD) simulations of specific absorption rate (SAR) in a human head exposed to microwaves have, to date, been carried out on models of the head only. This was because it was believed that the body effects on the average SAR of the head could be ignored at high frequencies of around 1 GHz. That opinion, however, was based on inappropriate calculation conditions and is therefore unreliable. In this paper, we have re-examined the body effects on the SAR distributions in a realistic homogeneous model of the adult head exposed to microwaves. We found that the SAR on the eye surface of the head-only model exposed to E-polarized waves was 31% smaller than that of the whole-body model at 900 MHz, and 43% larger at 1.5 GHz. For a size that can practically be considered whole-body, it is necessary to have the top of the head to the belly for 900 MHz and to the chest area for 1.5 GHz. The previously unclear body effects of H-polarized waves were assumed to be less than those of E-polarized waves, suggesting that the chest area would be sufficient for both frequencies.     

Problem pharmaceutical patents

These days, the number of pharmaceutical patent applications which do not specify the principal active ingredient in the form of a chemical name or structure is increasing. These patents are difficult to retrieve in retrospective on-line searches using chemical structures or keywords. Furthermore, even if you could find them, the situation with regard to patentability is obscure and this causes considerable problems for the experts in charge of the patent search. If you are a searcher for a large pharmaceutical company, you might already be apprehensive of infringing such patents. We, the JFA,^* gathered these patents together and studied the differences between their patentability in Japan, the US and the EPO.     

Synthesis and properties of N,N'-unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s

N,N'- Unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s (in which alkyl = methyl, ethyl, propyl, butyl, isobutyl, pentyl, hexyl and octyl) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with the appropriate alkyl-amines. The properties of these derivatives as pigments were tested and their thermal stability measured.     

Synthesis and properties of N-alkyl-N′-aryl-3,4:9,10-perylenebis(dicarboximide)

N′-Alkyl-N′-aryl-3,4:9,10-perylenebis(dicarboximide) (alkyl = isobutyl, pentyl, hexyl, octyl, etc.; aryl = phenyl, p-tolyl, p-methoxyphenyl, etc.) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with arylamines (aniline, p-toluidine, p-anisidine, o-phenylenediamine, etc.). The properties of these derivatives as pigments were tested, and also the thermal stability of 3,4:9,10-perylenebis(dicarboximide) derivatives was measured.     

Development of a new heterojunction structure (ACJ -HIT) and its application to polycrystalline silicon solar cells

A new solar cell structure named HIT (Heterojunction with Intrinsic Thin layer) has been developed based on new artificially constructed junction (ACJ) technology. In this structure a non-doped a-Si thin layer was inserted between the p(a-Si)/n(c-Si) heterojunction, improving the output characteristics and achieving a conversion efficiency of 18.1%. This structure was applied to cast polycrystalline silicon solar cells of a practical size. A high conversion efficeincy of 13.6% was obtained with a cell size of 10 cm × 10 cm using various technologies, including hydrogen plasma passivation.     

Solar-powered air conditioner

We have successfully developed and industrialized a solar-powered air conditioner that operates through a combination of photovoltaic (PV) arrays and commercial power supplies. In order to achieve the most efficient operation possible from a one-horsepower inverter-type household air conditioner, we selected a PV array output of 540 W under standard test conditions, based on single-day power use patterns for air conditioners as well as on solar cell output patterns. When using a 540-W PV array, we have shown that the system can supply at least 90% of the power consumed by an air conditioner during peak power periods in summer. We have confirmed that on average the power generated by the PV array can satisfy at least 50% of the power consumed by an air conditioner in summer. We also confirmed that the system functions according to system design specifications. There is little doubt that the introduction and widespread use of this system will play an important role in reducing peak power energy requirements in summer.     

Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.     

Chain matching between hydrocarbon and fatty acid as interfacial phenomena

According to the investigations of Cameron and his coworkers^1–5 into the chain-matching phenomena between normal paraffin as a solvent and straight-chain fatty acid as an additive, the optimum condition in boundary lubrication is attained when the chain lengths of the additive and solvent are equal. A series of experiments has been conducted over the past ten years on the role of the chain-matching effect, not only on boundary lubrication but also widely on relevant interfacial phenomena. The results of the investigations are discussed.